Balanced corpus of contemporary written Japanese

The balanced corpus of contemporary written Japanese (BCCWJ) is Japan’s first 100 million words balanced corpus. It consists of three subcorpora (publication subcorpus, library subcorpus, and special-purpose subcorpus) and covers a wide range of text registers including books in general, magazines, newspapers, governmental white papers, best-selling books, an internet bulletin-board, a blog, school textbooks, minutes of the national diet, publicity newsletters of local governments, laws, and poetry verses. A random sampling technique is utilized whenever possible in order to maximize the representativeness of the corpus. The corpus is annotated in terms of dual POS analysis, document structure, and bibliographical information. The BCCWJ is currently accessible in three different ways including Chunagon a web-based interface to the dual POS analysis data. Lastly, results of some pilot evaluation of the corpus with respect to the textual diversity are reported. The analyses include POS distribution, word-class distribution, entropy of orthography, sentence length, and variation of the adjective predicate. High textual diversity is observed in all these analyses.     

Phase separation behavior and morphology development of phenolic resin/PMMA/hexamethylenetetrarnine blends

Summary In order to obtain materials with nanopores which will be applicable for many fields, the structures of the cured blends of phenolic resin (PhN), poly(methyl methacrylate) (PMMA) and curing agent were studied. After PMMA was extracted from cured blends, the structures of cured phenolic resins were observed with SEM. As a results, it was found that nanosized continuous pore structures were formed in extremely wide composition region if curing temperature was high.     

Viscoelastic characterization of moderately concentrated polystyrene solutions by dynamic light scattering

The dynamic light scattering measurements were performed for moderately concentrated entangled solutions of atactic polystyrene in benzene (BZ) at 25.0 °C, in cyclohexane (CH) at 34.5 °C (Θ), and in diethyl malonate (DEM) at 35.0 °C (Θ) to characterize their viscoelastic properties. The results have shown that while the mutual diffusion coefficient D increases in the BZ solutions and decreases in the CH and DEM solutions with increasing polymer mass concentration c, the friction coefficient ζ for the three solutions increases with c showing the same power-law behavior irrespective of the weight-average molecular weight M_w and solvent quality. It has been found that the instantaneous longitudinal modulus L₀ for the CH and DEM solutions increases in proportion to c², obeying the familiar relation for the plateau value (4/3)G_N of the longitudinal stress relaxation modulus, but the L₀ values for these solutions are somewhat smaller than the values predicted from the relation. The terminal relaxation time τ_m for the two Θ solvent systems has been found to follow the power-law τ_m∝c^2.7, showing good correspondence to the relation established by rheological measurements.     

Adaptive interpolation scheme for NURBS curves with the integration of machining dynamics

This paper develops a comprehensive interpolation scheme for non-uniform rational B-spline (NURBS) curves, which does not only simultaneously meet the requirements of both constant feedrate and chord accuracy, but also real-time integrates machining dynamics in the interpolation stage. Although the existing work in this regard has realized the importance to simultaneously consider chord error and machining dynamics, none has really incorporated these in one complete interpolation scheme. In this paper, machining dynamics is considered for three aspects: sharp corners or feedrate sensitive corners on the curves, components with high frequencies or frequencies matching machine natural ones and high jerks. A look-ahead module was developed for detecting and adaptively adjusting the feedrate at the sharp corners. By Fast Fourier Transform (FFT) analysis with a moving window in the interpolation stage identified were some special frequency components such as those containing high frequencies or with frequencies matching machine natural ones. Then, the notch filtering or time spacing method was used to eliminate these components. To more completely reduce feedrate and acceleration fluctuations, the jerk-limited algorithm was also developed. Finally, the interpolated feedrate was further smoothened with B-spline fitting method and the NURBS curves were re-interpolated with the smoothened feedrate. During the interpolation, the chord error was repeatedly checked and confined in the prescribed tolerance. Two NURBS curves were used as examples to test the feasibility of the developed interpolation scheme.     

Reliability and mechanical durability tests of flexible OLED with ALD coating

To improve the reliability and mechanical durability of a flexible organic light‐emitting diode display, the entire flexible display is coated with an aluminum oxide film by atomic layer deposition (ALD). Because the step coverage of ALD is excellent, the AlO_x film was deposited not only on the front and back surfaces but also on the side surfaces of the display. A high‐temperature and high‐humidity preservation test, repetitive bending tests, and a pencil hardness test were conducted on the flexible display with ALD‐AlO_x coating. The display survived 500 h of a 65°C, 95% preservation test, endured a 100,000‐time repetitive bending test with a curvature radius of 4 mm, and was found to have a pencil hardness of 4H.     

