Proton beam writing and electroplating for the fabrication of high aspect ratio Au microstructures

We present an approach to fabricate tall high aspect ratio Au microstructures by means of proton beam direct writing. Combining proton beam direct writing and electroplating, we successfully produced gold structures with sub-micrometer lateral dimensions, structure heights in excess of 11 μm, and aspect ratios over 28. Sidewall quality of the Au structures was improved by lowering the process temperature to 20 °C when developing PMMA patterns with GG developer. The application of such structures as X-ray masks for deep X-ray lithography with synchrotron radiation was demonstrated.     

Processing of the quench detection signals in W7-X

The Wendelstein 7-X (W7-X) project uses superconductive coils for generation of the magnetic field to keep the plasma. One of the important safety systems is the protection against quench events. The quench detection system of W7-X protects the superconducting coils, the superconducting bus bar sections and the high temperature superconductor of the current leads against the damage because of a quench and against the high stress by a fast discharge of the magnet system.Therefore, the present design of the quench detection system (QDS) uses a two-stage safety concept for discharging the magnetic system. This paper describes the present design of the system assembly from the quench detection unit (QDU) for the detection of the quench to the quench detection interface (QDI) to implement the two-stage safety concept.     

Untersuchungen zum Transfer pharmakologisch wirksamer Substanzen aus der Nutztierhaltung in Porree und Weißkohl

Investigation on the transfer of pharmacologically active substances used in animal husbandry into leek and cabbage. The potential of leek and cabbage for uptake of highly prescribed veterinary drugs (antibiotics) was tested in hydroponically grown plants. For this purpose the antibiotics sulfadiazine (SFD), enrofloxacine (ENR), tetracycline (TC), chlortetracycline (CTC) and monensine (MON) were chosen. A further aim was to gain data on the situation of vegetables grown in agricultural practise with regard to antibiotic residues. The evident effects of the antibiotics on plants grown hydroponically (each antibiotic was administered at 5 μmol/l nutrient solution) were greatly different: With regard to leek there were no visible effects (MON, SFD), a weak bleaching of the younger leaf sections (CTC), and strong effects of ENR. The (phytotoxic) effects of antibiotics on cabbage were much more distinct. CTC caused a yellowing of the plant vasculature in cabbage. MON induced lesions on some leaves and finally led to leaf wilting. With administration of ENR a nearly complete bleaching of young leaves was observed. Using LC-MS/MS-methods (low-resolution and high-resolution MS) the administered antibiotics, as well as conversion products and metabolites, were separately identified and quantified in various organs of leek (roots, young and old sections of leaves) and cabbage (roots, stalks, young and old leaves). Depending on the type of antibiotic, vegetable species, and plant organ, the detected concentrations of antibiotic residues comprised several orders of magnitude ranging from μg/kg to mg/kg of fresh weight (fw). The highest concentrations of antibiotics were found in roots of both vegetable species: CTC and TC were detected at approximately 10 mg/kg fw in cabbage roots and at approximately 20 mg/kg fw in leek roots and ENR was determined at approximately 12 mg/kg fw in cabbage roots. Low amounts of ENR were metabolised to ciprofloxacine (CIP). ENR occurred at similar concentrations of approximately 7 mg/kg fw in roots and old leaves of cabbage, indicating a high transport rate of this antibiotic in the cabbage plant. In stalks, young and old leaves of cabbage and in young and old leaf sections of leek all administered antibiotics were detected. Within these antibiotics, ENR and CTC and their conversion products, e. g. demeclocycline (DMC) and TC, occurred at the highest concentrations. SFD and MON were found in considerably lower concentrations (<100 μg/kg fw). The results of our experiments in hydroponic cultures, using defined concentrations of antibiotics in the nutrient solution, evidently demonstrate that cabbage and leek have a very high potential for uptake of a number of veterinary antibiotic drugs, especially for tetracycline and ENR.     

