Photolithographic patterning of organic photodetectors with a non-fluorinated photoresist system

We report on the fabrication of organic photodetectors (OPD) based on isolated islands of P3HT:PCBM. Pattern transfer to the active material was done with photolithography based on non-fluorinated solvents and the excessive organic semiconductor was removed with oxygen plasma reactive ion etching. The photoresist system used was found to be benign to the P3HT:PCBM layer as confirmed by absorption, thickness and roughness measurements. Current–voltage characteristics and external quantum efficiency (EQE) remained unchanged after the patterning process. It was demonstrated that it is possible to photolithographically pattern isolated islands with 200 μm edge length with the same dark current density (<10⁻⁵ A/cm² at −2 V bias voltage) and photocurrent density (>5 × 10⁻³ A/cm² at −2 V). Furthermore, concerning the solar cell performance, the patterned, small-area devices showed power conversion efficiency of 2.1% and fill-factor of 60%. Dark current was observed to depend on the size of the remaining semiconductor island, which was demonstrated on OPDs with diameter of 50 μm. The presented results show the feasibility of fabrication of isolated devices based on organic semiconductors patterned with non-fluorinated photolithography.     

Evidence of Oxygen Ferromagnetism in ZnO Based Materials

Discoveries of room‐temperature ferromagnetism (RTFM) in semiconductors hold great promise in future spintronics technologies. Unfortunately, this ferromagnetism remains poorly understood and the debate concerning the nature, carrier‐mediated versus defect‐mediated, of this ferromagnetism in semiconducting oxides is still open. Here, by using X‐ray absorption (XAS) and X‐ray magnetic circular dichroism (XMCD), it is demonstrated that the oxygen ions have a ferromagnetic response in different ZnO‐based compounds showing RTFM behavior: ZnO nanoparticles capped with organic molecules and ZnO/ZnS heterostructures. These results demonstrate the intrinsic occurrence of RTFM in these systems, and point out that it is not related to the metallic cation but it relays on the conduction band of the semiconductor.     

Advanced process device technology for 0.3-μm high-performancebipolar LSIs

A new method is developed for forming shallow emitter/bases, collectors, and graft bases suitable for high-performance 0.3-μm bipolar LSIs. Fabricated 0.5-μm U-SICOS (U-groove isolated sidewall base contact structure) transistors are 44 μm², and they have an isolation width of 2.0 μm, a minimum emitter width of 0.2 μm, a maximum cutoff frequency (f_T) of 50 GHz, and a minimum ECL gate delay time of 27 ps. The key points for fabricating high-performance 0.3-μm bipolar LSIs are the control of the graft base depth and the control of the interfacial layer between emitter poly-Si and single-Si. The importance of a tradeoff relation between f_T and base resistance is also discussed     

A 6-ns ECL 100 K I/O and 8-ns 3.3-V TTL I/O 4-Mb BiCMOS SRAM

The authors report a 4 M word×1 b/1 M word×4 b BiCMOS SRAM that can be metal mask programmed as either a 6-ns access time for an ECL 100 K I/O interface to an 8-ns access time for a 3.3-V TTL I/O interface. Die size is 18.87 mm×8.77 mm. Memory cell size is 5.8 μm×3.2 μm. In order to achieve such high-speed address access times the following technologies were developed: (1) a BiCMOS level converter that directly connects the ECL signal level to the CMOS level; (2) a high-speed BiCMOS circuit with low threshold voltage nMOSFETs; (3) a design method for determining the optimum number of decoder gate stages and the optimum size of gate transistors; (4) high-speed bipolar sensing circuits used at 3.3-V supply voltage; and (5) 0.55-μm BiCMOS process technology with a triple-well structure     

Comparison of measured value and calculated value of multiplestability in forced-flow cooled superconductors

The multiple stability observed exclusively in forced-flow cooled superconductors is numerically calculated, and the result is quantitatively compared with the value measured by J.W. Lue et al. (1980). The calculated and measured values agreed well in certain cases, and did not in others. Based on this comparison, the effects of the transient heat transfer coefficient and ohmic heat generation on the quantitative prediction of stability are discussed. From this comparison, it is learned that a precise understanding of the transient heat transfer coefficient is essential for reliable predictions, and also that the ordinary evaluation method of ohmic heat generation, which considers the flux-flow resistance, tends to overevaluate the situation     

A 1 ns, 1 W, 2.5 V, 32 Kb NTL-CMOS SRAM macro using a memory cellwith PMOS access transistors

While an ECL-CMOS SRAM can achieve both ultra high speed and high density, it consumes a lot of power and cannot be applied to low power supply voltage applications. This paper describes an NTL (Non Threshold Logic)-CMOS SRAM macro that consists of a PMOS access transistor CMOS memory cell, an NTL decoder with an on-chip voltage generator, and an automatic bit line signal voltage swing controller. A 32 Kb SRAM macro, which achieves a 1 ns access time at 2.5 V power supply and consumes a mere 1 W, has been developed on a 0.4 μm BiCMOS technology     

SIR Weighting Combining Diversity Using Matched Filter for Personal Communication Systems

We propose a novel SIR weighting postdetection combining diversity scheme with a new accurate SIR estimation method. The SIR is estimated and used as the weighting factor to compensate severe cochannel interference, one of the most important issues for PCS in terms of frequency utilization. Theimprovement offered by the proposal depends on SIR estimation accuracy.The SIR is, in this paper, estimated by a matched filter where theauto-correlation between received signal and unique word is calculated. Computer simulationsconfirm that the SIR of each diversity branch can be estimated easily andaccuratelyby the proposed SIR estimation method. The proposed diversity scheme achievesaperformance very close to that of ideal SINR weighting diversity underRayleighfading with severe cochannel interference. When average SIR = 10 dB and thenumber of branches(L)=4, the proposed diversity scheme lowers the requiredE_b/N₀ by 5 dB at BER = 1×10^-3compared to conventional maximal ratio combining diversity. This paper alsopresentsthe unique word length required to realize adequate performance, i.e.,robustnessagainst high-pitch Rayleigh fading.     

Optical frequency domain ranging by a frequency-shifted feedbacklaser

This paper describes the theoretical and experimental study of a new technique for optical frequency domain ranging (OFDR) by a frequency-shifted feedback (FSF) laser. In conventional OFDR, a frequency chirped single-mode laser is used as a light source to convert a distance into a beat frequency, and a tradeoff exists between measurement range and resolution. The FSF laser output consists of periodically generated chirped frequency components whose chirp rate is faster than 100 PHz/s (P=10¹⁵), By use of the FSF laser, the tradeoff is removed and long-distance high-resolution OFDR is realized In the experiment, a distance of 18.5 km was measured with a resolution of 20 mm