Test and evaluation of a solar powered gas turbine system

This paper describes the test and the results of a first prototype solar powered gas turbine system, installed during 2002 in the CESA-1 tower facility at Plataforma Solar de Almería (PSA) in Spain. The main goals of the project were to develop a solar receiver cluster able to provide pressurized air of 1000 °C and solve the problems arising from the coupling of the receivers with a conventional gas turbine to demonstrate the operability of the system. The test set-up consists of the heliostat field of the CESA-1 facility providing the concentrated solar power, a pressurized solar receiver cluster of three modules of 400 kWth each which convert the solar power into heat, and a modified helicopter engine (OST3) with a generator coupled to the grid. The first test phase at PSA started in December 2002 with the goal to reach a temperature level of 800 °C at the combustor air inlet by the integration of solar energy. This objective was achieved by the end of this test phase in March 2003, and the system could be operated at 230 kWe power to grid without major problems. In the second test phase from June 2003 to August 2003 the temperature level was increased to almost 1000 °C. The paper describes the system configuration, the component efficiencies and the operation experiences of the first 100 h of solar operation of this very successful first test of a solar operated Brayton gas turbine system.     

The impact of tourism on dune lakes on Fraser Island, Australia

In view of the increasing tourism to Fraser Island, Queensland, a tourist pressure index (TPI) was developed to assess the potential threat of tourism to 15 of the most accessible dune lakes on the island. Tourist pressure index scores indicated that the two clear lakes on the island, Lake McKenzie and Lake Birrabeen, are most threatened by tourist activities owing to their accessibility, facilities and prominence in advertising campaigns. In addition, limnological investigations of the same 15 lakes were conducted in February 1999 to determine their current trophic status and potential susceptibility to adverse impacts from tourism, particularly with reference to eutrophication. On the basis of nutrient and chlorophyll a concentrations, the two water table window lakes, Ocean Lake and Lake Wabby, were classed as mesotrophic and oligo‐mesotrophic, while all of the perched dune lakes were oligotrophic. Lake McKenzie and Lake Birrabeen, the two most threatened lakes according to TPI scores, had the lowest nutrient concentrations of all of the lakes examined and, consequently, we suggest that nutrient additions might elicit rapid algal growth responses in these systems. Comparisons between current data and historical data from Arthington et al. (1990 ) indicate that increases in planktonic chlorophyll a concentrations were not always directly mirrored by increases in total phosphorus concentrations. We found that while chlorophyll a concentrations were significantly higher in the 1999 samples than in the 1990 samples for all lakes, total phosphorus concentrations were higher in Ocean Lake, lower in Lake Jennings and similar in lakes McKenzie, Birrabeen and Wabby.     

Cognitive Processes in Stereotype Formation: The Role of Correct Contingency Learning for Biased Group Judgments.

Three studies investigated contingency learning and stereotype formation in a scenario about group membership and behavior with a confounding context factor. The studies tested predictions from theoretical accounts of biased group judgments in terms of simplistic reasoning, parallel distributed memory, and pseudocontingencies. Study 1 revealed a positive correlation between erroneous stereotype formation and learning of the true contingencies with the confounding factor. Study 2 showed that a focus manipulation during encoding moderated the correlation between stereotype formation and contingency learning but not the strength of the erroneous stereotype. Study 3 used a quasiexperimental comparison between participants with biased versus unbiased group judgments and extended the findings of a positive relation between stereotype formation and contingency learning. The results support an explanation of biased group judgments by pseudocontingencies; that is, unwarranted inferences from accurately perceived bivariate correlations in complex environments. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

On the complexity of drawing trees nicely: corrigendum

In this journal, Supowit and Reingold [1] have given a proof that it is NP-complete to decide whether a binary tree can be drawn on a grid with width 24 if certain æsthetic requirements are obeyed. We identify and repair a mistake in their proof.Received: 19 November 2003, Published online: 21 April 2004     

The magnetic compass mechanisms of birds and rodents are based on different physical principles.

