In-Flight Nitridation of Molybdenum Disilicide Powders by an Induction Plasma

The in-flight nitridation of MoSi₂ powder particles was attempted in an argon-nitrogen induction plasma, with and without tail gas quenching. The inductive power level, reactor pressure, plasma-gas composition, and quantity of quench gas, as well as the species of quench gas, were investigated to obtain substantial nitridation of the MoSi₂ powder particles. Under investigated conditions, ∼2.8 wt% of nitrogen was incorporated into the MoSi₂ powder particles.     

A quantum chemical study on the polycondensation reaction of polyesters: The mechanism of catalysis in the polycondensation reaction

We carried out a theoretical study on the mechanism of catalysis in the poly(ethylene terephthalate) (PET) polycondensation reaction. Transesterification reaction of diethylterephthalate with ethanol is investigated as a model system by using the B3LYP level of theory, and Sb(OEt)₃, Ge(OEt)₄ and Ti(OEt)₄ are adopted as model catalysts. We found that the metal center of metal alkoxides coordinates to the carbonyl oxygen atom of the ester, and the alkoxy oxygen atom of alkoxy ligands attacks to the carbonyl carbon atom of the ester to form the four-centered transition state. The activation energy for tetraethoxy titanium catalyzed reaction in vacuo is 15.47 kcal/mol; this is comparable to the experimental result of 11.2 kcal/mol for poly(butylene terephthalate)/Ti(OBu)₄. Because the other mechanisms gave much higher activation energies, this is the most convincing mechanism of PET polycondensation catalysis by antimony, germanium and titanium alkoxides.     

Study of shunt type SFCL equipped with electromagnetic repulsion switch for large capacity

Using a high‐temperature superconductor, we constructed and tested a model Superconducting Fault Current Limiter (SFCL). The SFCL that we proposed has a vacuum interrupter with electromagnetic repulsion mechanism. We set out to construct a high‐voltage‐class SFCL. We produced an electromagnetic repulsion switch equipped with a 24‐kV vacuum interrupter (VI). However, the opening speed becomes slower, because the larger vacuum interrupter needs a heavier‐weight contact. For this reason, the current which flows in a superconductor may not be interruptible within a half cycle of current. In order to solve this problem, it is necessary to change the design of the coil connected in parallel and to strengthen the electromagnetic repulsion force at the time of opening the vacuum interrupter. Thus, the design of the coil was changed, and in order to examine whether the problem is solvable, a current limiting test was conducted. We carried out a current limiting test using second‐generation (2G) HTS wire. The element used in this experiment has a stainless steel stabilizer on both sides of the wire. In the experiment we succeeded in interrupting the current of a superconductor within a half cycle. © 2010 Wiley Periodicals, Inc. Electr Eng Jpn, 173(4): 20–27, 2010; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.21039     

Development of a high‐definition 32‐in. PDP

We developed the world's smallest‐profile 32‐in. HDTV PDP. By improving the luminous efficiency, a luminance of 650 cd/m² and power consumption (discharge and driving circuit) of 200 W or less was achieved. Moreover, incorporating an advanced color compensating (ACC) filter improved the PDP's color‐reproduction capability, better than that of CRTs.     

Combined study with FDG PET and Tl SPECT in patients with idiopathic dilated cardiomyopathy

This study aimed to determine whether combined examinations of myocardial 2-[18F]fluoro-2-deoxy-D-glucose positron emission tomography (FDG PET) and stress-redistribution 201Tl single-photon emission computed tomography (Tl SPECT) were useful in clarifying myocardial ischaemia and evaluating the prognosis in patients with idiopathic dilated cardiomyopathy (IDCM). Twenty-two patients with IDCM underwent echocardiography, cardiac catheterization, FDG PET, and Tl SPECT. In scintigraphic analysis, the total defect score (TDS) was semiquantitatively determined as the sum of scores of the 17 left ventricular (LV) segments with a 5-point scale (0 as normal to 4 as absent). Patients were classified according to the scintigraphic findings as follows: eight patients with small defects on Tl and FDG (TDS < or = 20) (group I), eight patients with small defects on FDG (TDS < or = 20) with FDG uptake increased relative to Tl or 'mismatch' (group II), and six patients with large defects on FDG and Tl (TDS >20) (group III). Eleven patients (50%) showed reversible defects on Tl and all showed preserved FDG uptake. The patients in group III had significantly lower LV ejection fraction (LVEF) (P<0.05, respectively) and a poorer prognosis as shown by the Kaplan-Meier event-free curve compared with those in groups I and II (P<0.01, respectively). Although patients in group II had significantly greater TDS on Tl compared with those in group I (P<0.01), no significant differences in LVEF and prognosis were found between patients in groups I and II. In multivariate analysis, a TDS on FDG revealed an independent predictor of subsequent cardiac events. In conclusion, such mismatched areas can be assumed to consist of impaired but viable myocardium, and may be associated with ischaemia of the microvasculature. Impaired myocardial glucose metabolism is a more powerful predictor of future cardiac events than perfusion abnormality in patients with IDCM.     

Radiation grafting of α,β,β-trifluorostyrene onto poly(ethylene–tetrafluoroethylene) film by preirradiation method. I. Effects of preirradiation dose,monomer concentration,reaction temperature,and film thickness

Preirradiation grafting of α,β,β-trifluorostyrene onto poly(ethylene–tetrafluoroethylene) film was studied. The trapped radicals formed upon irradiation were able to induce graft polymerization under appropriate conditions. The influences of the grafting conditions were analyzed kinetically. The grafting rate dependency on the preirradiation dose was found to be of order 0.3, and the monomer concentrations, 1.0. The overall activation energies for this grafting were calculated to be 6.2 × 10⁴ and 9.3 × 10³ J/mol below and above 50°C. The grafting rate was found to be independent of the film thickness, which ranged from 25 to 100 μm.     

Mesh-connected parallel computer PAX for scientific applications

Nearest-neighbor-mesh connection plus global broadcasting/control bus characterizes the architecture of the processor array PAX, that was constructed for and is now operating in many typical scientific applications. Not only these inter-processor connections, but also an MIMD structure of the machine were found effective in the particle transport problems, that require asynchronous operation.

The paper describes the bases of architecture of two recent versions of the PAX computer, their hardware and software systems, and, based on the implementation of scientific applications, the effectiveness of the PAX type architecture is presented.     

Thermoplastic elastomer by radiation grafting. I. Evaluation of processability of natural rubber grafted methyl methacrylate

Processability of thermoplastic elastomer (TPE) prepared by radiation-induced grafting of methyl methacrylate (MMA) onto radiation vulcanized natural rubber latex (RVNRL) has been evaluated using a kneader and a hot roll mill at 150°C. It was found that mixing time and revolution rate (rpm) of the kneader have significantly affected the processability. The longer mixing time and the higher revolution rate result in better processability. In such processing conditions, however, the mechanical properties were found to be inferior because the molecular chain scissions occurred during the mixing. A considerable improvement of mechanical properties was obtained when the mixing was carried out without added process oils. Blends of the grafted vulcanized natural rubber latex (RVNRL-g-PMMA) and MMA grafted on unvulcanized natural rubber latex (NRL-g-PMMA) improved processability where the better processability could be achieved at a shorter mixing time and a lower revolution rate. In addition, a comparable value of mechanical properties was obtained.