Preparation of High-Performance Co3O4 Catalyst for Hydrocarbon Combustion from Co-Containing Hydrogarnet

Supported Co₃O₄ catalysts were prepared via the calcination of Co-containing hydrogarnet, (Ca_3-x Co _x )Al₂(SiO₄)_{3- y} (OH)_4y , at 400 °C. Such precursors with various extents of substitution were synthesized from the hydrothermal reaction of a stoichiometric mixture of calcium oxide, amorphous silica, alumina sol, and cobalt hydroxide at 200 °C. It was found that the catalyst consisted of Co₃O₄, CaO, and mayenite and exhibited a high activity for the combustion of propylene, benzene, and toluene at temperatures below 300 °C.     

Studies on miscibility in homopolymer/ random copolymer blends by equation of state theory

The miscibility of poly(methyl methacrylate) (PMMA) and styrene-acrylonitrile random copolymers (SAN) blends was investigated on the basis of the Flory—Orwoll—Vrij equation of state theory. To obtain the equation of state parameters (P*, V*_sp, T*: characteristic parameters), the pressure—volume—temperature (PVT) behaviour was measured for PMMA and a series of SANs with various acrylonitrile contents. The exchange energy parameter X_ij was also calculated by fitting the theory to some phase diagrams of PMMA/SAN blends. The Flory—Huggins interaction parameter χ was separated into two contributions based on the equation of state theory for mixtures: the exchange energy term χ_inter and the free volume term χ_free. Both the temperature and copolymer composition dependences of χ_inter and χ_free were estimated by calculations using the equation of state parameters. There exists a region in which χ_inter is negative, leading to a miscibility window in PMMA/SAN blends. However, the immiscibility at high temperatures in the blends cannot be explained only by χ_inter; it is caused by the free volume contribution, χ_free. The miscibility window behaviour in PMMA/SAN blends may be explained within the framework of the equation of state theory.     

Effect of poly(vinyl acetate/vinyl alcohol) copolymer with a thiol end group as a steric stabilizer on dispersion polymerization of styrene

In dispersion polymerization of styrene in ethanol, effects of a reactive steric stabilizer, poly(vinyl acetate/vinyl alcohol) copolymer with a thiol end group (P(VAc/VA)-SH), were investigated. In the absence of the thiol end group, the dispersion coagulated at the middle stage of the polymerization, while in the presence of the thiol end group, the polymerization proceeded successfully to result in close to monodisperse particles. The reactive thiol group acts as a site of formation of the block copolymer, that is, polystyrene-b-P(VAc/VA), which is utilized as an effective dispersant. From the measurement on molecular weights during the course of polymerization, two polymerization loci were realized. Addition of butyl methacrylate to styrene affected markedly not only rate of polymerization but also particle size. © 1996 John Wiley & Sons, Inc.     

Computer-based extraction of the inferior alveolar nerve canal in 3-D space

Computed tomography (CT) is increasingly employed in orthodontic treatment. One of the most successful applications is in dental implantology, in which an artificial root is surgically inserted into the jawbone to provide anchorage for a dental prosthesis. For successful implant surgery, it is crucial to locate internal structures such as the inferior alveolar nerve canal (IAC). This paper presents a computerized technique for extracting the IAC. To facilitate the extraction, we first generate panoramic CT images (panoramics) by reformatting the original CT images. The panoramics are a series of cross-sectional images along curved planes through the mandible (lower jawbone). Hollow canals are subsequently detected by analyzing the voxel intensities and 3-D gradient orientations in the panoramics. The axis of the IAC is then traced out by a novel 3-D line-tracking technique. The method is effective for extracting the IAC despite the open structure of the surrounding bone.     

