Key Constraints Analysis with Integrated Production Scheduler

Project delays due to late availabilities of resource and information (RI) prerequisites are one of the major threats to construction management. It is desirable to avoid such delays through better means of constraint management. With most contemporary planning methodologies and tools, it is generally difficult to represent many hidden flow constraints in a construction work plan. However, evaluating the impact of flow constraints is crucial in determining their criticalities, based on which the flow constraints may be prioritized and consequently resolved to minimize project delays. Due to the fact that limited resources are often shared among various trades, it may not be practical to resolve all the constraints simultaneously so that a tradeoff is inevitable, which suggests that management should focus on the most important ones termed as key constraints (i.e., those directly contributing to project delays). This paper presents a methodology that augments the traditional critical path method with RI availability constraints to analyze the causes of delays and locate the key constraints binding on project completion without ambiguity based on the principles of the theory of constraints. The methodology of key constraint analysis has been implemented with the integrated production scheduler, a constraint-based scheduling tool which facilitates the modeling, analysis, and management of constraints at the production planning level. An illustrative example is depicted to demonstrate how the proposed methodology works.     

Survival of Helicobacter pylori in milk and tap water

The survival capacity of Helicobacter pylori in artificially contaminated milk and tap water was investigated in the study. Helicobacter pylori could survive for up to 10 days in milk at 4 degrees C storage but only 4 days in tap water with a steady decrease of colony forming units. However, electron microscopy clearly showed that the non-culturable coccoid form was present in tap water which had been kept at 4 degrees C for 7 days. It is concluded that H. pylori may survive in tap water as well as in milk, with the implication that they may, thereby, act as a vehicle of transmission.     

Crystalline morphology and isothermal crystallization kinetics of poly(ethylene terephthalate)/clay nanocomposites

A poly(ethylene terephthalate) (PET)/montmorillonite clay nanocomposite was synthesized via in situ polymerization. Microscopic studies revealed that in an isothermal crystallization process, some crystallites in the nanocomposite initially were rod‐shaped and later exhibited three‐dimensional growth. The crystallites in the nanocomposite were irregularly shaped, rather than spherulitic, being interlocked together without clear boundaries, and they were much smaller than those of neat PET. With Avrami analysis, the isothermal crystallization kinetic parameters (the Avrami exponent and constant) were obtained. The rate constants for the nanocomposite demonstrated that clay could greatly increase the crystallization rate of PET. The results for the Avrami exponent were consistent with the observation of the rodlike crystallites in the PET/clay nanocomposite during the initial stage. Wide‐angle X‐ray scattering and Fourier transform infrared studies showed that, in comparison with neat PET, the crystal lattice parameters and crystallinity of the nanocomposite did not change significantly, whereas more defects may have been present in the crystalline regions of the nanocomposite because of the presence of the clay. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 1381–1388, 2004     

CONVECTIVE DRYING OF BANANA,GUAVA AND POTATO PIECES : EFFECT OF CYCLICAL VARIATIONS OF AIR TEMPERATURE ON DRYING KINETICS AND COLOR CHANGE

ABSTRACT

Pieces of banana, guava and potato were dried in a two-stage heat pump dryer capable of precise control of air humidity with predetermined cyclic variations of air temperature entering the drying chamber. The air temperature variations tested were : a cosine, a reversed cosine and three different square wave profiles with peak-to-valley variations from 20^°C to 40^°C. The cycle time was about 60 minutes with drying time of approximately 300 minutes. The drying samples were placed on trays in a thin layer. With appropriate choice of temperature-time variation, it is possible to reduce the overall color change while maintaining high drying rates.     

Impact of conditioning regimens and time on adhesion of a fiber post to root dentin using two resin cements

The aim of this study was to evaluate the influence of irrigation protocols on the bond strength of a glass fiber post bonded to dentin using two resin cements. In 200 root-filled teeth, post space was prepared and divided into five groups (n?=?40) based on the irrigation protocol: group 1 (3% sodium hypochlorite), group 2 (3% sodium hypochlorite – 17% Ethylene diamine tetraacetic acid), group 3 (a mixture of sodium hypochlorite and etidronic acid), group 4 (sodium hypochlorite – QMix), and group 5 (distilled water). Samples were subdivided into two subgroups (n?= 10) and fiber posts were cemented using subgroup A (Self-adhesive dual-cure resin cement; SEA) or B (dual-cure resin cement following an etch-and-rinse protocol, ER). Push-out bond strength was performed after 24 h and four months (n?= 10) and failure modes were categorized. Statistical analysis of data was carried out by appropriate analyses (p < 0.05). The irrigation protocol and the resin cement had a significant impact on push-out bond strength. Subgroup A group showed lower bond strength than B at both time periods when 3% NaOCl–17% EDTA and 1:1 mixture of 6% NaOCl + 18%EA protocols were used. Three percent NaOCl used in combination with 17% EDTA or QMix significantly decreased the push-out bond strength of ER at the end of four months (p < 0.05). In conclusion, dual-cure resin cements bonded with etch-and-rinse protocol showed highest bond strength when a mixture of NaOCl and etidronic acid was used as root canal irrigant. These values were differentially influenced by time.     

