Effects of azelastine on the level of serum interleukin-4 and soluble CD23 antigen in the treatment of nasal allergy

Research findings and various published studies point to interleukin 4 (IL-4) and CD23 antigen as instrumental in allergic reactions of allergy patients because these two substances are part of the main triggering mechanisms in cells producing IgE antibodies. In this study it was investigated whether the control of IL-4 and CD23 levels result in a decrease of the severity of allergic reactions. It is well known that azelastine hydrochloride (AZ, CAS 79307-93-0) suppresses symptoms of nasal allergy. The antiallergic activity of this drug includes the suppression of IgE antibody production, antigen-antibody reactions, liberation of mediators and mediator antagonism. One report states that the cytokines IL-2, IL-3, and IL-4 were suppressed by AZ in cultured cells. There have been no reports regarding cytokines in clinical treatment using AZ. Therefore, the effects of AZ treatment on IL-4, soluble CD23, and RAST (radioallergosorbent test) levels in the sera of allergic rhinitis patients were studied. The results show that the levels of IL-4 and soluble CD23 were significantly reduced by the administration of AZ over a 4-week period, especially in patients with "excellent" or "good" efficacy of therapy.     

3He Melting Pressure Measurements in High Magnetic Fields

Experimental methods and preliminary results of high-precision measurements of the ³ He melting curve in high magnetic fields have been described. The purpose of this work is twofold. One is to establish a reliable millikelvin temperature scale in high fields (T 10 mK, B 15 T), The other is to investigate a high field region of the magnetic phase diagram of solid ³ He by measuring the melting pressure down to temperatures below 1 mK. Besides the two superfluid transitions, the phase transition temperatures between the spin ordered solid and the paramagnetic solid, T _HFP , were determined at B = 12 and 10 T with good accuracy, which is an extension of previous measurements up to 8 T. The present T _HFP (B) line can not be scaled to that at a higher density with a single Grüneisen parameter, indicating a variation of density dependencies of the multiple-spin exchange interactions.     

Single-crystal growth and characterization of Cu2O and CuO

We have prepared a large number of crystals of cuprous oxide (Cu2O) by various procedures. Photoluminescence spectra of these crystals were studied to examine the concentration of defects, especially copper vacancy VCu to seek favourable conditions for growing Cu2O crystal. High-quality single crystals of Cu2O were prepared by the floating-zone melting method in air. Several synthetic crystals (specimens FA, FZ and GZ) and also a natural crystal were studied by X-ray analysis, inductively coupled plasma spectroscopy analysis, optical absorption, photoluminescence, photoconductivity and cyclotron resonance absorption, photoluminescence, photoconductivity and cyclotron resonance absorption to characterize their optical and electrical qualities. The best values of mobility and scattering time of photocarriers at T = 4.2 K are estimated to be h1.8 × 105 cm2 V–1 s–1 and h60 ps for positive holes, and 1.3 × 105 cm2 V–1 s–1 and 70 ps for electrons in Cu2O. Further, we report preliminary experimental results on transport property of crystals also of cupric oxide (CuO) purified by the floating-zone melting method.     

Thermodynamics of calcium and oxygen in molten titanium and titanium-aluminum alloy

The deoxidation equilibrium of molten titanium and titanium-aluminum alloys saturated with solid CaO has been measured in the temperature range from 1823 to 2023 K. The equilibrium constant of reaction CaO (s)=Ca (mass pct in Ti,Ti-Al)+O (mass pct in Ti,Ti-Al) and the interaction parameter between calcium and oxygen were determined for Ti, TiAl, and TiAl₃. The standard Gibbs energy of reaction for TiAl was obtained as follows: $$\Delta G^\circ = 279,000 - 103TJ/mol$$ The possibilities for the deoxidation of titanium and titanium-aluminum alloys by using calcium-based fluxes are discussed.     

Effect of temperature on humido-sensitive conducting polymer actuators

Temperature dependence of water vapor sorption and electro-active polymer actuating behavior of free-standing films made of poly(3,4-ethylenedioxythiophene) doped with poly(4-styrenesulfonate) (PEDOT/PSS) was investigated by means of sorption isotherm and electromechanical analyses. The non-porous PEDOT/PSS film, having a specific surface area of 0.13 m² g^?1, sorbed water vapor of 1080 cm³(STP) g^?1, corresponding to 87 wt%, at relative water vapor pressure of 0.95. A temperature rise from 25 °C to 40 °C lowered sorption degree, indicative of an exothermic process, where isosteric heat of sorption decreased with increasing water vapor sorption and the value reached 43.9 kJ mol^?1, being consistent with the heat of water condensation (44 kJ mol^?1). Upon application of 10 V, the film underwent contraction of 2.46% at 5 °C caused by desorption of water vapor due to Joule heating, which slightly decreased to 2.10% at 45 °C. The speed of contraction was one order of magnitude faster than that of expansion and less dependent on the temperature since water vapor sorbed in the film were forced to desorb by Joule heating. In contrast, the higher the temperature the faster the film expansion because diffusion coefficient increased as the temperature became higher.     