Recently, oscillating magnetic fields in the MHz-range were introduced as a useful diagnostic tool to identify the mechanism underlying magnetoreception. The effect of very weak high-frequency fields on the orientation of migratory birds indicates that the avian magnetic compass is based on a radical pair mechanism. To analyse the nature of the magnetic compass of mammals, we tested rodents, Ansell's mole-rats, using their tendency to build their nests in the southern part of the arena as a criterion whether or not they could orient. In contrast to birds, their orientation was not disrupted when a broad-band field of 0.1-10MHz of 85nT or a 1.315MHz field of 480nT was added to the static geomagnetic field of 46000nT. Even increasing the intensity of the 1.315MHz field (Zeeman frequency in the local geomagnetic field) to 4800nT, more than a tenth of the static field, the mole-rats remained unaffected and continued to build their nests in the south. These results indicate that in contrast to that of birds, their magnetic compass does not involve radical pair processes; it seems to be based on a fundamentally different principle, which probably involves magnetite.     

Application of time-of-flight mass spectrometry with laser-based photoionization methods for time-resolved on-line analysis of mainstream cigarette smoke

The application of soft photoionization mass spectrometry methods (PIMS) for cigarette mainstream smoke analysis is demonstrated. Resonance-enhanced multiphoton ionization (REMPI) at 260 nm and vacuum ultraviolet light single-photon ionization (SPI) at 118 nm were used in combination with time-of-flight mass spectrometry (TOFMS). An optimized smoking machine with reduced memory effects of smoke components was constructed, which in combination with the REMPI/SPI-TOFMS instrument allows PIMS smoke analysis with a time resolution of up to 10 Hz. The complementary character of both PIMS methods is demonstrated. SPI allows the detection of various aliphatic and aromatic compounds in smoke up to approximately 120 m/z while REMPI is well suited for aromatic compounds. The capability of the instrument coupled to the novel sampling system for puff-by-puff resolved measurements is demonstrated. The feasibility of using the experimental system for intrapuff smoke measurements is also shown. Two main patterns of puff-by-puff behaviors are observed for different smoke constituents. The first group exhibits a constant increase in smoke constituent yield from the first to the last puff. The second group shows a high yield of the constituent in the first puff, with lower and constant or slowly increasing yields in the following puffs. A third group cannot be clearly classified and is a combination of both observed profiles.     

Inverse magnetocaloric effect in ferromagnetic Ni-Mn-Sn alloys

The magnetocaloric effect (MCE) in paramagnetic materials has been widely used for attaining very low temperatures by applying a magnetic field isothermally and removing it adiabatically. The effect can also be exploited for room-temperature refrigeration by using giant MCE materials. Here we report on an inverse situation in Ni-Mn-Sn alloys, whereby applying a magnetic field adiabatically, rather than removing it, causes the sample to cool. This has been known to occur in some intermetallic compounds, for which a moderate entropy increase can be induced when a field is applied, thus giving rise to an inverse magnetocaloric effect. However, the entropy change found for some ferromagnetic Ni-Mn-Sn alloys is just as large as that reported for giant MCE materials, but with opposite sign. The giant inverse MCE has its origin in a martensitic phase transformation that modifies the magnetic exchange interactions through the change in the lattice parameters.     

Phase contrast and DIC illumination for AFM hybrids

High-resolution optical microscopy is an essential pre-requisite for life science force microscopy, particularly for applications in cell biology and medicine. Identification and validation of cells is typically established with techniques like phase contrast microscopy or differential interference contrast microscopy. The option to select or monitor individual cells online with such light microscopy techniques while performing atomic force microscopy (AFM) measurements is therefore extremely beneficial. Here, we report two conceptually different strategies to implement these light microscopy techniques in a fully functional AFM head at the ultimate resolution of the Abbe diffraction limit.     

Ordered Mesoporous In2O3: Synthesis by Structure Replication and Application as a Methane Gas Sensor

The synthesis and characterization of ordered mesoporous In₂O₃ materials by structure replication from hexagonal mesoporous SBA‐15 silica and cubic KIT‐6 silica is presented. Variation of the synthesis parameters allows for different pore sizes and pore wall thicknesses in the products. The In₂O₃ samples turn out to be stable up to temperatures between 450 °C and 650 °C; such high thermal stability is necessary for their application as gas sensors. Test measurements show a high sensitivity to methane gas in concentrations relevant for explosion prevention. The sensitivity is shown to be correlated not only with the surface‐to‐volume ratio, but also with the nanoscopic structural properties of the materials.