Helium gas permeability of montmorillonite/epoxy nanocomposites

Helium gas permeability of silicate clay (montmorillonite) particles/epoxy nanocomposites was examined. The incorporation of increasing amounts of montmorillonite particles reduced the helium gas permeability. Based on Fick’s law, gas permeation behavior of the nanocomposite was evaluated. With the increase of montmorillonite loading, gas diffusivity decreased, while gas solubility increased. Helium diffusion behavior is in agreement to the numerical results based on the Hatta–Taya–Eshelby theory. It has been revealed that dispersion of nanoscale platelets in polymer is effective in improving gas barrier property.     

Further study on different dopings into PbWO4 single crystals to increase the scintillation light yield

Since we presented our preliminary result (Nucl. Instr. and Meth. A 486 (2002) 170) at SCINT2001, we have continued our efforts to increase the light yield (LY) of PbWO₄ scintillators by extending different dopings with an aim to find a possibility of using PbWO₄ successfully in Positron Emission Tomography (PET). Overall result obtained for single doping as well as double and tripple co-dopings are summarized, including decay characteristics and radiation hardness. The LY in non-doped PbWO₄ crystals with a size of 10×10×(20–30) mm³ is 25–35 photolectrons/MeV (phe/MeV) corresponding to 3–4% of the LY in BGO, when measured with a bialkali photomultiplier during a gate of 1 μs. The maximum LY increased to 49 phe/MeV for single doping with Mo⁶⁺, 80 phe/MeV for double co-doping of Mo⁶⁺+Sb⁵⁺, and 85 phe/MeV for tripple co-doping of Mo⁶⁺+Cd²⁺+Sb⁵⁺. The radiation hardness is larger than 10⁵ Gy for each of the samples co-doped with Mo⁶⁺+Sb⁵⁺ and Mo⁶⁺+Cd²⁺+Sb⁵⁺, while it is much poorer in PWO:Mo⁶⁺. In each of these co-doped samples, a medium-speed green emission in the microsecond range is created besides the fundamental fast (a few nanoseconds range) blue one, giving a peak at 500 nm in the radioluminescence spectrum similarly as in PWO:Mo⁶⁺.     

Two-group interfacial area transport in vertical air-water flow: I. Mechanistic model

The prediction of the dynamical evolution of interfacial area concentration is one of the most challenging tasks in two-fluid model application. This paper is focused on developing theoretical models for interfacial area source and sink terms for a two-group interfacial area transport equation. Mechanistic models of major fluid particle interaction phenomena involving two bubble groups are proposed, including the shearing-off of small bubbles from slug/cap bubbles, the wake entrainment of spherical/distorted bubble group into slug/cap bubble group, the wake acceleration and coalescence between slug/cap bubbles, and the breakup of slug/cap bubbles due to turbulent eddy impacts. The existing one-group interaction terms are extended in considering the generation of cap bubbles, as well as different parametric dependences when these terms are applied to the slug flow regime. The complete set of modeling equations is closed and continuously covers the bubbly flow, slug flow, and churn-turbulent flow regimes. Prediction of the interfacial area concentration evolution using a one-dimensional two-group transport equation and evaluation with experimental results are described in a companion paper.     

Noninvasive blood glucose assay using a newly developed near-infrared system

This paper reports in vivo near-infrared (NIR) noninvasive blood glucose assay using dermis tissue spectra. We assume that the glucose content in dermis tissue traces the variations in blood glucose. For dermis spectra measurements, epidermis, especially stratum corneum, acts as an interference in skin tissue. Thus, we have developed a method for the selective measurement of dermis tissue spectra, enabling us to obtain better quality spectra for an accurate blood glucose assay. The selective measurement of the dermis spectra realized by using a newly developed fiber-optic probe that consists of source and detector optical fibers separated by 0.65 mm on a skin surface. The light path in the skin tissue for this geometry has been simulated by a Monte Carlo method. The simulation results show that detected light mainly interrogates dermis tissue. As the absorbance signal of glucose in human tissue is extremely small, the quality of the measured spectra is critical for the reliable assay. The present method for blood glucose assay has been applied to one Type 1 diabetic. The correlation coefficient between the blood glucose content predicted by NIR spectra and those measured by finger-prick was 0.928 and the standard error of prediction was 32.2 mg/dL. These results demonstrate the potential of our methodology for noninvasive NIR blood glucose assay.     

Frequency range extension of actively mode-locked lasers integratedwith electroabsorption modulators using chirped gratings

We have fabricated actively mode-locked lasers integrated with electroabsorption modulators and chirped gratings. A chirped grating with a large chirp rate of 1.45 Å/μm can be realized by using multiphase-shifted patterns. Short pulses of 4-6 ps were generated over a wide frequency range from 18.9-19.8 GHz. We observed jumps in the wavelength during detuning. These jumps arise from multiple lobes in the reflectivity spectrum. It is found that the wavelength jumps cause increases in the intensity noise. We showed that by reducing the grating length from 150 to 100 μm the sidelobes were suppressed and the detuning frequency range of over 1% could be realized. A smaller pulsewidth was obtained for the negatively-chirped gratings when compared to the positively chirped gratings     

A Study of the Effect of Aluminium on the Mechanochemical Reduction of Hematite by Graphite

