The weight of author self-citations. A fractional approach to self-citation counting

The discussion about how to treat author self-citations driven by policy application and quality measurement intensified in the last years. The definition introduced by Snyder and Bonzi has — in lack of any reasonable alternative — been used in bibliometric practice for science policy purposes. This method, however, does not take into account the weight of self-citing authors among coauthors of both the cited and citing papers. The objective of the present paper is to quantify the weight of self-citations with respect to co-authorship. The analysis is conducted at two levels: at the macro level, namely, for fifteen subject fields and the most active forty countries, and at the meso level, for a set of selected research institutions.     

1310-nm DBR-type MQW gain-clamped semiconductor optical amplifiers with AM-CATV-grade linearity

A 1310-nm gain clamped semiconductor optical amplifier with amplitude modulation CATV-grade linearity at an output power of 8 mW is demonstrated for the first time. The InGaAsP multiquantum-well laser amplifier is equipped with distributed Bragg reflectors at each end to supply the feedback necessary for gain clamping. The TE optical gain of 21.3 dB is measured to be constant within 0.1 dB up to 25-mW signal output power. Electrical signal distortion experiments are presented to demonstrate the linearity of the device.     

Modeling membrane proteins based on low-resolution electron microscopy maps: a template for the TM domains of the oxalate transporter OxlT

The availability of both EM and high-resolution crystallographic data for several membrane proteins (MPs) permits a detailed evaluation of the ability of molecular modeling techniques to complement EM data in the development of models of MPs. A protocol for this purpose is presented, consisting of (1) identifying transmembrane (TM) domains from sequence; (2) assigning buried and lipid-exposed faces of the TM domains; and (3) assembling the TM domains into a bundle, based on geometric restraints obtained from the EM data. The protocol is validated by predicting the structures of several 7- and 12-TM MPs to within 3-5 A r.m.s.d. from their crystal structures. The protocol is applied to generate a model of the oxalate transporter OxlT, for which a high-resolution structure is not yet available.     

High-resolution CFD simulations for forced convective heat transfer coefficients at the facade of a low-rise building

High-resolution 3D steady RANS CFD simulations of forced convective heat transfer at the facades of a low-rise cubic (10 × 10 × 10 m³) building are performed to determine convective heat transfer coefficients (CHTC). The focus is on the windward facade. CFD validation is performed based on wind tunnel measurements of velocity and heat transfer for reduced-scale cubic models. The CFD simulations employ a high-resolution grid with, for the 10 m cubic building, cell centres at a minimum distance of 160 μm from the building surface to resolve the entire boundary layer, including the viscous sublayer and the buffer layer, which dominate the convective surface resistance. The results show that: (1) the wind flow around the building results in highly varying CHTC values across the windward facade; (2) standard and non-equilibrium wall functions are not suitable for CHTC calculation, necessitating either low-Reynolds number modelling or specially-adapted wall functions; (3) at every facade position, the CHTC is a power-law function of the mean wind speed; (4) the CHTC distribution at the windward facade is relatively insensitive to wind direction variations in the 0–67.5° angle range; (5) the CHTC shows a stronger spatial correlation with the turbulent kinetic energy than with the mean wind speed across the facade; and (6) the CHTC distribution across the windward facade is quite similar to the distribution of wind-driven rain (WDR), with both parameters reaching high levels near the top edge of the facade. This suggests that also the convective moisture transfer coefficient will be higher at this location and that the facade parts that receive most WDR might also experience a higher drying rate.     

Improved author profiling through the use of citation classes

The method of Characteristic Scores and Scales (CSS), previously developed for application at the macro- and meso-level, has been applied to individual author statistics. In particular, two datasets have been used. Firstly, authors with Thomson Reuters Researcher-ID, independently of the field where authors are publishing and, secondly, authors who are active in the field of scientometrics, independently whether they are registered authors or not. The objective is to find a parameter-free solution for citation-impact assessment at this level of aggregation that is insensitive to possible outliers. As in the case of any statistics, the only limitation is the lower bound, which has been set to 10 for the present analysis. The results demonstrate the usefulness of the CSS method at this level while also pointing to some remarkable statistical properties.     

A noninvasive system-level model order reduction scheme for flexible multibody simulation

This paper presents a novel system-level model order reduction scheme for flexible multibody simulation, namely the system-level affine projection (SLAP). Contrary to existing system-level model order reduction approaches for multibody systems simulation, this methodology allows to obtain a constant reduced order basis which can be obtained in a noninvasive fashion with respect to the original flexible multibody model. It is shown that this scheme enables an automatic joint constraint elimination which can be obtained at low computational cost through exploitation of the component level modes typically employed in flexible multibody simulation. The equations of motion are derived such that the computational cost of the resulting SLAP model is independent of the original model size. This approach results in a set of ordinary differential equations with a constant mass matrix and nonlinear internal forces. This structure makes the resulting model suitable for a range of estimation, control, and design applications. The proposed approach is validated numerically on a flexible four-bar mechanism and shows good accuracy for a very low-order SLAP model.     

Fast, ultrasensitive virus detection using a Young interferometer sensor

We report the application of an integrated optical Young interferometer sensor for ultrasensitive, real-time, direct detection of viruses. We have validated the sensor by detecting herpes simplex virus type 1 (HSV-1), but the principle is generally applicable. Detection of HSV-1 virus particles was performed by applying the virus sample onto a sensor surface coated with a specific antibody against HSV-1. The performance of the sensor was tested by monitoring virus samples at clinically relevant concentrations. We show that the Young interferometer sensor can specifically and sensitively detect HSV-1 at very low concentrations (850 particles/mL). We have further demonstrated that the sensor can specifically detect HSV-1 suspended in serum. Extrapolation of the results indicates that the sensitivity of the sensor approaches the detection of a single virus particle binding, yielding a sensor of unprecedented sensitivity with wide applications for viral diagnostics.     

A study of the microstructural evolution during selective laser melting of Ti–6Al–4V

Selective laser melting (SLM) is an additive manufacturing technique in which functional, complex parts can be created directly by selectively melting layers of powder. This process is characterized by highly localized high heat inputs during very short interaction times and will therefore significantly affect the microstructure. In this research, the development of the microstructure of the Ti–6Al–4V alloy processed by SLM and the influence of the scanning parameters and scanning strategy on this microstructure are studied by light optical microscopy. The martensitic phase is present, and due to the occurrence of epitaxial growth, elongated grains emerge. The direction of these grains is directly related to the process parameters. At high heat inputs it was also found that the intermetallic phase Ti₃Al is precipitated during the process.