Second law analysis of a fossil-geothermal hybrid power plant with thermodynamic optimization of geothermal preheater

There is an urgent and compelling need to develop innovative and more effective ways to integrate sustainable renewable energy solutions into the already existing systems or, better yet, create new systems that all together make use of renewable energy. This study aims to establish the optimum working conditions of a geothermal preheater in a power plant that makes use of both renewable and nonrenewable energy resources, where renewable (geothermal) energy is used to boost the power output in an environmentally sustainable way. Hence, two models, one, a simplified model of a Rankine cycle with single reheat and regeneration, and another, with a geothermal preheater substituting the low-pressure feedwater heater (LPFWH), were compared. The Engineering Equations Solver software was used to perform an analysis of the thermodynamic performance of the two models designed. An analysis was done to evaluate the energetic and exergetic effects of replacing a LPFWH with a geothermal preheater sourcing heat from a low temperature geothermal resource (100°C-160°C). Results from the thermodynamic analysis reveal that the hybridization boosts the power output by approximately 4% and it is superior in terms of the second law. Entropy generation minimization analysis was then employed to establish optimal working conditions of the hybrid system (ie, the geothermal preheater modeled as a downhole coaxial heat exchanger).     

Effect of nonlinear partial slip and thermal radiation on Oldroyd 8‐constant fluid in a channel with convective boundary condition

This investigation deals with the effects of nonlinear slip, nonlinear thermal radiation, and non‐Newtonian flow parameters on heat transfer of an incompressible magnetohydrodynamic steady flow of an Oldroyd 8‐constant fluid through two parallel infinite plates with convective cooling. The Rosseland approximation is adopted to simulate the radiation effects. Heat exchange with the surrounding at the surfaces is assumed to obey Newton's law of cooling. The system of coupled and highly nonlinear ordinary differential equations governing the model is solved numerically using the method of weighted residual. The combined effects of non‐Newtonian flow parameters, velocity slip parameter, magnetic field parameter, Biot numbers, thermal radiation on the fluid velocity, temperature distributions, skin friction, and the Nusselt number are presented graphically and discussed. It is found that the velocity slip has an increasing effect on the fluid velocity and temperature profiles. For larger values of the thermal radiation parameter, the temperature profile and the Nusselt number are noticed to be increased.     

Bioactive Compounds and Antioxidant Activity in Different Types of Berries

Berries, especially members of several families, such as Rosaceae (strawberry, raspberry, blackberry), and Ericaceae (blueberry, cranberry), belong to the best dietary sources of bioactive compounds (BAC). They have delicious taste and flavor, have economic importance, and because of the antioxidant properties of BAC, they are of great interest also for nutritionists and food technologists due to the opportunity to use BAC as functional foods ingredients. The bioactive compounds in berries contain mainly phenolic compounds (phenolic acids, flavonoids, such as anthocyanins and flavonols, and tannins) and ascorbic acid. These compounds, either individually or combined, are responsible for various health benefits of berries, such as prevention of inflammation disorders, cardiovascular diseases, or protective effects to lower the risk of various cancers. In this review bioactive compounds of commonly consumed berries are described, as well as the factors influencing their antioxidant capacity and their health benefits.     

A multi-nutrient supplement reduced markers of inflammation and improved physical performance in active individuals of middle to older age: a randomized, double-blind, placebo-controlled study

Background

Evidence suggests that folate deficiency may be causatively linked to depressive symptoms. However, little is known on the status of use of folic acid and vitamin supplements among people with mental disorders. This study examined the prevalence and the likelihood of use of folic acid or vitamin supplements among adults with depression and anxiety in comparison to those without these conditions.

Methods

Using data from 46, 119 participants (aged ≥ 18 years) in the 2006 Behavioral Risk Factor Surveillance System survey, we estimated the adjusted prevalence and odds ratios with 95% confidence intervals for taking folic acid and vitamin supplements among those with ever diagnosed depression (n = 8, 019), ever diagnosed anxiety (n = 5, 546) or elevated depressive symptoms (n = 3, 978, defined as having a depression severity score of ≥ 10 on the Patient Health Questionnaire-8 diagnostic algorithm).

