Hydrogen production through dry reforming of biogas using a porous electrochemical cell: Effects of a cobalt catalyst in the electrode and mixing of air with biogas

This paper reports the performance of porous Gd-doped ceria (GDC) electrochemical cells with Co metal in both electrodes (cell No. 1) and with Ni metal in the cathode and Co metal in the anode (cell No. 2) for CO₂ decomposition, CH₄ decomposition, and the dry reforming reaction of a biogas with CO₂ gas (CH₄ + CO₂ → 2H₂ + 2CO) or with O₂ gas in air (3CH₄ +?1.875CO₂ +?1.314O₂ → 6H₂ +?4.875CO +?0.7515O₂). GDC cell No. 1 produced H₂ gas at formation rates of 0.055 and 0.33?mL-H₂/(min?m²-electrode) per 1?mL-supplied gas/(min?m²-electrode) at 600?°C and 800?°C, respectively, by the reforming of the biogas with CO₂ gas. Similarly, cell No. 2 produced H₂ gas at formation rates of 0.40?mL-H₂/(min?m²) per 1?mL-supplied gas/(min?m²) at 800?°C from a mixture of biogas and CO₂ gas. The dry reforming of a real biogas with CO₂ or O₂ gas at 800?°C proceeded thermodynamically over the Co or Ni metal catalyst in the cathode of the porous GDC cell. Faraday's law controlled the dry reforming rate of the biogas at 600?°C in cell No. 2. This paper also clarifies the influence of carbon deposition, which originates from CH₄ pyrolysis (CH₄ → C + 2H₂) and disproportionation of CO gas (2CO → C + CO₂), on the cell performance during dry reforming. The dry reforming of a biogas with O₂ molecules from air exhibits high durability because of the oxidation of the deposited carbon by supplied air.     

Site‐Selective Iron(III) Chloride‐Catalyzed Arylation of 4‐Aryl‐4‐methoxy‐2,5‐cyclohexadienones for the Synthesis of Polyarylated Phenols

The iron(III) chloride‐catalyzed Friedel–Crafts arylation of 4‐aryl‐4‐methoxy‐2,5‐cyclohexadienones, which were easily prepared by the phenyliodine(III) diacetate (PIDA)‐mediated oxidation of 4‐arylphenols in methanol, proceeded site‐selectively to form meta‐terphenyl (2,4‐diarylphenol) derivatives in good yields. The subsequent PIDA‐mediated oxidation and iron(III) chloride‐catalyzed Friedel–Crafts arylation of the resulting products gave the corresponding 2,4,6‐triarylphenol derivatives. The present method provides useful highly substituted polyarylated compounds.

     

Synthesis and Characterization of Cellulose Carbamates Having α-Amino Acid Moieties

Summary The reaction of cellulose with N-carbonyl α-amino acid ester 1 leading to cellulose carbamate 2 was carried out in N,N-dimethylacetamide at 100 °C. For N-carbonyl L-leucine ethyl ester (1a), the degree of the carbamate substituent (DS) in 2a was 2.5 for [1a]/[glucose units in cellulose] = 3.0 and reached ca. 3.0 for [1a]/[glucose units in cellulose] = 4.0. Cellulose carbamate 2a was highly soluble in not only aprotic polar solvents but also other organic solvents such as ethyl ether and methyl alcohol. The chiral discrimination ability of 2a was higher than those of the cellulose carbamates having L-phenylalanine and L-aspartic acid moieties.     

Flow characteristics of a small moving bed downcomer with an orifice under negative pressure gradient

Behaviour of gas-solid mixtures in a small moving bed downcomer operating under negative pressure gradient has been investigated experimentally, because flow characteristics in a downcomer are important factors in powder handling processes, such as a multi-stage spouted bed or a circulating fluidized bed. In this study, a small downcomer in which the moving bed height could be controlled was employed with the intention of using a downcomer as a connecting tube in a multi-stage spouted bed. Based on experimental observation, the moving bed flow changed from smooth flow (Region(I)) to slip-stick flow (Region(II)) and then changed from slip-stick flow to intermittent flow (Regime(III)), as the gas pressure gradient in the downcomer was increased. In this study, the critical point for steady-state (Region(I)) operation was also examined experimentally and theoretically, by using eight kinds of solid particles (Geldart B, D and A powders) and six different orifice sizes which were used to restrict solids flow at the base of the downcomer. As a result, a correlation of solids flow rate in the stable moving bed downcomer under negative pressure gradient was derived and the critical point between stable and unstable flow was explained by the proposed model.     

Deposition of DLC film with adhesive W-DLC layer on stainless steel and its tribological properties

Tribological properties of a diamond-like carbon (DLC) coating with an adhesive tungsten-containing DLC (W-DLC) layer were investigated. The coatings were deposited onto AISI316L steel substrates and Si wafers using plasma enhanced chemical vapor deposition and tungsten co-sputtering of the metal target. Methane and argon gases were used as the precursor of the coatings. In this study, three types of coatings were evaluated: DLC/W-DLC on AISI316L (DLC-1), DLC/W-DLC on Si wafer (DLC-2), and DLC on Si wafer (DLC-3). The structural characterizations were performed by transmission electron microscopy and tapping mode atomic force microscopy. At the boundary between the W-DLC layer and the AISI316L substrate, microscopic decohesion or delamination was not observed. The surface roughness of the DLC-1 coating was greater than that of the DLC-2 coating. This feature was derived from the surface roughness of the initial surface of the AISI316L substrate. Friction tests were performed using a rotation-type ball-on-flat configuration tribometer. The observed friction of the DLC-1 coating was unstable compared with the DLC-2 or DLC-3 coatings. This was due to wear debris which had risen to the friction surface resulting in unstable friction on the DLC-1 coating. During the friction studies, the top DLC layer was removed from the adhesive W-DLC layer because the adhesive strength at this part was not enough. In order to achieve the low and stable friction of the DLC coating with the W-DLC layer on AISI316L, it is necessary to improve the smoothness of the surface and the adhesion between the DLC coating and the W-DLC layer.     

