Relation between crystal structure and lattice oxygen content of sintered reaction-bonded silicon nitride

When reaction-bonded silicon nitride containing MgO/Y₂O₃ additives is sintered at three different temperatures to form sintered reaction-bonded silicon nitride (SRBSN), the thermal conductivity increases with sintering temperature. The β-Si₃N₄ (silicon nitride) crystals of SRBSN ceramics were synthesized and characterized to investigate the relation between the crystal structure and the lattice oxygen content. The hot-gas extraction measurement result and the crystal structure obtained using Rietveld analysis suggested that the unit cell size of the β-Si₃N₄ crystal increases with the decrease in the lattice oxygen content. This result is reasonable considering that the lattice oxygen with the smaller covalent radius substitutes nitrogen with the larger one in the β-Si₃N₄ crystals. The lattice oxygen content decreased with increasing sintering temperature which also correlated with increase in thermal conductivity. Moreover, it is noteworthy from the viewpoint that it may be possible to apply the lattice constant analysis for the nondestructive and simple measurement of the lattice oxygen content that deteriorates the thermal conductivity of the β-Si₃N₄ ceramics.     

Re-evaluation of Radiation-Energy Transfer to an Extraction Solvent in a Minor-Actinide-Separation Process Based on Consideration of Radiation Permeability

ABSTRACT

Absorbed-dose estimation is essential for evaluation of the radiation tolerance of minor-actinide-separation processes. We propose a dose-evaluation method based on radiation permeability, with comparisons of heterogeneous structures seen in the solvent-extraction process, such as emulsions forming in the mixture of the organic and aqueous phases. A demonstration of radiation-energy-transfer simulation is performed with a focus on the minor-actinide-recovery process from high-level liquid waste with the aid of the Monte Carlo radiation-transport code PHITS. The simulation results indicate that the dose absorbed by the extraction solvent from alpha radiation depends upon the emulsion structure, and that from beta and gamma radiation depends upon the mixer-settler-apparatus size. Non-negligible contributions of well-permeable gamma rays were indicated in terms of the plant operation of the minor-actinide-separation process.     

Ultrasonic irradiation on hydrolysis of magnesium hydride to enhance hydrogen generation

This paper describes the ultrasonic irradiation on the hydrolysis of magnesium hydride to enhance hydrogen generation; the effects of the ultrasonic frequency and the sample size on the hydrogen generation were mainly examined. In the experiments, three MgH₂ particle and nanofiber samples were soaked in distilled water and ultrasonically irradiated at frequencies of 28, 45, and 100 kHz. Then, the amount of hydrogen generated was measured. We found that the low frequency of ultrasonic irradiation and the relatively small sample size accelerated the hydrolysis reaction MgH₂ + 2H₂O = Mg(OH)₂ + 2H₂ + 277 kJ. In particular, the MgH₂ nanofibers exhibited the maximum hydrogen storage capacity of 14.4 mass% at room temperature at a frequency of 28 kHz (ultrasound irradiation). The results also experimentally validated that a combination of ultrasonic irradiation and MgH₂ hydrolysis is considerably effective for efficiently generating hydrogen without heating and adding any agent.     

NUMERICAL STUDY ON TURBULENT FLOW AND HEAT TRANSFER IN CIRCULAR COUETTE FLOWS

Abstract

A numerical study is performed to investigate heat transfer and fluid flow in the entrance and fully developed regions of an annulus, consisting of a rotating, insulated inner cylinder and a stationary, heated outer cylinder. Several different k-ε turbulence models are employed to determine the turbulent kinetic energy, its dissipation rate, and the heat transfer performance. The governing boundary layer equations are discretized by means of a control volume finite difference technique and numerically solved using the marching procedure. In the entrance region the axial rotation of the inner cylinder induces a thermal development and causes an increase in both the Nusselt number and the turbulent kinetic energy in the inner cylinder wall region. In the fully developed region, an increase in the Taylor number causes an amplification of the turbulent kinetic energy over the whole cross section, resulting in a substantial enhancement in the Nusselt number. These transport phenomena are also affected by the radius ratio and Reynolds number.     