Relationship between crystallinity and device characteristics of In‐Sn‐Zn oxide

We have reported that the transistors having the c‐axis‐aligned crystalline (CAAC) In‐Ga‐Zn oxide (IGZO) show good performance. Recently, In‐Sn‐Zn Oxide (ITZO) has attracted much attention because of its high electron mobility, as well as IGZO. However, it has been reported that ITZO field effect transistors (FET) tend to have positive Vth (normally‐on characteristics) and poor reliability compared with IGZO‐FETs. We have reported that high‐performance and high‐reliability OS‐FETs can be fabricated by using CAAC‐IGZO, which has high crystallinity and has no clear grain boundaries, as an active layer. Therefore, we have fabricated CAAC‐ITZO thin films to improve performance of ITZO‐FETs by using CAAC‐ITZO as an active layer. In addition, FETs employing CAAC‐ITZO have better characteristics and reliability than FETs using nano‐crystal ITZO. Furthermore, constant photocurrent method (CPM) measurement was carried out in order to estimate density of deep‐level defect states caused by oxygen vacancies in oxide semiconductors. The results show that CAAC‐ITZO has lower density of deep‐level defect states than nano‐crystal ITZO. We attribute the improvement in reliability of ITZO‐FETs to a decrease in deep‐level defect states of an ITZO active layer, as is the case with IGZO.     

Robotic Companions for Smart Space Interactions

In this piece we take a brief peek at the possible world of robotic companions. In such a world, robots are adopted as butlers in our homes, as baby watchers, as friends and in general as life companions. For example, Helen lives with a robotic companion named Schpuffy. In the morning, Schpuffy checks Helen's schedule and finds out she has an appointment with a neighbor to take a walk at 8:30 a.m. Schpuffy recognizes that it takes 30 minutes for her to prepare to go for a walk and wakes her up at 8:00 a.m. After she gets up, Schpuffy reminds Helen of her appointment at 8:30 a.m. While she gets dressed, Schpuffy lets her know that current weather is very cold and suggests that she wear thermal clothing. When she's about to leave the house, Schpuffy says "good bye" to her and locks the door as she leaves. Schpuffy hasn't gained majored acceptance. It's not in every home or even in a tiny fraction of homes. However, it's a bold new research that is taking shape with early commercial products already hitting the marketplace. It could soon be the chief appliance in your home, or the new interface technology for smart spaces.     

Compact cryogenic system with mechanical cryocoolers for antihydrogen synthesis

We have developed a compact cryogenic system which cools a vacuum chamber housing multi-ring trap electrodes (MRTs) of an antihydrogen synthesis trap using mechanical cryocoolers to achieve background pressure less than 10(-12) Torr. The vacuum chamber and the cryocoolers are thermally connected by copper strips of 99.9999% in purity. All components are installed within a diametric gap between the MRT of phi108 mm and a magnet bore of phi160 mm. An adjusting mechanism is prepared to align the MRT axis to the magnet axis. The vacuum chamber was successfully cooled down to 4.0 K after 14 h of cooling with heat load of 0.8 W.     

Quantitative structural analysis of twin boundary in alpha-Zn7Sb2O12 using HAADF STEM method

The structure and composition of the 1/4{110} twin boundary in alpha-Zn7Sb2O12 have been determined by using quantitative high-angle annular dark field scanning transmission electron microscopy (HAADF STEM) analysis. The noise in the experimental HAADF STEM images is reduced by using the maximum entropy method and average processing, and the parameters used in dynamical simulations are experimentally determined. From the analysis, it has been found that octahedral sites in the twin boundary slightly shift parallel to the [110] direction, and a reduction of the Sb concentration at the octahedral sites on the plane adjacent to the twin boundary was detected. The reduction was measured from three regions in the same twin boundary, and the Sb concentrations were 4 +/- 3, 8 +/- 3 and 19 +/-2 at% from 33 at%.     

Role of the reaction product in the solidification of Ag–Cu–Ti filler for brazing diamond

In order to reveal the mechanism for brazing diamond using Ag–Cu–Ti filler metal, thermoanalysis of elemental metals (silver and copper) either with added diamond micropowder or with added titanium carbide micropowder as nucleant were investigated to detect undercoolings. No undercooling for the solidification of silver with added titanium carbide powder was detected by the thermoanalytical curve, and also no undercooling for copper with added diamond powder was detected. These phenomena suggest that titanium carbide powder acts in the solidification of silver effectively as a nucleant and that diamond powder also acts in the solidification of copper as a nucleant. Fine-grained silver was observed in the micrograph of the silver added with titanium carbide powder. The results of the calculations on the planar disregistry, , and the dispersion energy, Edisp revealed that the Ag (100)–TiC(100) interface and Cu(100)–diamond (100) interface are more stable than the other combinations. The results of undercoolings of various specimens correlated with both planar disregistry and dispersion energy. According to these results, the titanium carbide reaction product is considered to play an important role in the solidification of silver. The brazing strength is considered to arise from the solidification of the brazing filler metal from the titanium carbide reaction product. © 1998 Chapman & Hall