A 150 MHz 0.6 μm BiCMOS superscalar microprocessor

An implementation of the Pentium microprocessor architecture in 0.6 μm BiCMOS technology is described. Power dissipation is reduced and performance is enhanced over the previous generation. Processor features, implementation technology, and circuit techniques are discussed. An internal clock rate of 150 MHz is achieved at 3.7 V and -55°C     

The effects of impact ionization on the operation of neighboringdevices and circuits

This paper examines the detrimental effects of excess majority carriers and photons induced by impact ionization on the operation of neighboring pn junctions, bipolar transistors, MOS transistors, and circuits. The experimental results show that in addition to an increase in the substrate surface potential due to the excess majority carriers, photons can lower the barrier of a pn junction and, as a consequence, shift the Gummel plot of an npn bipolar transistor. As for the neighboring circuits, an example in which the speed of an NMOS ring oscillator is retarded by impact ionization in a neighboring NMOS transistor is presented     

Parasitic bipolar gain in fully depleted n-channel SOI MOSFET's

Fully depleted SOI MOSFET's include an inherent parasitic lateral bipolar structure with a floating base. We present here the first complete physically based explanation of the bipolar gain mechanism, and its dependence on bias and technological parameters. A simple, one-dimensional physical model, with no fitting parameters, is constructed, and is shown to agree well with simulations and measurements performed on a new type of SOI MOSFET structure. It is shown that parameters which affect the gain, such as SOI layer thickness, body doping concentration and gate and drain voltages, do so primarily by affecting the concentration of holes in the body region. Thus, current gain falls dramatically with increasing drain voltage due to the associated impact ionization driven increase in the hole concentration. Gummel plots of this parasitic bipolar indicate an apparent ideality factor of 0.5 for the hole current, due to the body hole concentration's dependence on drain voltage     

Effect of the polymer matrices on the dielectric behavior of a percolative high-k polymer composite for embedded capacitor applications

High dielectric constant (high-k) polymer composites are of great interest for embedded capacitor applications. Previously, we demonstrated that epoxy—aluminum composites are promising for embedded capacitor applications, because they have a high dielectric constant and a low dielectric loss due to the core—shell structure of the self-passivated aluminum particles. In this work, to further understand the dielectric behavior of aluminum composites, lower-loss polymers such as silicone, polyimide, polynorbornene, and benzocyclobutene were explored as matrices for the aluminum composites. It is found that the polymer matrices can significantly change the dielectric properties of the aluminum composites. A polymer matrix with a lower dielectric constant generally results in a lower dielectric constant of its aluminum composites. In this regard, polymer—aluminum composites have a similar dielectric characteristic as polymer—ceramic composites. Thermomechanical properties of aluminum composites were characterized by a thermomechanical analyzer.     

Fuzzy rule interpolation for multidimensional input spaces in determining d50c of hydrocyclones

Fuzzy rule-based systems have been very popular in many engineering applications. In mineral engineering, fuzzy rules are normally constructed using some fuzzy rule extraction techniques to establish the determination model in predicting the d50c of hydrocyclones. However, when generating fuzzy rules from the available information, it may result in a sparse fuzzy rule base. The use of more than one input variable is also common in hydrocyclone data analysis. This paper examines the application of fuzzy interpolation to resolve the problems using sparse fuzzy rule bases, and to perform analysis of fuzzy interpolation in multidimensional input spaces.     

