Effects of Particle Size of Bulk Drug and food on the Bioavailability of U-78875 in Dogs

The effects of particle size and food on the absolute bioavailability of U-78875 in dogs after oral administration of either a suspension or tablet dosage form were investigated. A reduction of particle size caused a significant increase in bioavailability along with an increase in dissolution rate. Additionally, both suspension and tablet dosage forms administered after food caused an increase in bioavailability. Thus, to accelerate drug dissolution, a reduction of U-78875 particle size from the unmilled state is important for the optimization of formulation compositions. To increase the bioavailability of U-78875, postprandial dosing should be considered.     

Synthesis of thermosetting poly(phenylene ether) containing allyl groups

New thermosetting poly(2-allyl-6-methylphenol-co-2,6-dimethylphenol)s (3) have been developed by oxidative coupling copolymerization of 2-allyl-6-methylphenol (1) with 2,6-dimethylphenol (2), followed by thermal curing. Copolymerization was conducted in nitrobenzene in the presence of copper(I) chloride and pyridine as the catalyst under a stream of oxygen, producing high molecular weight copolymers (M_n∼50,000) with broad molecular weight distributions (M_w/M_n∼35). The structure of resulting copolymers 3 was characterized by IR, ¹H, and ¹³C NMR spectroscopy. Cross-linking reactions of copolymers were carried out by thermal treatment in the absence or presence of a peroxide (3 wt%, 2,5-dimethyl-2,5-di(tert-butylperoxy)-3-butane). The 10% weight loss and glass transition temperatures of the cured copolymers were 436 °C in nitrogen and 235 °C, respectively after curing at 70 °C for 1 h and 300 °C for 1 h. The average refractive index of the cured copolymer (3b) film was 1.5407, from which the dielectric constant (ε) at 1 MHz was estimated as 2.6. The ε and dissipation factor of copolymer-films at 1 MHz were directly measured from their capacitances as 2.5-2.6 and 0.0015-0.0019, respectively.     

A content search system considering the activity and context of a mobile user

People routinely carry mobile devices in their daily lives and obtain a variety of information from the Internet in many different situations. In searching for information (content) with a mobile device, a user’s activity (e.g., moving or stationary) and context (e.g., commuting in the morning or going downtown in the evening) often change, and such changes can affect the user’s degree of concentration on his or her mobile device’s display and information needs. Therefore, a search system should provide the user with an amount of information suitable for the current activity and a type of information suitable for the current context. In this study, we present the design and implementation of a content search system that considers a mobile user’s activity and context, with the goal of reducing the user’s operation load for content search. The proposed system switches between two kinds of content search systems according to the user’s activity: the location-based content search system is activated when the user is stationary (e.g., standing and sitting), while a menu-based content search system is activated when the user is moving (e.g., walking). Both systems present information according to user context. The location-based system presents detailed information via menus and a map according to location-based categories. The menu-based system presents only a few options to enable users to get content easily. Through user experiments, we confirmed that participants could get desired information more easily with this system than with a commercial search system.     

Using selective precipitant for uranyl ions — Fundamental studies for evaluating the precipitant performance

We have developed a simple reprocessing process for spent FBR fuels using N-cyclohexyl-2-pyrrolidone (NCP) which has selective precipitation ability for UO₂²⁺ ions. It was confirmed that NCP has sufficient precipitation ability for UO₂²⁺ ions, decontamination capability (separation of UO₂²⁺ from simulated fission products), and resistance to γ-ray radiation in nitric acid solutions. These findings indicate that NCP is applicable to our reprocessing process. We have also evaluated performances of other precipitants such as N-n-propyl-2-pyrrolidone (NProP), N-n-butyl-2-pyrrolidone (NBP), and N-n-butyl-2-pyridone (NBPyr). It was found that higher decontamination factors (DFs) are obtained by using NProP and NBP. This can be interpreted that the hydrophobicity of NProP and NBP is lower than that of NCP. Furthermore, we have obtained an experimental result that the resistance of NBPyr to γ-ray radiation is superior to that of NCP.     

A novel chromatographic separation technique using tertiary pyridine resin for the partitioning of trivalent actinides and lanthanides

A novel chromatographic separation technique using a tertiary pyridine type resin has been applied to the partitioning of the trivalent actinides (An) and lanthanides (Ln) and several successful results have been shown. In an alcoholic hydrochloric acid system, the trivalent An were clearly separated from the Ln, while no such group separation was achieved in an alcoholic nitric acid system. On the other hand, the nitric acid system was more effective for the intragroup (i.e. individual) separation of the trivalent An and the Ln than the hydrochloric acid system. On the basis of these results, a novel concept for the partitioning of the trivalent An and Ln using the present separation technique and its flowchart have been proposed with its advantages and disadvantages.     