In-plane detection of scattered light from a minute particle using a resin-based light waveguide incorporated with a microfluidic channel

An optical sensor combined total analysis system (TAS) is thought to be one of the most powerful functional elements needed to realize a “ubiquitous human healthcare” system. In accordance with this concept, we have proposed a fundamental structure of detecting side scattered light from a minute cell or particle running along a microfluidic channel, partially utilizing the channel filled with water or saline solution as a light waveguide. Based on this concept, we have fabricated a trial-manufactured optical TAS chip and carefully evaluated its side scattered light measuring performance in in-plane direction, supplying and detecting visible laser power by using multiple optical fibers and their precise positioning mechanisms. We have successfully obtained experimental results of both transmitted light power change and that of side scattered light, and we confirmed that there was a strong relationship between their signal waveforms. Furthermore, we have developed a hybrid numerical calculation method on the basis of the finite-difference time-domain method, in addition to the beam propagation method. Based on this hybrid method, we tried to compare results between the experimental inverse pulse of transmitted light and a pulse of side scattered light, and those based on numerical calculations. Excellent qualitative accordance was obtained between the inverse pulse of numerical and experimental results. In contrast, the experimental pulse of side scattered light indicated a considerably spread base in comparison to the numerical results.     

New parallel driving strategy based on modified converters and peak current mode control for photovoltaic power generation systems

This paper proposes a modified converter for use in photovoltaic system. In the modified converter, the voltage ratio of output to input is equal to that of the general boost converter. The difference between the two converters is the configuration of output terminal. Therefore, the working voltage of an output capacitor and the value of its capacitance can be lower than those of the general boost converter. This paper also presents an efficient parallel driving scheme to increase output power and to reduce the output voltage ripple. The parallel driving method using the modified converter and current mode control gives a good solution for alleviating the current sharing unbalance problem. It reduces the output voltage ripple by increasing the equivalent switching frequency of the modified converter. The performance of the proposed converter system is verified through computer-aided simulations and experimental results.     

Contact force detection on a minute aperture mounted optical contact slider using an acoustic emission sensor

Advances in the digital network society require both higher density and higher transfer rates in all sorts of storage systems. Especially in optical recording, the trend toward higher density and larger capacity requires novel surface-recording technologies that can drastically diminish head-to-medium spacing, resulting in an improvement in spatial resolution and, finally, a higher recording density. To this end, we have already proposed a novel contact optical head slider that is able to almost cancel the suspension load by generating hydrodynamic pressure, thus realizing a lower net contact force. Evaluating the dynamic contact force is requisite in realizing its stable sliding operation and higher signal readout performance. In this study, a continuous acoustic emission (AE) signal was utilized to detect the dynamic contact force. AE signal modulation was compared with the applied out-of-plane acceleration on a medium generated by a spindle combined piezo-electric actuator. It was clarified that the detected AE modulation amplitude was approximately proportional to the applied acceleration, and that utilizing AE modulation will be a useful method for evaluating dynamic contact force.     

Poly(tetrafluoroethylene)/(hexafluoropropylene) coatings for mitigating the corrosion of steel in a simulated geothermal environment

Study focused on investigating the usefulness of room temperature-curable poly(tetrafluoroethylene)/(hexafluoropropylene) as a polyfluorocarbon coating for mitigating corrosion of carbon steel in a simulated geothermal environment. Coated steel panels were exposed for up to 20 days in an autoclave containing 20,000 ppm CO₂-laden 13 wt.% NaCl solution at 200°C. The appearance of the coatings after 20 days exposure revealed that they adequately protected the underlying steel substrate against corrosion in this short-term exposure. However, the superficial layer of coating suffered hydrothermal oxidation, leading to conformational transformation of the fluorocarbon structure into a fragmental fluorocarboxylic acid derivative as the oxidation reaction product. This transformation generated three undesirable features: (1) an increase in the susceptibility of the coating surfaces to moisture; (2) a decline in the thermal stability of the coatings; (3) a reduction of the crystallinity of the polymer.     

A Novel Method of "Double delta Modulation" on Tracking Control of PWM converters

非线性跟踪控制是SPWM变换器的重要控制策略之一。提出了一种新型双重△调制跟踪控制方法,它由一个无滞环比较器和一个载波周期定时器组成。比较器产生PWM信号的上升沿,使得跟踪控制响应快,精度高;定时器决定PWM信号的下降沿,它保证了开关周期固定不变;文中提出了一个按周期对比较阈值进行预估调节的算法,该算法可使每个周期的平均跟踪误差均为零,同时可以抑制子谐振和跟踪失步。对三相四线电压跌落补偿系统电压跟踪的仿真研究证实了“双重△调制”策略和比较阈值的一步预估算法的有效性。最后对一个单相半桥逆变器的电流跟踪控制给出了实验结果。