Measurement of the isotopic abundance of boron-10 by inductively coupled plasma-quadrupole mass spectrometry

This article describes the method for measuring the isotopic abundance of ¹⁰B in nuclear grade boron carbide using inductively coupled plasma-quadrupole mass spectrometry (ICP-QMS). The results of investigation revealed that both the integration time and the dwell time have a major influence on the reproducibility of ICP-QMS measurements. As a result of optimization of the measurement conditions, reproducibility below 0.2% relative standard deviation (RSD) (0.17% RSD maximum) was achieved. In addition, the measured value of the isotopic abundance of ¹⁰B for each sample well agreed with the values measured by the TIMS. Thus, the method described in the present investigation was very effective in the analysis of isotopic abundance of ¹⁰B in B₄C or H₃BO₃. The results of this study suggest that ICP-QMS could be applied to the precise analysis of the isotopic abundance of ¹⁰B required in the field of nuclear applications.     

Simultaneous Measurements of an Ultrasound and a Torsional Oscillator for 4He in a Nanoporous Glass

Previously, we carried out ultrasonic measurements for liquid ⁴He filled in a nanoporous glass (Gelsil), and observed an increase in the sound velocity due to decoupling of the superfluid component. At zero pressure, the superfluid transition temperature T _C is suppressed to 1.4 K from the bulk lambda point, 2.17 K. This behavior is the same as torsional oscillator measurements by Yamamoto et al. (Phys. Rev. Lett. 93:075302, 2004). However, the pressure dependence of T _C and the temperature dependence of the superfluid fraction are very different from the torsional oscillator measurements. In order to clarify the origin of the difference, we have developed a new technique of simultaneous measurement of an ultrasound and a torsional oscillator, and the system successfully works for a nanoporous glass. Here, we compare decoupling of the superfluid component for ⁴He films between an ultrasound and a torsional oscillator.     

Radiation-induced polymerization of ethylene in pilot plant. III. Heavy-phase recycling process

Radiation-induced polymerization of ethylene using aqueous tert-butyl alcohol as medium was carried out in a large-scale pilot plant with a 50-liter central source-type reactor at a pressure of 105 to 395 kg/cm², temperature of 30° to 80°C, mean dose rate of 4.5 × 10⁴ to 1.9 × 10⁵ rads/hr, ethylene feed rate of 5.5 to 23.5 kg/hr, and medium feed rate of 21 to 102 l./hr. The space–time yield and molecular weight of the polymer were in the range of 4.7 to 16.8 g/l.-hr and 1.3 × 10⁴ to 8.9 × 10⁴, respectively. The space–time yield and molecular weight increased with mean residence time at 30°C, whereas at 80°C they became almost independent of the time. The space–time yield increased with pressure and dose rate, slightly decreased with temperature, and was maximum at ethylene molar fraction of 0.5. The polymer molecular weight increased with pressure and ethylene molar fraction, and decreased with dose rate and temperature. The total amount of deposited polymer on the reactor wall, source case wall, and scraping blades was usually less than 1 kg, which was negligibly small for the analysis of polymerization. Continuous discharge of the polymer slurry and production of fine-powder polyethylene were successfully carried out. In the central source-type reactor, a dose rate of 1.9 × 10⁵ rads/hr was obtained with a ⁶⁰Co source of ca. 12 kCi.     

Preparation method for supported metal catalysts using w/o microemulsion: Study on immobilization conditions of metal particles by hydrolysis of alkoxide

It was previously found that the silica-supported rhodium catalyst prepared using water-in-oil microemulsion had rhodium particles partly, or wholly, embedded in silica. In this work, consequently, we investigated the effect of hydrolysis conditions of tetraethylorthosilicate, employed as the source of silica, on the atomic ratio of surface rhodium in contact with the gas phase, to total surface rhodium of nanoparticles. This ratio is denoted as R in this paper. R became higher when the catalyst was prepared under the following hydrolysis conditions: a shorter hydrolysis time and a smaller amount of tetraethylorthosilicate. On the other hand, R showed the minimum value when the water content in the preparation solution was 33 vol%. From these results, it is demonstrated that it was important to form silica as early as possible in hydrolysis of TEOS in order to increase R values. In addition, the effect of R on the catalytic behavior in CO hydrogenation was investigated. At R values below 30%, the turnover frequencies increased with a decrease in R.     

