Burning Rate Augmentation of BAMO Based Propellants

Thermal decomposition and the burning properties of BAMO based propellants with HMX or AN/HMX have been investigated. The heat generated by the azide binder decomposition initiated and accelerated the thermal decomposition of HMX and AN. Ammonium perchlorate (AP) and lead stearate with carbon black significantly altered the mechanisms of the thermal decomposition and the burning properties of the HMX based propellants. AP showed an increase in burning rate with a slight decrease in burning rate pressure exponent. The lead catalyst yielded high value of the burning rate with the lowest pressure exponent. The ammonium dichromate also influenced the mechanisms of the thermal decomposition and the burning properties of the AN/HMX samples. The combination of ammonium dichromate and copper chromite was the most effective on the burning rate augmentation of AN/HMX based propellants. AN sublimed and evaporated from the condensed phase and mainly reacted exothermically in the gas phase HMX and AN/HMX based propellants showed smokeless burning characteristics in the small rocket motor combustion tests.     

Guiding and blocking of highly charged ions through a single glass capillary

Highly charged ions produced in an electron beam ion trap, I^q+, q = 10-50, were transmitted through a tapered glass capillary having diameter of at the end. We found that for a particular beam current, there exists an optimum tilting angle of the capillary in which a steady output of ions is observed, while for smaller angles, the ion counts first rise, then gradually decay on a time scale of minutes. In the case of steady transmission, the charge state distribution is found to be slightly towards the lower side.     

Imaging dynamics of charge-auto-organisation in glass capillaries

Multiply charged ion beam transmission through insulating capillaries is today a very active field of research. Thanks to the work of several groups during the last five years, several features of this unexpected process have been evidenced. The open challenge is to understand and control the self-organized charging-up of the capillary walls, which leads finally to the ion transmission. Up to now, the specific charge distribution on the inner surface, as well as the dynamics of the build-up, are still to be understood. While capillaries usually studied are microscopic pore networks etched in different materials, our concern is in macroscopic single capillaries made of glass. With a length of several centimeters and a diameter of a few micrometers at the exit, these capillaries have nevertheless the same aspect ratio as the etched pores (length/diameter ≈ 100). One of the leading goals of this research on single capillaries is to produce multi-charged ion beams with diameters smaller than a micrometer (nano-beams). These glass capillaries offer the opportunity to be used as an ion funnel due to their amazing properties of guiding and focusing highly charged ion beams without altering neither their initial charge state nor the beam emittance (<10⁻³ π mm mrad). However, the understanding of the underlying process is not complete and relies on models assuming charge patches distributed along the capillary and which still need to be tested. We present the first observation imaging the dynamics of the charging-up process in single glass capillaries. During the build-up of the self-organized charge deposition on the capillary walls, the 230 keV Xe²³⁺ transmitted beam is deflected back and forth several times as the outgoing current increases. This is in agreement with the picture of charge patches created sequentially along the capillary and thus deflecting the beam until a stationary state is reached.     

The Association of Cholesterol Uptake and Synthesis with Histology and Genotype in Cortisol-Producing Adenoma (CPA)

Cortisol-producing adenoma (CPA) is composed of clear and compact cells. Clear cells are lipid abundant, and compact ones lipid poor but associated with higher production of steroid hormones. PRKACA mutation (PRKACA mt) in CPA patients was reported to be associated with more pronounced clinical manifestation of Cushing’s syndrome. In this study, we examined the association of histological features and genotypes with cholesterol uptake receptors and synthetic enzymes in 40 CPA cases, and with the quantitative results obtained by gas chromatography-mass spectrometry (GC-MS) analysis in 33 cases to explore their biological and clinical significance. Both cholesterol uptake receptors and synthetic enzymes were more abundant in compact cells. GC-MS analysis demonstrated that the percentage of compact cells was inversely correlated with the concentrations of cholesterol and cholesterol esters, and positively with the activity of cholesterol biosynthesis from cholesterol esters. In addition, hormone-sensitive lipase (HSL), which catalyzes cholesterol biosynthesis from cholesterol esters, tended to be more abundant in compact cells of PRKACA mt CPAs. These results demonstrated that both cholesterol uptake and biosynthesis were more pronounced in compact cells in CPA. In addition, more pronounced HSL expression in compact cells of PRKACA mt CPA could contribute to their more pronounced clinical manifestation.     