Molecular Thermal Phenomena in an Ultrathin Lubrication Liquid Film of Linear Molecules Between Solid Surfaces

Molecular dynamics simulation has been performed on an ultra-thin lubrication liquid film, where the liquid film of diatomic molecules having a thickness of molecular scale (several nanometers) is sheared by two parallel solid walls moving at different speeds. The Couette-like flow is generated and energy conversion from the macroscopic flow energy to thermal energy, which is the viscous heating in a macroscopic sense, occurs in the liquid film. It was observed in the present simulations that the thermal phenomena in the liquid film are far from the macroscopically expected ones; thermal energy is not distributed evenly to each degree of freedom of molecular motion, and energy transfer in the liquid adjacent to the solid surface is contributed by molecular motion in a manner different from those in a bulk liquid.     

Decision-making in electrical appliance use in the home

This paper presents the results of a survey as well as an argument from the viewpoint of behavioral economics with the aim of clarifying how consumers make decisions about electrical appliance use in the home. A survey of consumers showed that most have little awareness of the energy efficiency of appliances, the price of the services produced by electrical appliances, or electricity rates. These findings indicate that price does not function as a signal in electricity consumption through electrical appliance use. Rather, we found that consumer decision-making in electricity consumption is dependent on the characteristics of the particular electrical appliances they use. Additionally, we argue that the payment system for home electricity consumption plays an important role in decision-making, causing biases due to aspects of human psychology discussed here in terms of satisficing and heuristics, payment decoupling, and budgeting. We conclude that decision-making about electrical appliance use and electricity consumption in the home is not always rational and is affected both by the particular characteristics of appliances and the payment system for electricity consumption along with human psychology.     

Ferroelectric properties of ultrathin films of Nylon 11

Ferroelectric properties of ultrathin films of Nylon 11 were investigated. The thickness was in the range of 25 to 55 nm. Ferroelectric response was largely affected by thermal annealing and following cooling conditions. Thermal annealing at higher temperature followed by quenching in liquid nitrogen gave larger remanent polarization and smoother surface, whereas cooling down in an ambient atmosphere caused smaller remanent polarization and rough surface. Surface roughness strongly affected the polarization reversal and remanent polarization. Hydrogen bonding in crystal was also significantly related to the polarization reversal and thus remanent polarization.     

Development of numerical scheme for phase field crystal deformation simulation

The phase field crystal (PFC) method is anticipated as a new multiscale method, because this method can reproduce physical phenomena depending on atomic structures in metallic materials on the diffusion time scale. Although the PFC method has been applied to some phenomena, there are few studies related to evaluations of mechanical behaviors of materials by appropriate PFC simulation. In a previous work using the PFC method, tensile deformation simulations have been performed under conditions where the volume increases during plastic deformation. In this study, we developed a new numerical technique for PFC deformation simulation that can maintain a constant volume during plastic deformation. To confirm that the PFC model with the proposed technique can reproduce appropriate elastic and plastic deformations, we performed a series of deformation simulations in one and two-dimensions. In one- and two-dimensional single-crystal simulations, linear elastic responses were confirmed in a wide strain rate range. In bicrystal simulations, we could observe typical plastic deformations due to the generation, annihilation and movement of dislocations, and the interaction between the grain boundary and dislocations. Moreover, the deformation behaviors of a nanopolycrystalline structure at high temperature were simulated and the intergranular deformations caused by grain rotation and grain boundary migration were reproduced.     

Group feature extraction based on matrix factorization from long-range office-logging data

To increase the productivity of knowledge workers, it is necessary to manage their organization so that they are motivated to collaborate with each other for their synergy. However, it is difficult for managers to grasp the explicit interactions of workers in the organization all the time. Owing to advanced communications technology, and the reduced size and improved capabilities of computers, we are able to record group behaviors as logging data in the office. The aim of this study is to extract features of group behavior from long-range office-logging data. We apply principal component analysis to the data matrix whose element is the mean travel velocity calculated from an individual’s trajectory per day. The results demonstrate the feasibility of our approach, since nontrivial informative group features can be extracted.