Geothermal resources of Hachijojima

Hachijojima is a gourd-shaped volcanic island in the Pacific Ocean. Nishiyama and Higashiyama volcanoes consist of basalt lava and associated pyroclastic rocks. A promising geothermal resource was found in south Higashiyama, associated with an uplift of Tertiary rocks consisting of mainly andesite lava and related pyroclastic rocks, overlain by Quaternary volcanic rocks. Steep high-temperature (over 250°C) and high-pressure gradients occur in the deeper portion of the system near the Tertiary–Quaternary contact, indicating the presence of a cap rock. The cap rock formed by deposition of hydrothermal minerals. Geothermal fluid ascends from the deeper portions to shallow depths along vertical fractures through the cap rock. These vertical fractures form the geothermal reservoir in the Tertiary formation. Three wells were drilled into these vertical fractures, and approximately 30 t/h of superheated steam was obtained from each well during flow tests. The geothermal fluid is mainly a mixture of seawater and meteoric water in an approximate ratio of 1 to 2, based on chemical analyses, with a portion of volcanic gas included. At present a 3.3 MW_e, geothermal power plant is being constructed here.     

Olfactometric characterization of aroma active compounds in fermented fish paste in comparison with fish sauce,fermented soy paste and sauce products

Aroma active compounds in commercial fermented fish meat paste product (fish miso), fermented soy paste (soy miso), fish sauce and soy sauces were characterized by using a dynamic headspace method for volatile isolation and GC olfactometry for odor perception. A total of 123 volatile compounds consisting mainly of aldehydes, alcohols, esters, ketones, furans, sulfur and nitrogen-containing compounds, aromatics and acids were consistently identified. A major 16 odor-active compounds were distinguished to contribute as key aroma compounds for the miso and sauce products. Olfactometric and sensory findings clearly differentiated miso products with caramelic, fruity aroma notes, whereas fish sauce products were characterized by ammoniacal, fishy, nutty and cheesy odor note. Soy sauce products, however, were dominated by nutty and cheese aroma. Use of koji for fish miso production was found effective to enhance sweet aroma to the product with a reduction of nutty, meaty and rancid nuance. Principal component analysis employed for statistical interpretations clearly elucidated the relationship among different types of fermented products.     

Performance Comparison of Circuits for Pole‐Mounted STATCOM Using SiC Devices

The recent years have seen an increasing trend in the cumulative installed capacity of distributed generators. As a result, voltage management may become difficult in existing power distribution systems in the future. A STATCOM (STAtic synchronous COMpensator) is a promising option for solving this problem because it can control reactive power rapidly and continuously. For a distribution system, STATCOM needs to be pole‐mounted to realize its low cost. However, a transformer for a STATCOM is large and heavy, and hence it is difficult to install a STATCOM on a distribution pole. We adopt a transformerless STATCOM to reduce STATCOM size and use SiC devices with low‐loss performance to obtain a more compact and efficient STATCOM. There are a large number of circuits available for a STATCOM, and there has been considerable research on performance comparisons among these circuits. However, these comparisons were drawn under different conditions, including switching frequency and level number for the circuits. In addition, these comparisons do not include the use of SiC devices. We made an equitable comparison for a 100 kVa pole‐mounted STATCOM using SiC devices. We discuss the performance and characteristics of each circuit in terms of efficiency and volume.     

Recycling Technology for a Recycling Society and the Consumer's Expected Consciousness: Recycling from the Viewpoint of Four Items of Home Appliances

The concept of ‘recycling’ was adopted to solve the overuse of resources by mass production and mass consumption of products in the 20th century. In the latter half of the 20th century, all companies started recycling activities slowly but positively, and some of them established their own recycling plants. This article introduces the processes through which used home appliances are made into materials (for reuse), and the machines, facilities, and methods for such reuse, as well as the results of their actual application by the study of a recycling plant. It is expected that this article would motivate the readers for recycling and to consider and feel what we, consumers, should do. Copyright © 2007 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Structures and electronic properties of surface/edges of nanodiamond and nanographite

The structure, electronic and magnetic properties of nanodiamond and nanographite/nanographene are investigated. Detonation nanodiamond particles that are covered with amorphous graphitic composites are hydrothermally treated to remove the graphitic surface composites and to terminate the surface carbon atoms with hydrogen. The number of localized spins of dangling bonds and the hydrogen concentration increase upon the increase in the hydrothermal treatment time up to 40 h. Above 40 h, both drop discontinuously, a surface structural reconstruction was suggested. The creation of dangling bonds and an incomplete hydrogenation of the surface carbon atoms destabilize the surface, resulting in the structural reconstruction. Nanodiamond particles are thermally converted to nanographite/nanographene. A single nanographene sheet is successfully prepared by heat-treating nanodiamond particles. The edge of graphene sheet with its edge carbon atoms being hydrogen-terminated is investigated by UHV-STM/STS. Zigzag edges are found to have non-bonding π-state of edge origin, in good agreement with theoretical prediction.