A simple dynamic circuit model for mos structure

A new simple circuit model for the MOS (metal-oxide-semiconductor) structure is presented. the model consists of three elements, namely, a linear capacitor, a non-linear capacitor and a C-dynamic element. Each component bears a simple relationship to the physical operating mechanism inside the MOS structure. the model can be used for simulating arbitrary MOS structure circuits under all operating conditions. In particular, it is capable of reproducing the structure's frequency-dependent small-signal characteristics. the model is also shown to exhibit many important and interesting dynamic behaviours under forward, reverse and sinusoidal operating modes. The model is based mainly upon the device's physical operating principles. But perhaps the most significant implication of this model is that it is the first ever to use a dynamic element to model the MOS structure from a physical approach.     

Comparison of ionic liquid,acid and alkali pretreatments for sugarcane bagasse enzymatic saccharification

BACKGROUND: Much attention has been given to applying ionic liquids (ILs) as an alternative pretreatment method for lignocellulosic biomass. This study aims to select the most suitable type of IL for pretreating sugarcane bagasse (SCB). The potential of ILs for pretreatment was evaluated and compared with conventional pretreatment media, acids and alkalis. The performance of the pretreatment media was evaluated based on the amount of reducing sugar produced from enzymatic saccharification, the energy requirement, and changes in the chemical structure and crystallinity index of the pretreated bagasse. RESULTS: 1‐ethyl‐3‐methylimidazolium acetate [EMIM]oAc was selected as the most suitable IL for SCB pretreatment. The optimum yields of reducing sugar obtained from [EMIM]oAc‐, alkali‐, and acid‐pretreated SCB were 69.5%, 92.8% and 41.3%, respectively. Although a lower yield of reducing sugar was obtained, [EMIM]oAc pretreatment required the least energy to pretreat 1 kg of SCB. Moreover, the percentage of SCB loss during [EMIM]oAc pretreatment was the lowest. [EMIM]oAc‐pretreated SCB also had the lowest crystallinity index (CI) with the most amorphous structure. CONCLUSION: [EMIM]oAc appears to be another option for pretreating SCB, and other issues such as the recyclability of [EMIM]oAc is worth investigating. Copyright © 2011 Society of Chemical Industry     

A switching-parameter algorithm for finding multiple solutions of nonlinear resistive circuits

An efficient algorithm for finding multiple solutions of a system of nonlinear algebraic equations is presented. This algorithm consists of solving an associated system of first order nonlinear differential equations whose independent variable may be switched from one variable to another during each integration step. The choice of the forward Euler predictor and Newton-Raphson corrector for integrating the differential equations leads to an extremely efficient method for implementing this switching-parameter algorithm. This approach involves only the recursive solution of an associated system of linear algebraic equations and can be easily programmed. The switching-parameter algorithm can also be used to derive the driving-point or transfer characteristic curve of multivalued resistive nonlinear networks.     

EFFECT OF OSMOTIC PRE-TREATMENT AND INFRARED RADIATION ON DRYING RATE AND COLOR CHANGES DURING DRYING OF POTATO AND PINEAPPLE

A combination of intermittent infrared and continuous convection heating was used to dry various osmotically pretreated sample of potato (in solutions of 10%, 20% and 30% NaCl) and pineapple (in solutions of 30%, 50%, 70% Brix). The effect of drying conditions on color changes of potato and pineapple was investigated. The Hunter color scale parameters (redness, yellowness and lightness) were measured to quantify the color changes. With appropriate choice of infrared intermittency as well as osmotic pretreatment, it is possible to reduce the overall color change while maintaining high drying rates. As expected, osmotic pretreatment resulted in a shift in the sorption isotherms for both products.     

Effect of ambient conditions on drying of herbs in solar greenhouse dryer with integrated heat pump

An even span solar greenhouse dryer was built and applied to dry Java tea (Orthosiphon aristatus) and Sabah snake grass (Clinacanthus nutans Lindau). Findings showed that the solar greenhouse dryer performs satisfactorily during clear weather except at nighttime and rainy day due to product rehydration which is heavily influenced by high relative humidity from ambient air. Integrating of heat pump into the solar greenhouse dryer has successfully reduced the room relative humidity by 10–15%. Also, heat pump has mitigated the product rehydration issue by maintaining room relative humidity at maximum of 65% throughout the drying period. The drying rate of Java tea was improved three to fourfold, i.e., from 0.004–0.008 to 0.018–0.025?g H₂O/g DM min, whereas 10% of drying time was saved for both Java tea leaf and Sabah snake grass leaf with the assistance of heat pump system. Meanwhile, the supply of dry air from the heat pump system with a magnitude of 0.25–0.50?m/s helps in enhancing the drying rate of the herbs as well as minimizing the nonuniformity of drying temperature and relative humidity inside the solar greenhouse dryer.