Protein,casein, and micellar salts in milk: Current content and historical perspectives

The protein and fat content of Dutch bulk milk has been monitored since the 1950s and has increased considerably, by 11 and 20%, respectively, whereas milk yield has more than doubled. The change in protein and fat content of milk is advantageous for the dairy industry, as these are the 2 most economically valuable constituents of milk. Increases in protein and fat content of milk have allowed increases in the yield of various products such as cheese and butter. However, for cheese and other applications where casein micelles play a crucial role in structure and stability, it is not only casein content, but also the properties of the casein micelles that determine processability. Of particular importance herein is the salt partition in milk, but it is unknown whether increased protein content has affected the milk salts and their distribution between casein micelles and milk serum. It was, therefore, the objective of this research to determine the salt composition and protein content for individual cow milk and bulk milk over a period of 1 yr and to compare these data to results obtained during the 1930s, 1950s, and 1960s in the last century. Calcium, magnesium, sodium, potassium, and phosphorus content were determined by inductively coupled plasma atomic emission spectrometry and inorganic phosphate, citrate, chloride, and sulfate content by anion-exchange chromatography in bulk milk and milk ultracentrifugate. In addition, ionic calcium and ionic magnesium concentration were determined by the Donnan membrane technique. We concluded that historical increase in milk yield and protein content in milk have resulted in correlated changes in casein content and the micellar salt fraction of milk. In addition, the essential nutrients, calcium, magnesium, and phosphorus in milk have increased the past 75 yr; therefore, the nutritional value of milk has improved.     

Genome-wide association study for αS1- and αS2-casein phosphorylation in Dutch Holstein Friesian

Phosphorylation of caseins (CN) is a crucial post-translational modification that allows caseins to form colloid particles known as casein micelles. Both α_S1- and α_S2-CN show varying degrees of phosphorylation (isoforms) in cow milk and were suggested to be more relevant for stabilizing internal micellar structure than β- and κ-CN. However, little is known about the genetic background of individual α_S2-CN phosphorylation isoforms and the phosphorylation degrees of α_S1- and α_S2-CN (α_S1-CN PD and α_S2-CN PD), defined as the proportion of isoforms with higher degrees of phosphorylation in total α_S1- and α_S2-CN, respectively. We aimed to identify genomic regions associated with these traits using 50K single nucleotide polymorphisms for 1,857 Dutch Holstein Friesian cows. A total of 10 quantitative trait loci (QTL) regions were identified for all studied traits on 10 Bos taurus autosomes (BTA1, 2, 6, 9, 11, 14, 15, 18, 24, and 28). Regions associated with multiple traits were found on BTA1, 6, 11, and 14. We showed 2 QTL regions on BTA1, one affecting α_S2-CN production and the other harboring the SLC37A1 gene, which encodes a phosphorus antiporter and affects α_S1- and α_S2-CN PD. The QTL on BTA6 harbors the casein gene cluster and affects individual α_S2-CN phosphorylation isoforms. The QTL on BTA11 harbors the PAEP gene that encodes for β-lactoglobulin and affects relative concentrations of α_S2-CN-10P and α_S2-CN-11P as well as α_S1-CN PD and α_S2-CN PD. The QTL on BTA14 harbors the DGAT1 gene and affects relative concentrations of α_S2-CN-10P and α_S2-CN-11P as well as α_S1-CN PD and α_S2-CN PD. Our results suggest that effects of identified genomic regions on phosphorylation of α_S1- and α_S2-CN are related to changes in milk synthesis and phosphorus secretion in milk. The actual roles of SLC37A1, PAEP, and DGAT1 in α_S1- and α_S2-CN phosphorylation in Dutch Holstein Friesian require further investigation.     

Influence of partially demineralized milk proteins on rheological properties and microstructure of acid gels