Thermodynamic Modeling of the Miscibility Gaps and the Metastable Liquidi in the MgO-SiO2, CaO-SiO2, and SrO-SiO2 Systems

A range of compositions and temperatures below the monotectic temperature exists where there are thermodynamic restrictions that prevent the equilibrium solid from forming directly from the undercooled homogeneous liquid. In this region, the solid can form only after liquid-liquid phase separation has occurred. As suggested by earlier research, the thermodynamic restrictions on the crystallization process may be useful to control the crystallized grain structure in glass-ceramic systems. Thus, understanding the thermodynamic limitations on the formation of the solid in monotectic systems could have commercial significance. In the present paper, the metastable liquidus boundaries, liquid miscibility gaps, and spinodal curves in binary MgO-SiO₂, CaO-SiO₂, and SrO-SiO₂ systems are calculated by using analytical expressions for the Gibbs free energies of the liquid phases. Calculating the metastable liquidus rather than using a simple extrapolation as originally proposed in the aforementioned previous research provides greater control of the heat-treatment processes and, thus, greater control over the resulting microstructure.     

Draft angle and surface roughness effects on stereolithography molds

Stereolithography (SL) is a rapid prototyping process, which allows one to build complex shapes quickly. Current research investigates the possibilities of using this process to make injection molds. This would allow designers to manufacture and test molds easily and rapidly. One of the main issues with this technique is the effects of its surface on the part. Molds built by SL have high roughness. This gives rise to a high friction force between the part and the mold, and increases the ejection force needed to eject the part from the mold. High ejection forces often lead to damage or breakage of the part and the mold. Research was undertaken on the effects of draft angle and roughness on ejection forces. It was found that increasing the draft angle does not necessary assist the ejection of the part. As the draft angle increases, the roughness and hence the friction force between the part and the mold also increase. There is a trade‐off between draft angle and roughness. A model based on Glanvill's equation was developed to predict ejection force and was consistent with experimental results.     

Lipoxygenase Products in the Urine Correlate with Renal Function and Body Temperature but not with Acute Transplant Rejection

Acute transplant rejection is the leading cause of graft loss in the first months after kidney transplantation. Lipoxygenase products mediate pro- and anti-inflammatory actions and thus we aimed to correlate the histological reports of renal transplant biopsies with urinary lipoxygenase products concentrations to evaluate their role as a diagnostic marker. This study included a total of 34 kidney transplant recipients: 17 with an acute transplant rejection and 17 controls. LTE4, LTB4, 12-HETE and 15-HETE concentrations were measured by enzyme immunoassay. Urinary lipoxygenase product concentrations were not significantly changed during an acute allograft rejection. Nevertheless, LTB4 concentrations correlated significantly with the body temperature (P ≤ 0.05) 3 months after transplantation, and 12- and 15-HETE concentrations correlated significantly with renal function (P ≤ 0.05) 2 weeks after transplantation. In conclusion, our data show a correlation for LTB4 with the body temperature 3 months after transplantation and urinary 12- and 15-HETE concentrations correlate positively with elevated serum creatinine concentrations but do not predict acute allograft rejection.     

采用分布式孔径的红外敏感器系统（上）

第三代焦平面列阵与能力越来越强的信号处理算法的结合,正在使电光技术不断走向成熟,同时也给军用和非军用电光敏感器系统的设计指出了新的方向,目前,美国国防部正在利用这些进展研制一种可安装在各种战术平台上的分布式孔径红外敏感器系统（DAIRS）,这种DAIRS是利用多个相同的固定敏感器来获得其功能度的,而在以前,这种功能度是通过对每一种功能都使用专用的敏感器来获得的,在战术飞机上,DAIRS的作用是利用一个包含六个按战略要求的敏感器列阵,向飞行人员提供4π立体弧度的敏感器覆盖范围,即全球面情况察觉（SA）,这种察觉提供：导弹威胁告警,红外搜索与跟踪,战斗损害估计,目标导向辅助以及领航。DAIRS还可以为水面舰艇,装甲登陆车以及无人驾驶空战飞行器提供扩展的全球面情况察觉。敏感器的重量,体积以及电功率需求,一般不到现有机载红外敏感器系统的25％,而且系统实际运行成本可以大为降低,如果与自动提示技术相结合,DAIRS就有可能在用于空中防撞的飞机防撞告警的系统技术发展方面起重要作用。DAIRS目前得到了海军研究局的部分资助,这将可以生产两台原型敏感器和实验室测试所需的支持软件,多功能红外分布式孔径系统（MIDAS）是作为一项海军先进技术演示（6．3计划）而获得资金的,根据此项计划,DAIRS将于2000年用四个敏感器进行飞行试验,MIDAS将配备一种装在头盔上的用于情况察觉成像的显示器。