Development of a gel spinning process for high‐strength poly(ethylene oxide) fibers

This article describes a new gel‐spinning process for making high‐strength poly(ethylene oxide) (PEO) fibers. The PEO gel‐spinning process was enabled through an oligomer/polymer blend in place of conventional organic solvents, and the gelation and solvent‐like properties were investigated. A 92/8 wt% poly(ethylene glycol)/PEO gel exhibited a melting temperature around 45°C and was highly stretchable at room temperature. Some salient features of a gel‐spun PEO fiber with a draw ratio of 60 are tensile strength at break = 0.66 ± 0.04 GPa, Young's modulus = 4.3 ± 0.1 GPa, and a toughness corresponding to 117 MJ/m³. These numbers are significantly higher than those previously reported. Wide‐angle x‐ray diffraction of the high‐strength fibers showed good molecular orientation along the fiber direction. The results also demonstrate the potential of further improvement of mechanical properties. POLYM. ENG. SCI., 54:2839–2847, 2014. © 2014 Society of Plastics Engineers     

Evaluation of the Interaction between Phosphohistidine Analogues and Phosphotyrosine Binding Domains

We have investigated the interaction of peptides containing phosphohistidine analogues and their homologues with the prototypical phosphotyrosine binding SH2 domain from the eukaryotic cell signalling protein Grb2 by using a combination of isothermal titration calorimetry and a fluorescence anisotropy competition assay. These investigations demonstrated that the triazole class of phosphohistidine analogues are capable of binding too, suggesting that phosphohistidine could potentially be detected by this class of proteins in vivo.     

Separation of Xenon and Krypton in the Metal–Organic Frameworks M2(m-dobdc) (M=Co,Ni)

The separation of Xe and Kr from air is challenging owing both to the very low atmospheric concentrations of these gases and the need for their distillation at cryogenic temperatures. Alternatively, separation processes based on adsorption could provide a less energy-intensive route to the isolation of these gases. Here, we demonstrate that the metal–organic frameworks M₂(m-dobdc) (M=Co, Ni; m-dobdc⁴⁻=4,6-dioxido-1,3-benzenedicarboxylate) effectively separate Xe and Kr at ambient temperatures based on the different adsorption enthalpies of each gas at the coordinatively-unsaturated M²⁺ sites in each material. In situ Xe- and Kr-dosed powder X-ray diffraction studies further reveal key differences in the binding of Xe and Kr within the materials. In particular, while both gases adsorb near the framework open metal sites at 200 K, much higher Xe occupancies are observed at these sites relative to Kr, corroborating a stronger interaction of the polarizing M²⁺ cations with Xe. Further, while krypton is only found located above the open metal sites, two additional adsorption sites are observed for xenon, correlating with the stronger adsorption of Xe over Kr in these materials. These results suggest the possible utility of employing M₂(m-dobdc) materials in the adsorptive separation of Xe and Kr.     

Effect of combining ethylene/methyl acrylate/glycidyl methacrylate terpolymer and an organoclay on the toughening of poly(lactic acid)

Blends of poly(lactic acid) (PLA) and ethylene/methyl acrylate/glycidyl methacrylate terpolymer (EMA‐GMA) with and without the addition of an organoclay were prepared by melt mixing in a twin screw extruder. Mechanical, morphological, structural, and rheological properties of the systems have been investigated as function of its compositions. The impact strength (IS) of PLA increased with the addition of EMA‐GMA. Furthermore, the addition of 2.5 wt% of organoclay to the PLA/EMA‐GMA blend promoted improvements in the mechanical properties, such as IS, tensile strength, and strain‐at‐break. Further addition of organoclay, 5 wt%, led to a formation of a double percolated network, where the clay particles form bridges across EMA‐GMA droplets and glue them together, however, without coalescence. In addition, morphological and wide‐angle X‐ray scattering analyses evidenced that the clay presents a partially exfoliated structure and that remains inside the EMA‐GMA droplets, probably as a consequence of the approach used to produce the systems. POLYM. ENG. SCI., 54:1922–1930, 2014. © 2013 Society of Plastics Engineers     

Gram-Negative Flagella Glycosylation

Protein glycosylation had been considered as an eccentricity of a few bacteria. However, through advances in analytical methods and genome sequencing, it is now established that bacteria possess both N-linked and O-linked glycosylation pathways. Both glycosylation pathways can modify multiple proteins, flagellins from Archaea and Eubacteria being one of these. Flagella O-glycosylation has been demonstrated in many polar flagellins from Gram-negative bacteria and in only the Gram-positive genera Clostridium and Listeria. Furthermore, O-glycosylation has also been demonstrated in a limited number of lateral flagellins. In this work, we revised the current advances in flagellar glycosylation from Gram-negative bacteria, focusing on the structural diversity of glycans, the O-linked pathway and the biological function of flagella glycosylation.     

CFD Process Modeling of the Industrial Calcination of Diatomite

Calcination of diatomite is an expensive process frequently resulting in products with unpredictable structure. Alternatively, calcination in swirling flow is an energy‐saving option. Computational fluid dynamics modeling of an experimental calcination process unit is presented. Experimental results and systematic collection of process data were used to define boundary condition for steady‐state and transient simulation runs. The comparison of experimental and simulation results shows the complexity of the calcination process. The results can be used for further process optimization.     

Specificity of Lipoprotein Chaperones for the Characteristic Lipidated Structural Motifs of their Cognate Lipoproteins

Lipoprotein‐binding chaperones mediate intracellular transport of lipidated proteins and determine their proper localisation and functioning. Understanding of the exact structural parameters that determine recognition and transport by different chaperones is of major interest. We have synthesised several lipid‐modified peptides, representative of different lipoprotein classes, and have investigated their binding to the relevant chaperones PDEδ, UNC119a, UNC119b, and galectins‐1 and ‐3. Our results demonstrate that PDEδ recognises S‐isoprenylated C‐terminal peptidic structures but not N‐myristoylated peptides. In contrast, UNC119 proteins bind only mono‐N‐myristoylated, but do not recognise doubly lipidated and S‐isoprenylated peptides at the C terminus. For galectins‐1 and ‐3, neither binding to N‐acylated, nor to C‐terminally prenylated peptides could be determined. These results shed light on the specificity of the chaperone‐mediated cellular lipoprotein transport systems.     

Preparation and characterization of EVA/clay Nanocomposites with improved barrier performance

Poly (ethylene‐co‐vinyl acetate) (EVA)/clay nanocomposites containing two different organoclays with different clay loadings were prepared. The transport of gases (oxygen and nitrogen) through the composite membranes was investigated and the results were compared. These studies revealed that the incorporation of nanoclays in the polymer increased the efficiency of the membranes toward barrier properties. It was also found that the barrier properties of the membranes decreased with clay loadings. This is mainly due to the aggregation of clay at higher loadings. The morphology of the nanocomposites was studied by scanning electron microscopy, transmission electron microscopy and X‐ray scattering. Small angle X‐ray scattering results showed significant intercalation of the polymer chains between the organo‐modified silicate layers in all cases. Better dispersed silicate layer stacking and more homogeneous membranes were obtained for Cloisite® 25A based nanocomposites compared with Cloisite® 20A samples. Microscopic observations (SEM and TEM) were coherent with those results. The dispersion of clay platelets seemed to be maximized for 3 wt % of clay and agglomeration increased with higher clay loading. Wide angle X‐ray scattering results showed no significant modifications in the crystalline structure of the EVA matrix because of the presence of the clays. The effect of free volume on the transport behavior was studied using positron annihilation spectroscopy. The permeability results have been correlated with various permeation models. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012