A biped static balance control and torque pattern learning under unknown periodic external forces

This paper addresses a biped balancing task in which an unknown external force is exerted, using the so-called ‘ankle strategy’ model. When an external force is periodic, a human adaptively maintains the balance, next learns how much force should be produced at the ankle joint from its repeatability, and finally memorized it as a motion pattern. To acquire motion patterns with balancing, we propose a control and learning method: as the control method, we adopt ground reaction force feedback to cope with an uncertain external force, while, as the learning method, we introduce a motion pattern generator that memorizes the torque pattern of the ankle joint by use of Fourier series expansion. In this learning process, the period estimation of the external force is crucial; this estimation is achieved based on local autocorrelation of joint trajectories. Computer simulations and robot experiments show effective control and learning results with respect to unknown periodic external forces.     

Semi-autonomous serially connected multi-crawler robot for search and rescue

In this paper, we develop a semi-autonomous serially connected multi-crawler robot for search and rescue. In large-scale disasters, such as earthquakes and tornadoes, the application of rescue robots to search for survivors under rubble would be beneficial. Snake-like robots (robots composed of serially connected units) are an effective candidate for such robots. Their long body enables them to overcome obstacles, and they can move into narrow spaces because of their thin shape. However, conventional snake-like robots have significant problems with operability. The numerous degrees of freedom of their bodies require complex operation to overcome obstacles, and training is required for the operators. Thus, survivors or community members cannot operate conventional robots to search for victims, despite the availability of such rescue robots. Here, we address this problem and develop a semi-autonomous serially connected multi-crawler robot designed for non-trained operators, such as community members or rescued survivors. It can be controlled easily by a conventional two-channel user interface with levers for turning and straight line motion. To demonstrate the effectiveness of our proposed mechanism, a prototype robot was developed and experiments were conducted. The results confirm that the proposed robot had both higher operability and higher mobility than conventional robots.     

Parameterizing cut sets in a graph by the number of their components

For a connected graph G=(V,E), a subset U⊆V is a disconnected cut if U disconnects G and the subgraph G[U] induced by U is disconnected as well. A cut U is a k-cut if G[U] contains exactly k(≥1) components. More specifically, a k-cut U is a (k,?)-cut if V?U induces a subgraph with exactly ?(≥2) components. The Disconnected Cut problem is to test whether a graph has a disconnected cut and is known to be NP-complete. The problems k-Cut and (k,?)-Cut are to test whether a graph has a k-cut or (k,?)-cut, respectively. By pinpointing a close relationship to graph contractibility problems we show that (k,?)-Cut is in P for k=1 and any fixed constant ?≥2, while it is NP-complete for any fixed pair k,?≥2. We then prove that k-Cut is in P for k=1 and NP-complete for any fixed k≥2. On the other hand, for every fixed integer g≥0, we present an FPT algorithm that solves (k,?)-Cut on graphs of Euler genus at most g when parameterized by k+?. By modifying this algorithm we can also show that k-Cut is in FPT for this graph class when parameterized by k. Finally, we show that Disconnected Cut is solvable in polynomial time for minor-closed classes of graphs excluding some apex graph.     

Editorial

Higher-Order and Symbolic Computation -     

An Estimation of Complexity and Computational Costs for Vertical Block-Cyclic Distributed Parallel LU Factorization

The Vertical Block–cyclic Distributed Parallel LU Factorization Method (VBPLU) is effectively processed on a distributed memory parallel computer. VBPLU is based on the two techniques, the block algorithm and the aggregation of communications. Since startup time dominates the data communication and the aggregation reduces communication isssues, the total performance has been much improved. Furthermore this method uses long vectors so that it is also advantageous on vector processors. In this paper, we have constructed a modeling of VBPLU using a simplified LogGP model with analytical formulae, and estimated accurately the computational cost taking into account load distributions caused by data layout and process mapping. Some knowledge for optimization of block algorithm has been obtained. Our estimations have been verified through numerical experiments on three different distributed memory parallel computers.