The effect of addition of small amounts of aluminium on mechano‐chemical reduction of hematite by graphite was studied. Various amounts of aluminium (0 to 10%) were added to a hematite‐graphite mixture, in which C/O ratio was 1:1. The hematite‐graphite‐aluminium mixtures were then subjected to ball milling followed by heating up reduction. The heating up reduction was carried out in Ar atmosphere, using TG‐DTA device. In TG‐DTA experiments, samples were heated by a constant heating rate of 10 °C/min from room temperature up to 1100 °C and maintained for 30 minutes at this temperature. To clarify the reactions which took place during milling and heating up reduction, the samples were subjected to XRD examinations. It was found that the heat generated during exothermic reaction of aluminothermic reduction of hematite promoted the endothermic reaction of carbothermic reduction. In the course of heating up reduction, the carbothermic reaction occurred just after aluminothermic reaction. Increasing of aluminum content from 0 to 10% in 2 hours ball milled samples decreased the temperature of carbothermic reaction from 1020 °C to about 860 °C. The further ball milling of the samples up to 5 and 10 hours, for the samples containing 10 and 5% aluminium respectively, caused the decrease of the temperature of aluminothermic and carbothermic reactions to around the melting point of aluminium.     

Modeling of bubble coalescence and disintegration in confined upward two-phase flow

This paper presents the modeling of bubble interaction mechanisms in the two-group interfacial area transport equation (IATE) for confined gas–liquid two-phase flow. The transport equation is applicable to bubbly, cap-turbulent, and churn-turbulent flow regimes. In the two-group IATE, bubbles are categorized into two groups: spherical/distorted bubbles as Group 1 and cap/slug/churn-turbulent bubbles as Group 2. Thus, two sets of equations are used to describe the generation and destruction rates of bubble number density, void fraction, and interfacial area concentration for the two groups of bubbles due to bubble expansion and compression, coalescence and disintegration, and phase change. Five major bubble interaction mechanisms are identified for the gas–liquid two-phase flow of interest, and are analytically modeled as the source/sink terms for the transport equation in the confined flow. These models include both intra-group and inter-group bubble interactions.     

Model evaluation of two-group interfacial area transport equation for confined upward flow

The bubble interaction mechanisms have been analytically modeled in the first paper of this series to provide mechanistic constitutive relations for the two-group interfacial area transport equation (IATE), which was proposed to dynamically solve the interfacial area concentration in the two-fluid model. This paper presents the evaluation approach and results of the two-group IATE based on available experimental data obtained in confined upward flow, namely, 11 data sets in or near bubbly flow and 13 sets in cap-turbulent and churn-turbulent flows. The two-group IATE is evaluated in steady-state, one-dimensional (1D) form. To account for the inter-group bubble transport, the void fraction transport equation for Group-2 bubbles is also used to predict the void fraction for Group-2 bubbles. Agreement between the data and the model predictions is reasonably good and the average relative difference for the total interfacial area concentration between the 24 data sets and predictions is within 7%. The model evaluation demonstrates the capability of the two-group IATE focused on the current confined flow to predict the interfacial area concentration over a wide range of flow regimes.     

Properties of novel diallyl phthalate resin modified with sulfur‐containing allyl ester compounds

Sulfur‐containing allyl ester, which reacts with diallyl phthalate (DAP) resin to have allyl groups, was synthesized by the reaction of allyl phthalic acid with bisphenol having sulfur atoms. The sulfur‐containing allyl ester compound was blended with DAP resin to improve the adhesive properties to copper. By modification with sulfur‐containing allyl ester compound, the T‐peel adhesive strength and the lap shear adhesive strength to copper was improved. In particular, the adhesive strength was greatly improved when the resin was modified with the allyl ester compound having a disulfide bond (?S?S?) (DADS). It is concluded that this result is due to the improvement of the interfacial adhesive strength because the sulfur atom was found to be located in the surface of the copper by Fourier transform infrared (FTIR) analysis. The glass transition temperature (T_g) and the thermal decomposition temperature (T_d) of the cured DAP resin modified with DADS slightly decreased with increasing concentration of DADS. The lowering of T_g is because the crosslinking density of the DAP resin modified with DADS is smaller than that of DAP resin. Moreover, from thermogravimetric analysis, the lowering of Td of the DAP resin modified with DADS is because DADS is likely to pyrolyze. © 2013 Society of Chemical Industry     

Production of thin graphite sheets for a high electrical conductivity film by the mechanical delamination of ternary graphite intercalation compounds

Herein we propose a production scheme for conductive films composed of thin graphite sheets with high crystallinity and polymeric resin. The crystalline graphite sheets were successfully produced from natural graphite powder by solution-phase synthesis of graphite intercalation compounds (GICs), following a wet planetary-ball milling under mild conditions. The shear forces in the milling pot lead to a peeling of graphite flakes. Taking into consideration the interlayer bonding force, the delamination should be preferentially done from the expanded GICs interlayer rather than intrinsic graphite one. Some composite films derived from the phenolic resin and flaky graphite sheets displayed much higher electrical conductivities compared to the film from the feed graphite particles. We also demonstrate the stage structure of synthetic GICs affected the film conductivity. The composite films made from exfoliated products of ground (around stage IV) GICs exhibited high electrical conductivity with a small amount of the graphite sheets.