Innovative clean label processes employed in the manufacture of acid gels are targeted to modify the structure of proteins that contribute to rheological properties. In the present study, CO₂-treated milk protein concentrate powder with 80% protein in dry matter (TMPC80) was mixed with nonfat dry milk (NDM) in different ratios for the manufacture of acid gels. Dispersions of NDM and TMPC80 that provided 100, 90, 70, and 40% of protein from NDM were reconstituted to 4.0% (wt/wt) protein and 12.0% (wt/wt) total solids. Dispersions were adjusted to pH 6.5, followed by heat treatment at 90°C for 10 min. Glucono-δ-lactone was added and samples were incubated at 30°C, reaching pH 4.5 ± 0.05 after 4 h of incubation. Glucono-δ-lactone levels were adjusted to compensate for the lower buffering capacity of samples with higher proportions of TMPC80, which is attributable to the depletion of buffering minerals from both the serum and micellar phase during preparation of TMPC80. Sodium dodecyl sulfate-PAGE analysis indicated a higher amount of caseins in the supernatant of unheated suspensions with increasing proportions of CO₂-treated TMPC80, attributable to the partial disruption of casein micelles in TMPC80. Heat treatment reduced the level of whey proteins in the supernatant due to the heat-induced association of whey proteins with casein micelles, the extent of which was larger in samples containing more micellar casein (i.e., samples with a lower proportion of TMPC80). Particle size analysis showed only small differences between nonheated and heated dispersions. Gelation pH increased from ?5.1 to ?5.3, and the storage modulus of the gels at pH 4.5 increased from ?300 to ?420 Pa when the proportion of protein contributed by TMPC80 increased from 0 to 60%. Water-holding capacity also increased and gel porosity decreased with increasing proportion of protein contributed by TMPC80. The observed gel properties were in line with microstructural observations by confocal microscopy, wherein sample gels containing increasing levels of TMPC80 exhibited smaller, well-connected aggregates with uniform, homogeneous pore sizes. We concluded that TMPC80 can be used to partially replace NDM as a protein source to improve rheological and water-holding properties in acid gels. The resultant gels also exhibited decreased buffering, which can improve the productive capacity of yogurt manufacturing plants. Overall, the process can be leveraged to reduce the amount of hydrocolloids added to improve yogurt consistency and water-holding capacity, thus providing a path to meet consumer expectations of clean label products.     

Patterning SiC nanoprecipitate in Si single crystals by simultaneous dual- beam ion implantation

β–SiC nanoprecipitates can be patterned in crystalline silicon with an almost monomodal size distribution by simultaneous-dual-beam of C⁺ and Si⁺ ion implantations at 550 °C. Their shape appears as spherical (average diameter ~4–5 nm) ,and they are in epitaxial relationship with the crystalline silicon matrix. The narrow size distribution follows the left wing of the carbon distribution where the nuclear ion stopping, and thus the point defect generation rate is largest. This observation allows us to conclude that the induced damage act as sinks for C atoms leading to the SiC nanoprecipitates formation centered at the maximum of the simulated damage distribution. The nuclear reaction analysis, X-ray diffraction, Raman spectroscopy, and transmission electron microscopy techniques were used to characterize the samples.     

Aerobic growth and survival of Campylobacter jejuni in food and stream water

OBJECTIVE: To search differentially expressed sequences correlated with pathogenesis of human nasopharyngeal carcinoma (NPC), including the candidates of tumor suppressor genes. METHODS: cDNA representational difference analysis (RDA) was performed to isolate differentially expressed sequences between cDNA from normal human primary cultures of nasopharyngeal epithelial cells and cDNA from NPC cell line HNE1. The sources of differentially expressed products were proved by Southern blot and Northern blot. The fragments were cloned with pGEM-T easy kit and sequenced by the chain termination reaction. RESULTS: Four differentially expressed cDNA fragments were isolated in the fourth subtractive hybridization using cDNA from normal human primary cultures of nasopharyngeal epithelial cells as tester amplicon and cDNA from NPC cell line HNE1 as driver amplicon by cDNA RDA. These differential cDNA fragments revealed that they really came from the tester amplicon and were not expressed or down-regulated in the NPC HNE1 cells. Of these obtained clones, some are the fragments of the human known genes including house-keeping genes, the others are novel genes. CONCLUSION: NPC involves alteration of multiple genes. Some of known genes matched with the differentially expressed sequences have an effective suppressive ability on the carcinoma.     

A 1 K×1 K high dynamic range CMOS image sensor with on-chipprogrammable region-of-interest readout

An integrated 1024×1024 CMOS image sensor with programmable region-of-interest (ROI) readout and multiexposure technique has been developed and successfully tested. Size and position of the ROI is programmed based on multiples of a minimum readout kernel of 32×32 pixels. Since the dynamic range of the irradiance normally exceeds the electrical dynamic range of the imager that can be covered using a single integration time, a multiexposure technique has been implemented in the imager. Subsequent sensor images are acquired using different integration times and recomputed to form a single composite image. A newly developed algorithm performing the recomputation is presented. The chip has been realized in a 0.5-μm n-well standard CMOS process. The pixel pitch is 10 μm² and the total chip area is 164 mm ²     

Scheduling Multispecialty Clinics Using Integer Programming

This paper describes an integer programming approach to scheduling multispecialty outpatient clinics in a university health center. Using maximum expected cross-consultations as an objective, approximately thirty clinics have been scheduled for a five-day cycle. Each clinic has its own medical staff but shares space, personnel, and ancillary services with other clinics on a rotating basis. If two specialties requiring cross-consultation do not meet at the same time, the consultation process is impaired. The clinics must also be scheduled such that the available capacities of the common resources are not exceeded. In addition, the scheduling process must consider other constraints such as the commitments of the physicians to teaching, hospital rounds, and operating room schedules. This problem has been formulated and solved as a 0-1 integer quadratic program to maximize the expected cross-consultation volume subject to constraints on shared resources. The paper discusses the process by which required input data were collected and the results of the implementation of the model.