Tuning the Molecular Weight of the Electron Accepting Polymer in All‐Polymer Solar Cells: Impact on Morphology and Charge Generation

Molecular weight is an important factor determining the morphology and performance of all‐polymer solar cells. Through the application of direct arylation polycondention, a series of batches of a fluorinated naphthalene diimide‐based acceptor polymer are prepared with molecular weight varying from M_n = 20 to 167 kDa. Used in conjunction with a common low bandgap donor polymer, the effect of acceptor molecular weight on solar cell performance, morphology, charge generation, and transport is explored. Increasing the molecular weight of the acceptor from M_n = 20 to 87 kDa is found to increase cell efficiency from 2.3% to 5.4% due to improved charge separation and transport. Further increasing the molecular weight to M_n = 167 kDa however is found to produce a drop in performance to 3% due to liquid–liquid phase separation which produces coarse domains, poor charge generation, and collection. In addition to device studies, a systematic investigation of the microstructure and photophysics of this system is presented using a combination of transmission electron microscopy, grazing‐incidence wide‐angle X‐ray scattering, near‐edge X‐ray absorption fine‐structure spectroscopy, photoluminescence quenching, and transient absorption spectroscopy to provide a comprehensive understanding of the interplay between morphology, photophysics, and photovoltaic performance.     

In vivo validation of a blood vector velocity estimator with MR angiography

Conventional Doppler methods for blood velocity estimation only estimate the velocity component along the ultrasound beam direction. This implies that a Doppler angle under examination close to 90° results in unreliable information about the true blood direction and blood velocity. The novel method transverse oscillation (TO), which combines estimates of the axial and the transverse velocity components in the scan plane, makes it possible to estimate the vector velocity of the blood regardless of the Doppler angle. The present study evaluates the TO method with magnetic resonance phase contrast angiography (MRA) by comparing in vivo measurements of stroke volume. Eleven healthy volunteers were included in this prospective study. From the obtained data sets recorded with the 2 modalities, vector velocity sequences were constructed and stroke volume calculated. Angle of insonation was approximately 90° for TO measurements. The correlation between the stroke volume estimated by TO and MRA was 0.91 (p < 0.01) with the equation for the line of regression: MRA = 1.1?TO-0.4. A Bland-Altman plot was additionally constructed where the mean difference was 0.2 ml with limits of agreement at ?1.4 ml and 1.9 ml. The results indicate that reliable vector velocity estimates can be obtained in vivo using the presented angle-independent 2-D vector velocity method. The TO method can be a useful alternative to conventional Doppler systems by avoiding the angle artifact, thus giving quantitative velocity information.     

On the free vibration of sandwich panels with a transversely flexible and temperature-dependent core material – Part I: Mathematical formulation

The free vibration analysis of sandwich panels with a core that is flexible and compliant in the vertical direction and with temperature-dependent mechanical properties is presented in two parts. The first part presents the mathematical formulation while the second deals numerically with the effects of the degrading properties of the core on the free vibration response. The analysis is based on the high-order sandwich panel theory approach (HSAPT), and the equations of motions along with the appropriate boundary conditions are derived using the Hamilton’s principle. The study investigates the role of increasing temperature, through the degradation of the mechanical properties of the core, on the free vibration response of structural sandwich panels. The mathematical formulation uses two types of computational models. At first, following the HSAPT approach, the unknowns include the displacements of the face sheets as well as the shear stress in the core. Secondly, it is assumed that the through-thickness distributions of the vertical and horizontal core displacements can be represented as polynomials, following the results of the HSAPT static case, and the effect of the variable mechanical properties are implemented directly.     

Forming of bulk metallic glass microcomponents

The present article considers forward extrusion, closed-die forging and backward extrusion processes for fabrication of individual microcomponents from two bulk metallic glass (BMG) compositions: Mg₆₀Cu₃₀Y₁₀ and Zr₄₄Cu₄₀Ag₈Al₈. Two types of tooling were used in the present work: relatively massive die sets characteristic of cold forming operations for crystalline metals and lightweight die sets adapted to the special characteristics of BMGs. In addition to demonstrating that microcomponents of several geometries can be readily fabricated from BMGs, rheological properties are combined with crystallization kinetics to formulate a generally applicable method that can guide selection of optimal forming parameters. Finally, the use of particulate-based lubricants for BMG forming is shown to result in individual lubricant particles becoming mechanically locked into the BMG surface.     

