Soluble and colorless polyimides with polyalicyclic structures [1]

Two tetracarboxylic dianhydrides with polyalicyclic structure, bicyclo[2.2.2]octane-2-endo, 3-endo, 5-exo, 6-exo-2,3:5,6-dianhydride (5a) and the all-exo isomer (5b), were synthesized in six steps using phthalic acid as a starting material. The dianhydrides were polymerized at 85–105°C in well-purified DMAc with aromatic diamines which were purified by two recrystallizations and then sublimation. The polyimides formed flexible and tough films, and were soluble in aprotic polar solvents such as DMAc. The 5%-weight loss temperatures were over 450°C. The polyimides possessed glass-transition temperatures in the range from 211 to 385°C. The polyimides films had a tensile modulus range of 1.5–2.6 GPa, a tensile strength range of 52–96 MPa, and an elongation range at break of 3–11%. The polyimide films showed cutoffs at wavelengths shorter than 320 nm and were entirely colorless. The colorlessness of the polyimide films was maintained up to 200°C when heated in air and to 400°C in a N₂ atmosphere.     

Shape from Shading with Interreflections Under a Proximal Light Source: Distortion-Free Copying of an Unfolded Book

We address the problem of recovering the 3D shape of an unfolded book surface from the shading information in a scanner image. This shape-from-shading problem in a real world environment is made difficult by a proximal, moving light source, interreflections, specular reflections, and a nonuniform albedo distribution. Taking all these factors into account, we formulate the problem as an iterative, non-linear optimization problem. Piecewise polynomial models of the 3D shape and albedo distribution are introduced to efficiently and stably compute the shape in practice. Finally, we propose a method to restore the distorted scanner image based on the reconstructed 3D shape. The image restoration experiments for real book surfaces demonstrate that much of the geometric and photometric distortions are removed by our method.     

An investigation of the effect of fatigue deformation on the residual mechanical properties of Ti-6Al-4V ELI

Tensile properties, hardness, and Charpy impact toughness of Ti-6Al-4V extralow interstitial (ELI) with equiaxed α and Widmanstätten α structures at various stages of fatigue were investigated. Fatigue crack initiation characteristics of the same alloy were also investigated in this study. In the equiaxed α structure, fatigue cracks initiated mainly at the interface between primary-α grains, while in the Widmanstätten α structure, they initiated across α plates at an angle of around 45 deg to the stress axis. Specimens with the Widmanstätten α structure fractured before adequate fatigue hardening was achieved because a multitude of microcracks readily formed. Specimens with the equiaxed α structure fractured after adequate fatigue hardening developed. Tensile strength, 0.2 pct proof stress, and hardness increased clearly with increasing stress cycles and fatigue steps, particulary in the low-cycle fatigue (LCF) region, while impact toughness and elongation showed a reverse trend. It is suggested, therefore, that the dislocation density multiplies more rapidly near the specimen surface during the early stages of fatigue, while during the later stages of fatigue, dislocation density increases near the center of the specimen. Also, the dislocation multiplication will continue until saturation of the entire specimen has occurred.     

Effects of microstructure on the short fatigue crack initiation and propagation characteristics of biomedical α/β titanium alloys

This article presents the results of a study of the effects of microstructure on the fatigue strength and the short fatigue crack initiation and propagation characteristics of a biomedical α/β titanium alloy, Ti-6Al-7Nb. The results are compared to those obtained from a Ti-6Al-4V extra-low interstitial (ELI) alloy. Fatigue crack initiation occurs mainly at primary α grain boundaries in an equiaxed α structure, whereas, in a Widmanst?tten α structure, initiation occurs within the α colonies and prior β grains, where α plates are inclined at around 45 deg to the stress-axis direction. In an equiaxed α structure, the short fatigue crack initiation and propagation life, where the length of the crack (a) is in a microstructurally short fatigue-crack regime (2a < 50 μm), occupies around 50 pct of the total fatigue life. On the other hand, the fatigue crack in a Widmanst?tten α structure initiates at very early stages of fatigue, and, therefore, the fatigue crack-initiation life occupies a few percentages of the total fatigue life in an α structure. Then, the short fatigue crack propagates rapidly and is arrested at the grain boundaries of α colonies or prior β grains for a relatively long period, until the short crack passes through the boundaries to specimen failure. Therefore, the short fatigue crack-arrest life occupies more than 90 pct of the total fatigue life in a Widmanst?tten α structure. These trends are similar between the Ti-6Al-7Nb and Ti-6Al-4V ELI alloys and biomedical α/β titanium alloys. The total fatigue life for the Ti-6Al-7Nb alloy with an equiaxed α structure is changed by the volume fraction of primary α phase and the cooling rate after solution treatment. By increasing the volume fraction of the primary α phase from 0 to 70 pct, the fatigue limit of the Ti-6Al-7Nb alloy is raised. Changing the cooling rate after solution treatment by switching from air cooling to water quenching improves the fatigue limit of the Ti-6Al-7Nb alloy significantly.     

