Huge increase of therapeutic window at a bioactive silver/titania nanocomposite coating surface compared to solution

A silver containing coating used in the human body, e.g., on an implant should be both effectively antimicrobial and non-cytotoxic to human cells. It is generally believed that the biologic effect originates from silver ions released from the coating. Nanocomposites with well controlled Ag filling factor were prepared by co-sputtering, and the silver surface concentration and the silver release were determined by XPS and ICP-MS, respectively. Here we show that only a small therapeutic window exists for dissolved silver but the therapeutic window is largely increased at the surface. While the toxicity observed for mammalian cells in contact with the bioactive Ag/TiO₂ nanocomposite surface and for silver ions in solution is rather similar the antimicrobial activity is drastically enhanced at the surface. A model is proposed to explain the strong increase of the antimicrobial activity at the surface. The present results not only question well-established tests for antimicrobial activity but they are also important for the design of antimicrobial coatings, e.g., for biomedical devices.     

A new approach to solve the k-server problem based on network flows and flow cost reduction

This paper is concerned with two algorithms for solving the k-server problem: the optimal off-line algorithm (OPT) and the on-line work function algorithm (WFA). Both algorithms are usually implemented by network flow techniques including the flow augmentation method. In the paper a new implementation approach is proposed, which is again based on network flows, but uses simpler networks and the cost reduction method. The paper describes in detail the corresponding new implementations of OPT and WFA, respectively. All necessary correctness proofs are given. Also, experiments are presented, which confirm that the new approach assures faster execution of both algorithms.     

Novel direct optimal and indirect method for discretization of linear fractional systems

This paper addresses the problem of discretization of fractional differintegrators and fractional systems in general. Two new discretization schemes are proposed—optimal direct method, and computationally inexpensive indirect method. The proposed methods are highly flexible and suitable for obtaining both general purpose and specialized, application-specific approximations. Both proposed methods outperform recently proposed approximations, as it is shown in several illustrative examples.     

Evolutionary algorithm with fuzzy numbers for planning active distribution network

Modern approach to distribution systems planning requires developing tools able to interpret and analyze the stochastic nature of large power system problems. At the same time, it has to be able to optimize multiple, conflicting goals that appear in today’s open market environment. The presented evolutionary algorithm is based on a Multiple Vehicle Routing Problem adjusted for solving active electric distribution networks. An original approach to fuzzy number modeling is used for active power sources, consumption substations and distributed generation. This model, besides shorter computational time and less memory usage, is applicable to any form of fuzzy number shape required by the planner in modeling the stochastic nature of elements. An idea of defuzzification using pessimism is presented and compared to the solutions obtained without pessimism included. Application of the original universal fuzzy number modeling, using FER-fuzzy modeling, is demonstrated on multi-objective evolutionary algorithm and applied to real Croatian distribution network.     

Modeling thermal effects in nano-devices

For the purpose of investigating the role of self-heating effects on the electrical characteristics of nano-scale devices, we implemented a two-dimensional Monte Carlo device simulator that self-consistently includes the solution of the energy balance equations for both, acoustic and optical phonons. We find less degradation in the current in smaller device structures because of the more pronounced velocity overshoot.     

Cow colostrum and early milk enriched with eicosapentaenoic and docosahexaenoic fatty acid

The objective of the study was to explore whether it is possible to alter cow colostrum and early milk fatty acid composition with a low level of fat supplement, high in docosahexaenoic (DHA) and eicosapentaenoic (EPA) fatty acid. Diets included a control diet and a diet supplemented with DHA- and EPA-enriched fat supplement. Addition of fat supplement significantly decreased saturated fatty acids, C14:0 and C16:0 and increased the values of monounsaturated fatty acids, polyunsaturated fatty acids (PUFA), n3 fatty acids, EPA, DHA, C18:1n9cis and C18:1n11trans. The percentage of short-chain fatty acids significantly increased with the progress of lactation, while the percentage of PUFA, n3 and n6 significantly decreased. These results showed that fat supplement, high in DHA and EPA, modified the fatty acid profile of colostrum and milk fat and increased the proportion of beneficial fatty acids for human health.     

Bioactivity and metabolism of trans-resveratrol orally administered to Wistar rats

The purpose of this study was to investigate the implications of selected chemopreventive parameters and metabolic conversion of resveratrol in vivo. In two 8-week long feeding experiments with rats, a low-resveratrol diet containing 50 mg resveratrol per kg body weight (bw) and day and a high-resveratrol diet with 300 mg per kg bw and day were administered. For chemopreventive evaluation selected phase I and phase II enzymes of the biotransformation system, the total antioxidant activity, and the vitamin E status of the animals were determined. The level of resveratrol and its metabolites in the feces, urine, plasma, liver, and kidneys was identified and quantitated by high-performance liquid chromatography-diode array detection (HPLC-DAD) using synthesized resveratrol conjugate standards. Feeding of different dosages of resveratrol revealed no effect on the different chemopreventive parameters, except for the total antioxidant activity, which was elevated in plasma by 19% after feeding 50 mg resveratrol per kg bw and day. The formation of trans-resveratrol-3-sulfate, trans-resveratrol-4'-sulfate, trans-resveratrol-3,5-disulfate, trans-resveratrol-3,4'-disulfate, trans-resveratrol-3,4',5-trisulfate, trans-resveratrol-3-O-beta-D-glucuronide, and resveratrol aglycone was detected by HPLC analysis, depending on the biological material. Total resveratrol recovery in urine and feces of rats fed on 50 mg resveratrol per kg bw and day was 15% and 13%, respectively. For rats fed the higher dosage of 300 mg resveratrol per kg bw and day recovery was 54% and 17%, respectively. This is the first study performed with synthesized standards of relevant resveratrol conjugates. The lack of effect on the chemopreventive parameters is probably due to the formation of various resveratrol conjugates reducing its bioavailability in the rat.     

Influence of Whey Protein Addition and Feed Moisture Content on Chosen Physicochemical Properties of Directly Expanded Corn Extrudates

Production of extrudates from cereals is an often-used technological process in today’s world food industry. Extrudates from corn flour produced using the twin-screw extrusion process and enriched with whey protein concentrate represent high-quality source of proteins and fats. Whey protein concentrate (WPC) as a valuable source of proteins and minerals is one of the highest-quality components for possible extrudate enrichment. In this paper, the influence of various WPC addition and some extrusion process parameters such as feed moisture content ( Q_{textHtext2 textO} Q_{{{text{H}}_{text{2}} {text{O}}}} ) on physicochemical properties of directly expanded corn flour extrudates manufactured in twin-screw co-rotating extruder was investigated. Whey protein concentrate was added in the following ratios 7.5%, 15% and 22.5% and water in 10.08, 12.18 and 14.28 L/h. Final composition of products is determined with measuring of protein, fat and water shares, water absorption index (WAI) and water solubility index (WSI). With added WPC and with increase of water volume flow, there was a significant rise in total protein, fat and water content in final products, as well as lowering of WSI and rising of WAI indexes. The statistical analysis of the obtained data shows that the lowest WSI and the highest WAI had samples with the largest share of WPC (22.5%) and water volume flow of 14.28 L/h. Colour is measured for each sample, and results were represented with hue angle (H), chroma (C) and lightness (L) values. Process parameters, WPC and Q_{textHtext2 textO} Q_{{{text{H}}_{text{2}} {text{O}}}} influence the increase of saturation of C and lightness of L colour value, while H value stays unchanged. Mean value of H was 90.14 ± 1.06, which corresponds to dominance of yellow colour of samples.