Development of a neutron personal dose equivalent detector

A new neutron-measuring instrument that is intended to measure a neutron personal dose equivalent, H(p)(10) was developed. This instrument is composed of two parts: (1) a conventional moderator-based neutron dose equivalent meter and (2) a neutron shield made of borated polyethylene, which covers a backward hemisphere to adjust the angular dependence. The whole design was determined on the basis of MCNP calculations so as to have response characteristics that would generally match both the energy and angular dependencies of H(p)(10). This new instrument will be a great help in assessing the reference values of neutron H(p)(10) during field testing of personal neutron dosemeters in workplaces and also in interpreting their readings.     

A unimolecular nanocapsule: Encapsulation property of amphiphilic polymer based on hyperbranched polythreitol

Hyperbranched polythreitol (1) with different molecular weights (M_w,SLS: 1.18 × 10⁴ and 4.79 × 10⁴) was reacted with trityl chloride in DMF to afford a novel amphiphilic polymer (2) consisting of 1 as the hydrophilic core and the trityl groups as the hydrophobic shell. Compound 2 was tested for its ability to act as a unimolecular nanocapsule toward the water-soluble dye, rose bengal (RB). Their encapsulation and release properties were also evaluated by comparison with the degree of substitution (DS) of the trityl groups, i.e., the hydrophobic shell density. The polymers were found to have very good unimolecular nanocapsule characteristics even at extremely low concentrations. The average number of RBs per polymer molecule depended on the hydrophilic core size and the hydrophobic shell density. The increasing DS value led to a decrease in the encapsulated amount due to the decrease in the hydrophilic core space, while the low DS value (less than ca. 20 mol%) led to a destabilization as a unimolecular nanocapsule and a lower encapsulation ability. In particular, 2 with ca. 23% DS value showed an efficient encapsulation. Based on a release test of the RB-loaded unimolecular nanocapsules, the polymers showed a high RB-holding ability in water.     

Numerical and Experimental Analysis for the Small Vibration of Aerostatic Guideways

Aerostatic guideways have been used in many fields and are absolutely essential for ultraprecision machining. Recently, with increasing demand for ultraprecision devices, the accuracy of 1nm or less has become necessary. On the other hand, conventional aerostatic guideways are not designed considering the influence of small vibration which occurs by supplying air. This vibration is hampering the improvement in accuracy. In this study, a new design of the outlet of orifice restrictors is proposed from the result of numerical analysis and its effect is examined numerically and experimentally. The mechanism for the occurrence of small vibration is analyzed and the methods to suppress the small vibration are proposed.     

Synthesis and Photocrosslinking Reaction of N-Allylcarbamoylmethyl Cellulose Leading to Hydrogel

Summary The reaction of the carboxymethyl cellulose sodium salt (Na-CMC) (degrees of substitution (DS) = 1.2) with N-hydroxysuccinimide (Su-OH) in the presence of 1-hydroxybenzotriazole and 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide (EDC) was carried out in water to obtain the Su-OH ester of carboxymethyl cellulose, Su-CMC, with the DS values of 0.19 – 1.04. N-Allylcarbamoylmethyl cellulose (Allyl-CMC), which was prepared from the reaction of Su-CMC with an excess amount of allylamine, was crosslinked by UV-irradiation. In addition, the photocrosslinked Allyl-CMC film was swollen with water to form a hydrogel having a relatively high water-swelling property, e.g., the degree of swelling (ds) was ca. 360% for Allyl-CMC with the DS of 0.93.     

Superconductivity in W-containing diamond-like nanocomposite films

Superconductivity in a tungsten-containing carbon-oxide film was reported. The film with 500 nm thickness was deposited onto polycrystalline silicon oxides using chemical vapor deposition and the co-sputtering of a tungsten metal target. The bonding state of the carbon atoms and the macroscopic and microscopic crystal structure of the film were investigated by Raman spectroscopy, X-ray diffraction and transmission electron microscopy measurements. From the experimental results, we determined that this film essentially had an amorphous structure. The temperature dependence on resistivity was measured in the temperature range of 2–300 K. Resistive superconducting transition was observed at 3.8 K. The dc magnetizations were measured in the temperature range of 1.8–6.5 K. The diamagnetism resulting from a superconductive state was observed below 3.75 K, which is consistent with a resistive superconducting transition. It is thought that the finite sized clusters of the different superconductive transition temperatures cooperatively produce a macroscopic superconducting phenomenon.     