A single solution method for converting 2D assembly drawings to 3D part drawings

Although solid models play a central role in modern CAD systems, 2D CAD systems are still commonly used for designing products without complex curved faces. Therefore, an important task is to convert 2D drawings to solid models, and this is usually carried out manually even in present CAD systems. Many methods have been proposed to automatically convert orthographic part drawings of solid objects to solid models. Unfortunately, products are usually drawn as 2D assembly drawings, and therefore, these methods cannot be applied. A further problem is the difficult and time-consuming task of decomposing 2D assembly drawings into 2D part drawings. In previous work, the authors proposed a method to automatically decompose 2D assembly drawings into 3D part drawings, from which 2D part drawings can be easily generated. However, one problem with the proposed method was that the number of solutions could easily explode if the 2D assembly drawings became complex. Building on this work, here we describe a new method to automatically convert 2D assembly drawings to 3D part drawings, generating a unique solution for designers regardless of the complexity of the original 2D assembly drawings. The only requirement for the approach is that the assembly drawings consist of standard parts such as bars and plates. In 2D assembly drawings, the dimensions, part numbers and parts lists are usually drawn, and the proposed method utilizes these to obtain a unique solution.     

High-Accuracy Analysis of Beams of Bimodulus Materials

Recently, several authors have treated the problems of bending of beams of bimodulus materials. The present paper, applies Levinson beam theory, which includes shear deformation and warping of the cross section, to bending analysis of thick rectangular beams with bimodulus materials. Many numerical results are obtained by use of the transfer matrix approach and compared with the methods of Bernoulli-Euler beam theory, Timoshenko beam theory, and Levinson beam theory with various boundaries. Also, the neutral-surface location and displacements for beams of bimodulus materials are calculated.     

Gradient orientation pattern matching with the Hamming distance

This paper presents a novel pattern matching technique that is robust to illumination changes and the occlusion problem. The technique is based on the matching of gradient orientations in place of traditional image features such as intensities or gradients. Gradient orientations depend on the texture in an image. They are known to be insensitive to changes of image intensities that are often caused by time-varying illuminations or the auto-gain control (AGC) function of the camera. Moreover,the proposed method employs a voting strategy in the process of matching gradient orientations. The method works remarkably well even when a large part of the pattern is occluded with a foreign object. Consequently, the proposed method is robust to both irregular lighting conditions and the occlusion problem.     

Dummy humanoid robot simulating several trunk postures and abdominal shapes – Report of element technologies

Development of clothing in consideration of the shape and body function of a person with spinal cord injury is an important task. Then, a dummy robot with a deformation mechanism was developed in this study for evaluating the comfortable level of clothings. Specifically, a trunk joint mechanism and an abdominal mechanism that can realize various deformations of the abdominal area and various trunk poses were developed. The trunk joint mechanism was implemented in order to simulate the seated posture of persons with spinal cord injury. The abdominal deformation mechanism was implemented using linear actuators and rotating servomotors in order to simulate abdominal obesity of persons with spinal cord injury. Further, a tactile sensor system was developed for measuring the clothing pressure on the abdominal area and evaluating the comfort or discomfort of clothing.     

Highly reliable oxide‐semiconductor TFT for AMOLED displays

Abstract— The stability and reliability of oxide‐semiconductor TFTs were investigated. The contact material to the oxide semiconductor affected the thermal stability of the TFT, and a molybdenum‐contact source/drain showed good stability. And the passivating film and TFT structure affected the stability against bias stress and humidity stress, and dc‐sputtered Al²O³ passivation and fully covered channel structure with an etching stopper or source/drain showed good reliability. Moreover, high photo‐stability was confirmed by the bias‐enhanced photo‐irradiation stress test. An 11.7‐in.‐diagonal qHD AMOLED display was demonstrated to provide an applicable solution for a large‐sized OLED and an ultra‐high‐definition LCD‐TV mass production.     

A design of high optical efficiency wedge type light guide plate adopting twin inclined cylindrical surface

We propose wedge type light guide plate (LGP) adopting twin inclined cylindrical surfaces (TICS) at the incident part of a LGP. It has higher optical efficiency than conventional wedge type LGP. In dimension of LGP which the thickness of incident part is 1.5 mm and that of luminance part is 0.7 mm, the optical efficiency of wedge type LGP adopting TICS is expected to be 96% in comparison with a normal flat LGP. In addition, there is an advantage to reduce the non‐uniformity of vicinity of light emitted diodes (LEDs) by TICS reflecting light laterally. However, it is necessary that the LED centers are aligned with the intersections of TICS. The misalignment of LED causes non‐uniformity of optical profile that is slightly larger than a normal LGP.