Characterization of electrical properties and photosensitivity of SnS thin films prepared by the electrochemical deposition method

Using the electrochemical deposition (ECD) method, we prepared tin sulfide thin films, which are suitable for the absorption layer in solar cells because of its bandgap energy (1 eV). We first optimized pulse-form biasing for ECD by characterizing deposited samples with scanning electron microscope, Auger electron spectroscopy and X-ray diffraction measurements. Then, we investigated the electrical properties of deposited SnS thin films and the properties of contacts with several different metals. Furthermore, we observed the photoconductivity of the films by means of photoelectrochemical measurements. From these results, we confirmed that the SnS thin films show p-type conduction.     

Traversable Region Estimation for Mobile Robots in an Outdoor Image

This paper describes a novel method to estimate appropriate traversable regions from an outdoor scene image. The traversable regions output by the proposed method reflect the common sense of people. For example, a candidate traversable region is “a paved road somewhat distant from the side ditch.” The input to the traversable region estimation is one color image. First, category is assigned to each pixel in the image. The categorization result is then input to the region estimator. Finally, the traversable region are estimated on the input image. An important aspect of this method is the application of two score functions in region estimation process. One score function places high value on categories selected as traversable paths by subjects. The other function places high value on categories that are not selected as traversable regions but are adjacent to categories with traversable paths. A combination of these two functions produces feasible estimation results. The effectiveness of the combined score functions was evaluated by experiments and a questionnaire.     

Calcium isotope separation by band chromatography using 18-crown-6-ether resin

To develop the ⁴⁸Ca enrichment process, a feasibility study on a band chromatography was made using 9 M HCl solution and crown ether resin synthesized in porous silica beads. Prior to the chromatographic experiments, distribution coefficients, Kd, of Ca²⁺ and Sr²⁺ were measured at different concentrations of these ionic species. The frontal boundary of the chromatography was made by a usual manner of the breakthrough mode of calcium feeding, and the rear boundary was made by introducing strontium as a following ion on the basis of the observed Kd values. It was confirmed that the heavy isotope ⁴⁸Ca was depleted in the rear boundary region, while ⁴⁸Ca was enriched in the front boundary region. The values of separation coefficient ε (= α – 1) in three chromatographic operations at different temperatures were observed as 2 × 10^?3 ~ 3 × 10^?3. The separation coefficients observed in the front boundary regions, where ⁴⁸Ca was enriched, agreed with those observed in the rear boundary regions, where ⁴⁰Ca was enriched.     

Wide-wavelength tunable lasers with 100 ghz fsr ring resonators

A widely tunable laser, consisting of a 100 GHz FSR triple-ring resonator and a semiconductor optical amplifier, is presented. The 100 GHz FSR ring resonator makes it possible to demonstrate 96 nm wavelength tuning with stable single-mode operation produced by a large threshold gain difference     

Role of unsaturated groups in glow discharge polymerization

The role of unsaturated groups of the starting compounds in glow discharge polymerization was investigated by elemental analysis, infrared spectroscopy, and ESCA. Tetramethylsilane (TMS), trimethylvinylsilane (TMVS), and ethyltrimethylsilane (ETMS) were used as starting materials. Glow discharge conditions (W/FM value meaning the rf power input per mass of the monomers) as well as a degree of the unsaturation of the starting materials had strong influences upon the polymer deposition rate and the elemental composition of the formed polymers. The C_1s and the Si_2p spectra showed that the chemical composition of these polymers was distinguished by either presence or absence of the unsaturated groups in the starting compounds rather than kind of the unsaturated groups. The polymer formation, when the monomers containing double and triple bonds were served, is proceeded not only through these unsaturated bonds but also through the cleavage between Si and C atoms.