Application results of a prototype ultrasonic liquid film sensor to a 7 MPa steam–water two-phase flow experiment

A prototype ultrasonic liquid film sensor was applied to a high-temperature steam–water two-phase flow experiment. The liquid film sensor was vertically installed in a loop which was connected to HUSTLE, a multi-purpose steam source test facility. The hydraulic diameter of the measurement section was 9.4 mm. The output waveforms of the sensor were acquired with a digital oscilloscope. The fluid temperature and system pressure were kept at 288 °C and 7.2 MPa, respectively, during the experiment. The pulse-echo method was used to calculate the liquid film thickness. The cross-correlation calculation was utilized to determine the time difference between the pulse reflected at the sensor surface and the pulse reflected at the liquid film surface. The time-averaged liquid film thicknesses were less than 0.055 mm in the annular flow condition. The increase of the time-averaged thickness was small with the change of the gas momentum flux. The film thicknesses measured with the sensor were compared with the past experimental results; the former were smaller than one-fourth of the thickness estimated as the mean film thickness. The comparison results suggested that the continuous liquid sublayer thickness was measured with the liquid film sensor.     

Bacteriological, pharmacokinetic and clinical evaluation of azithromycin in the pediatric field]

Azithromycin (AZM), a new macrolide antibiotic, in fine granules and in capsules was studied for pharmacokinetic and clinical evaluation in the pediatric patients. Antibacterial activity of AZM against 43 clinical isolates: AZM exhibited slightly lower activity against Gram-positive bacteria and 2-8-fold higher activity against Gram-negative bacteria than erythromycin or clarithromycin. Plasma or urine samples were collected from eight patients receiving the drug in fine granular form, and two patients receiving it in capsules for the determination of drug levels. The elimination half-lives of AZM after administration at dose of 10 mg/kg/day for 3 days were 50.0 and 51.2 hours for fine granules, and 41.5 hours for capsules. AUC0-infinity was 11.7 and 24.3 micrograms.hr/ml for fine granules, and 8.3 micrograms.hr/ml for capsules. The cumulative excretion rates up to 120 hours after the start of treatment were 8.24 and 13.84% for fine granules, and 3.83% for capsules. AZM was administered to 123 patients once daily at 3.7-20.0 mg/kg body weight over 3 to 5 days with reference to the standard dose of 10 mg/kg. The drug was used to treat patients with pharyngitis, tonsillitis, scarlet fever, pneumonia, mycoplasmal pneumonia, chlamydial pneumonia, otitis media, pertussis, intestinal infection, and SSTI. The effectiveness of AZM was evaluated in 109 cases. The drug was rated "excellent" in 65.1% of the patients and "good" in 29.4%, resulting in an efficacy rate of 94.5%. Furthermore, AZM eradicated 43 of 46 (93.5%) bacteria that had been identified before the treatment. Three patients complained of side effects of urticaria (1 case) and diarrhea (2 cases). Abnormal laboratory changes were reported as follows: decreased leukocyte (3 cases), increased eosinophil (5), increased platelet (2), increased eosinophil and platelet, elevated GPT (1), and elevated GOT and GPT (1). The abnormalities, however, were mild enough to raise no clinically significant problems. In conclusion, AZM in once daily regimen was effective and safe in treatment of pediatric infections.     

A study on AIDS awareness and knowledge. Report II. Investigation of clinical technician, nurse and office staff

After ingestion of an unknown dose of detajmium, a 14-year-old female collapsed with asystolia. Resuscitation efforts were not successful. A medicolegal autopsy was carried out, and blood, liver and gastric content were extracted and analyzed by gas chromatography-mass spectrometry (GC-MS). After derivatization with acetic anhydride, detajmium and twelve of its derivatives and metabolites were identified. The main metabolic pathways include hydroxylation and subsequent O-methylation of the indol ring, and oxidation as well as reduction of the C-21 hydroxyl function. Cleavage of the N-alkyl side-chain is a further, possibly non-enzymatic degradation pathway. Artifact formation induced by acetylation included dehydratation of the hydroxyl function of C-21 and the N-alkyl side-chain. The detajmium concentration in blood of the decreased was determined by high-performance liquid chromatography with fluorimetric detection (12 micrograms/ml).     

The effects of frequently rotating shiftwork on sleep and the family life of hospital nurses

The effects of three frequently rotating shifts in an irregular sequence on the daily activities of 239 Japanese female hospital nurses were studied by the time-budget method. The nurses recorded their daily activities for several consecutive days. The questionnaire was returned by 80.8% of the participants, and recordings of 1016 days were analysed. A two-way analysis of variance clarified that the shift combination influenced the daily activities. The most distinct result was that nurses spent significantly more time on free-time activities on the day when they worked the night shift followed by the evening shift than they did on the day when they worked any other shift combination. Nurses offset sleep deprivation either by sleeping during the day before and after working the night shift (82-100%) or by sleeping 2 to 4 h later in the morning after working the evening shift and on days off. There was a strong positive correlation between total sleep time (including day sleep) and the length of the interval between two consecutive shifts (r = 0.95, p < 0.001). This result suggests that more than 16 h between work shifts is required to allow more than 7 h of total sleep time. In an analysis by household status, nurses who had young children (average age, 2.8 years) slept less and spent less time on free-time activities than did other nurses.