Interaction of poly(methyl methacrylate) and nafions

The thermal degradation of Nafion–H, Nafion–K, and the mixture of each of these with poly(methyl methacrylate) (PMMA) has been studied. A mechanism is proposed for the thermal degradation of Nafion–H that involves an initial cleavage of the carbon–sulfur bond leading to SO₂ and OH radical and a carbon-based radical. This carbon-based radical then undergoes further degradation. The addition of PMMA to Nafion–H inhibits further degradation of the Nafion carbon-based radical and instead radical recombination reactions between PMMA fragments and this Nafion radical dominate the reaction scheme. The replacement of the hydrogen in Nafion–H with a potassium (i.e., Nafion–K) produces a much more robust material that does not degrade under conditions similar to those used for Nafion–H. Nafion–K has little effect on the degradation of PMMA.     

Perceived exertion associated with breathing hyperoxic mixtures during submaximal work

The effect of an enriched inspired oxygen concentration on perceived exertion (RPE) was investigated while running at two submaximal treadmill loads. Twelve males (VO2 max = 49.3 ml/kg-min) worked at 50% and 80% VO2 max, breathing either air or 80% O2-20% N2 in random order using a single blind technique. Subjects were evaluated while running for 10 min and during a 20 min recovery. Heart rate (HR), ventilation (VE), respiration rate (RR), tidal volume (VT) and RPE were measured before, during and after work. Blood lactate was measured 1 min after work. Oxygen concentration did not statistically affect HR, VE, RR or VT during exercise or recovery. At both loads, RPE at the end of exercise was significantly reduced breathing the hyperoxic mixture. At 50% VO2 max, mean RPE decreased from 11.2 breathing room air to 9.6 breathing 80% O2 and, 80% VO2 max, from 13.8 to 11.7 (P less than 0.01). Blood lactates were significantly reduced breathing 80% O2; from 23.4 mg to 13.3 at 50% VO2 max and from 55.5 to 36.5 at 80% VO2 max (P less than 0.01). The RPE correlated with lactate (r=0.64) at the end of work. Results indicate that during moderate and heavy work RPE is significantly affected by the inspired O2 concentration and there is a significant relationship between RPE and blood lactate.     

Effects of phenobarbital and diazepam on imipramine-induced changes in blood pressure, heart rate and rectal temperature of rats

To investigate the safety of anticonvulsants in doses found equipotent in suppressing imipramine induced convulsions, the effects of diazepam (1.8 mg/kg) or phenobarbital (40 mg/kg) following a toxic dose of imipramine (50 mg/kg) on heart rate, blood pressure and body temperature were examined in male Wistar rats. Administration of imipramine alone resulted in significant decreases in blood pressure, heart rate and rectal temperature. Phenobarbital or diazepam alone failed to significantly affect any of these parameters apart from a slight reduction in rectal temperature seen with phenobarbital. Diazepam given after imipramine antagonized the imipramine-induced decrease in heart rate but increased the hypotensive and hypothermic effects. Phenobarbital failed to significantly affect the imipramine-induced changes in any of the physiological parameters studied. The present data suggests that phenobarbital may be preferable to diazepam in treatment of imipramine-induced convulsions.     

Bronchial reactivity: interaction between vagal stimulation and inhaled histamine

The interaction between the effects of vagal stimulation and inhaled histamine on the bronchi was studied in anesthetized dogs. Reactivity was assessed by measuring changes in bronchial caliber visualized with tantalum bronchograms. In seven vagotomized dogs the bronchoconstrictor response to a combination of electrical stimulation of the vagus nerves and inhaled histamine solution produced a mean reduction in airway diameter (Daw) of 2.21 mm which was significantly greater than the additive results of the two stimuli applied separately (mean decrease in Daw 0.29 +/- 0.91 mm). In three dogs the effect of vagal stimulation was to produce a shift in the dose-response curve to inhaled histamine. These results indicate that the effect of the base-line bronchomotor tone must be considered in the evaluation of the effect of vagal blockade on airway reactivity. An increase in the resting degree of bronchomotor tone may contribute to the hyperreactivity observed in patients with asthma.