Effect of aluminium on the polymerization silicic acid in aqueous solution and the deposition of silica of silica

The effect of aluminium on the polymerization of silicic acid was studied at pH 7, 8 and 9 in the aluminium concentration range of 0–26 ppm (Al) by spectrophotometry, gel chromatography and ²⁷Al NMR. Retarding and accelerating effects of aluminium on the growth of polysilicic acid particles and on the reaction between monosilicic acid and polysilicic acid were observed by changing the pH. It is suggested that the accelerating effect on the reaction between polysilicic acid particles is due to the formation of aluminium hydroxide on the surface of polysilicic acid. The rate of decrease in the monosilicic acid concentration in the presence of aluminium was faster than that in the absence of aluminium at pH 9, because monosilicic acid could be adsorbed rapidly on the aluminium hydroxide. From the results it was presumed that the formation of aluminium hydroxide on the solid surface may accelerate the deposition of silicic acid from geothermal water.     

A MAGE-1-encoded HLA-A24-binding synthetic peptide induces specific anti-tumor cytotoxic T lymphocytes

Although several MAGE-1 peptides have already been identified, the MAGE-1-encoded peptide presented by HLA-A24, which is the most common allele in Japanese population and is also frequently present in Caucasians, might have a wide applicability for immunotherapy using these peptides. To identify this potential peptide, we examined the induction of specific cytotoxic T lymphocytes (CTL) from the peripheral-blood mononuclear cells (PBMC) in HLA-A24 healthy donors by in vitro stimulation with MAGE-1-encoded synthetic peptides with a binding affinity for HLA-A24, by a simplified method. Of the 5 peptides tested, the highest HLA binder (NYKHCFPEI) was able to elicit CTL from unseparated PBMC by stimulation with freshly isolated, peptide-pulsed PMBC as antigen-presenting cells (APC) and by also using interleukin 7 and keyhole-limpet hemocyanin for a primary culture. The induced CTL could thus lyse HLA-A24 tumor cells expressing MAGE-1, as well as the peptide-pulsed target cells, in an HLA-class-I-restricted manner. By using the MAGE-1/HLA-A24 peptide, NYKHCFPEI, we found it possible to immunize many more patients, especially Japanese patients, by means of such peptide-based immunotherapeutic approaches to MAGE-1-positive malignant tumors.     

Numerical simulation of fracture of model Al-Si alloys

Hypoeutectic Al-Si alloys consist of primary α-Al and Al-Si eutectic phases and show typical elasticplastic fracture. To understand their fracture behavior, fracture processes were simulated using an elastic-plastic finite-element method. The validity of the J-integral-based criterion was verified and applied to the simulations. A complicated model was used to simulate the fracture in an idealized dendritic microstructure, and four simplified models were intended to more clearly understand the interaction between a crack and individual α phases. Results show that the crack is attracted to the soft α phase when passing by the α phase, whereas it is repelled when the α phase is close in front of or behind the crack tip. The presence of α phase close in front of or behind the crack tip leads to an amplification of the driving force. However, the α phase beside the tip reduces the driving force. Furthermore, the fracture behavior is mainly affected by the adjacent α phase on one side around the crack tip, while the remote α phase on the opposite side has an offsetting effect. The local stress-strain fields were examined to analyze the simulated behavior. The simulated crack-growth path in the dendritic model was compared and verified with the experimentally observed path.     

MACSYM: A hierarchical parallel image processing system for event-driven pattern understanding of documents

MACSYM is a hierarchical parallel processing system for pattern understanding applications. It features event-driven parallel processing for knowledge-based understanding of document images. The system is composed of a master processor, slave processors and a large shared memory, and is equipped with versatile communication facilities. The parallel processing software system M.UM has been developed on MACSYM. It supplies a parallel processing language MacC, an extended version of C, and supports the programming for document image understanding. The Japanese newspaper layout understanding system EXPRESS is being developed on MACSYM. It analyzes a newspaper image and extracts articles in a few seconds.     

Void fraction measurement by a gamma-ray densitometer under instantaneous pipe rupture

A high-response gamma-ray densitometer was developed for the measurement of void fraction caused by the flashing vaporization of high-pressure and -temperature water under an instantaneous pipe break accident of a boiling water reactor, BWR. The initial conditions of the water were 6.86 MPa in pressure and saturation temperature. In order to prove the reliability and accuracy, the calibration test by dropping the acrylic void simulators and the air injection test into the cold water filled in the pipe were conducted.The following results are obtained in the experiments: (1) the cone slit method is very useful to increase the measuring accuracy, (2) it is clearly observed that the apparent increase of the void fraction occurs after the rarefaction wave passes, (3) the first maximum of the void fraction occurs with some delay time after break. Secondly, the minimum void fraction concurs with the maximum pressure in the pressure recovering process.