Variations of stress intensity factor of a semi-elliptical surface crack subjected to mixed mode loading

Maximum stress intensity factors of a surface crack usually appear at the deepest point of the crack, or a certain point along crack front near the free surface depending on the aspect ratio of the crack. However, generally it has been difficult to obtain smooth distributions of stress intensity factors along the crack front accurately due to the effect of corner point singularity. It is known that the stress singularity at a corner point where the front of 3 D cracks intersect free surface is depend on Poisson's ratio and different from the one of ordinary crack. In this paper, a singular integral equation method is applied to calculate the stress intensity factor along crack front of a 3-D semi-elliptical surface crack in a semi-infinite body under mixed mode loading. The body force method is used to formulate the problem as a system of singular integral equations with singularities of the form r ⁻³ using the stress field induced by a force doublet in a semi-infinite body as fundamental solution. In the numerical calculation, unknown body force densities are approximated by using fundamental density functions and polynomials. The results show that the present method yields smooth variations of mixed modes stress intensity factors along the crack front accurately. Distributions of stress intensity factors are indicated in tables and figures with varying the elliptical shape and Poisson's ratio.     

A single solution method for converting 2D assembly drawings to 3D part drawings

Although solid models play a central role in modern CAD systems, 2D CAD systems are still commonly used for designing products without complex curved faces. Therefore, an important task is to convert 2D drawings to solid models, and this is usually carried out manually even in present CAD systems. Many methods have been proposed to automatically convert orthographic part drawings of solid objects to solid models. Unfortunately, products are usually drawn as 2D assembly drawings, and therefore, these methods cannot be applied. A further problem is the difficult and time-consuming task of decomposing 2D assembly drawings into 2D part drawings. In previous work, the authors proposed a method to automatically decompose 2D assembly drawings into 3D part drawings, from which 2D part drawings can be easily generated. However, one problem with the proposed method was that the number of solutions could easily explode if the 2D assembly drawings became complex. Building on this work, here we describe a new method to automatically convert 2D assembly drawings to 3D part drawings, generating a unique solution for designers regardless of the complexity of the original 2D assembly drawings. The only requirement for the approach is that the assembly drawings consist of standard parts such as bars and plates. In 2D assembly drawings, the dimensions, part numbers and parts lists are usually drawn, and the proposed method utilizes these to obtain a unique solution.     

Experimental and numerical investigation of effects of particle shape and size distribution on particles’ dispersion in a coaxial jet flow

In this study, an experimental and a numerical investigations are performed to investigate the effect of particle’s shape and size distribution on its dispersion behavior. Firstly, particle dispersion of pulverized coal and spherical polymer particles is observed by Particle Image Velocimetry (PIV) technique in the experiment. Secondly, a simulation is performed to analyze the particle dispersion in detail. Spherical and spheroidal motion models are applied to particle’s movement to investigate the shape effect. Furthermore, monodisperse and polydisperse for particles are applied to investigate the size distribution effect on the dispersion. Experimental results show that in the jet turbulence flow, pulverized coal particles, which have complex shapes and various sizes, have quite different dispersion behavior compared to spherical particles. In terms of the results of the simulation, this difference is mainly caused by the size distribution effect. Although particle’s shape affects the dispersity, it is weakened by the size distribution effect.     

PVC、EPR和CSM材料辐照后热氧化降解的反应动力学分析

采用气相色谱定量测量了聚氯乙烯(PVC)、乙丙橡胶(EPR)和氯磺化聚乙烯(CSM)等线缆绝缘材料经辐照后在不同温度下热老化过程中的O2消耗量.对实验数据进行了反应动力学分析,发现线缆绝缘材料的热氧化降解反应为一级反应.同时获得了不同温度下的反应常数,并与根据Arrhenius 方程计算的理论结果进行了比较.     

Crystalline Sodium Selenocarboxylates – synthesis and characterization

A series of sodium selenocarboxylates 2 were isolated from the reaction of diacyl selenides with sodium ethanolate and characterized. A convenient preparation of the sodium salts 2 by the direct reaction of acyl chlorides with sodium selenide was also established. The salts are colourless to slightly pale yellow crystals and labile towards moisture. They readily react with alkyl iodides at room temperature to give the corresponding Se-alkyl esters 3 .