Adhesion improvement of thermoplastic isotropically conductive adhesive

Generally, isotropically conductive adhesive formulations include epoxy resin as the polymeric matrix. Although epoxy has superior adhesion capability, its drawbacks include the tendency to absorb moisture and lack of reworkability (thermosetting polymer). In this study, a thermoplastic polymer with low moisture absorption (0.28 wt%), called polyarylene ether (PAE2), is used in isotropically conductive adhesive (ICA) formulation. Previous research work by Lu et al. showed that the moisture absorbed into epoxy caused galvanic corrosion, which result in the formation of metal oxide . By using a polymer with low moisture absorption, the amount of water present in ICA will be small, and the corrosion rate and formation of metal oxide can be reduced. However, previous measurements of contact resistance stability of PAE2-based ICA showed that they are not stable on all surface finishes. It was determined that for thermoplastic-based ICA, poor adhesion was the main mechanism for unstable contact resistance. Two methods of adhesion improvement will be evaluated in this work. The first is to use coupling agents and the second is to blend the thermoplastic with epoxy. Both methods showed promise in improving the contact resistance stability of polyarylene ether based ICA.     

Quadtree based colour quantisation image compression

A new colour quantisation and quadtree based image compression scheme is proposed. The features of the new scheme are that colour palette ordering and requantisation of the decoded image for palette-based monitor displays are not required. Thus, fast decoding and displaying can be achieved     

Interaction of soliton with sinusoidal wave packet

The interaction of a soliton of the Nonlinear Schrodinger Equation (NSE) with a weak sinusoidal wave packet is treated analytically. The second-order soliton solution containing the original soliton and a perturbing soliton is expanded to first order in the amplitude of the perturbating soliton. From this expansion, one obtains the associate function of Gordon (1992) and a continuous change of position and phase of the perturbed soliton. One finds that the soliton experiences a second-order change of velocity under the influence of the perturbation. This result is then used to derive the displacement due to a wave packet of general shape, which is also confirmed by computer simulation     

An antinociceptive effect of the intraperitoneal injection of nifedipine in rats, measured by tail-flick test

The tail-flick (TF) technique was used to assess the antinociceptive properties of nifedipine (NIF) given intraperitoneally (i.p.). First, the most suitable intensity of the noxious stimulus (temperature of the bulb) has been ascertained and used in the main study. Male Sprague-Dawley rats received NIF, dissolved in dimethyl sulfoxide (DMSO) at the doses of 0.0, 0.5, 2, 5, 10 and 15 mg/kg, or control with no injection. For the main study, the noxious stimulus was limited to 15 sec (cut-off time) and TF latencies were recorded up to 120 min. The antinociceptive response was expressed as the area under the curve for each rat and analyzed by one-way ANOVA. The antinociceptive response to the lower doses of NIF (0.5 and 2 mg/kg) did not differ from control (no injection) and DMSO alone. Significance was found at 5, 10 and 15 mg NIF with no difference among the doses. However, there was an increasing tendency of the mean values from 0.5 to 15 mg NIF resulting in a positive correlation. The correlation coefficient was 0.32483 (p = 0.015) and regression equation Y = (19.37) x dose + 1320. Our data suggest that spinal mechanisms are involved in NIF-induced antinociception.     

Tripartite hemolysin BL from Bacillus cereus. Hemolytic analysis of component interactions and a model for its characteristic paradoxical zone phenomenon

This study describes the use of the microdialysis technique to elucidate specific properties of the circadian pacemaking system in the hypothalamus, by measurement of melatonin production in the pineal gland. Melatonin has appeared to be a reliable marker of the pacemaker activity, which is influenced by the light/dark cycle. A phase shift in the light/dark cycle was applied to perturb the rhythm generating system. An 8-h phase advance resulted in the disappearance of melatonin production over two days, with basal levels comparable to normal daytime levels. In the subsequent return of rhythmic melatonin production, new clock characteristics could be revealed, due to the high time-resolution measurements of microdialysis. While half of the animals still did not show any rhythmicity, the other half of the animals regained rhythmicity with entrained onset of melatonin production, while the offset was variable and not stably entrained to lights on. Ten days after the shift, the system had completely recovered and all animals regained normal rhythmicity, in phase with the new light/dark cycle. The results are interpreted in terms of the two-oscillator model, with one oscillator reacting with a phase advance and the other with a phase delay to adapt to the phase shift.