Results

Overall, women were more likely than men to take folic acid supplements 1-4 times/day (50.2% versus 38.7%, P < 0.001) and vitamin supplements (62.5% versus 49.8%, P < 0.001). After multivariate adjustment, men with ever diagnosed depression or anxiety were 42% and 83%, respectively, more likely to take folic acid supplements < 1 time/day; 44% and 39%, respectively, more likely to take folic acid supplements 1-4 times/day; and 40% and 46%, respectively, more likely to take vitamin supplements compared to men without these conditions (P < 0.05 for all comparisons). Women with ever diagnosed depression were 13% more likely to take folic acid supplements 1-4 times/day and 15% more likely to take vitamin supplements than women without this condition (P < 0.05 for both comparisons). Use of folic acid and vitamin supplements did not differ significantly by elevated depressive symptoms in either sex.

Conclusion

The prevalence and the likelihood of taking folic acid and vitamin supplements varied substantially by a history of diagnosed depression among both men and women and by a history of diagnosed anxiety among men, but not by presence of elevated depressive symptoms in either sex.     

On the Use of Low-Pass Filters for Image Processing with Inverse Laplacian Models

A novel signal processing-oriented approach to solving problems involving inverse Laplacians is introduced. The Monogenic Signal is a powerful method of computing the phase of discrete signals in image data, however it is typically used with band-pass filters in the capacity of a feature detector. Substituting low-pass filters allows the Monogenic Signal to produce approximate solutions to the inverse Laplacian, with the added benefit of tunability and the generation of three equivariant properties (namely local energy, local phase and local orientation), which allow the development of powerful numerical solutions for a new set of problems. These principles are applied here in the context of biological cell segmentation from brightfield microscopy image data. The Monogenic Signal approach is used to generate reduced noise solutions to the Transport of Intensity Equation for optical phase recovery, and the resulting local phase and local orientation terms are combined in an iterative level set approach to accurately segment cell boundaries. Potential applications of this approach are discussed with respect to other fields.     

Maximum heat transfer density with rotating cylinders aligned in cross-flow

In this paper, we study the thermal behavior of an assembly of rotating cylinders aligned in a cross-flow. The objective is to maximize the heat transfer rate density of the assembly, i.e. the overall heat transfer dissipated per unit of volume, under fixed pressure drop. A numerical model is used to solve the governing equations. Two configurations are studied: i) the cylinders rotate in the same direction, and ii) consecutive cylinders rotate in opposite directions. The spacing between consecutive cylinders is optimized in each case. The second configuration proved to be the more efficient. In that configuration, it is also possible to optimize further the architecture by using a smaller spacing for the flow passage in which the flow is in the direction of the cylinders rotation, and larger spacing for the flow passage in which the cylinders oppose the main stream.     

Fitting the duct to the “body” of the convective flow

This paper is a proposal to design flow structures with maximal heat transfer rate per unit volume, by shaping each duct so that it fits optimally on the body of the convective flow. Optimally shaped ducts can be assembled into larger constructs. Two examples are given. In the first, a heat-generating strip is cooled inside a duct of rectangular cross-section. The duct geometry has two degrees of freedom, which can be selected so that the fixed duct volume packs a maximum of heat transfer rate. In the second example, the duct is a tube with isothermal internal surface, and the flow is sufficiently slow so that boundary layers do not form inside the duct. Once again, the duct aspect ratio can be optimized for maximal heat transfer rate density. Further improvements can be sought by endowing the duct geometry with more degrees of freedom.     

Pattern of dietary intake and consumption of street foods among Nigerian students

We have previously shown that the level of nerve growth factor (NGF) undergoes significant changes in the cerebrospinal fluid of patients with Multiple Sclerosis and in the brain of rats affected by Experimental Allergic Encephalomyelitis (EAE). The functional significance of the endogenous disregulation of NGF is not known, though recent studies seem to suggest that NGF might be associated with the ability of oligodendrocytes (OLs) to produce and/or utilise NGF. The aim of the present study was therefore to investigate whether NGF is involved in the development and differentiation of cells of the subventricular zone (SVz) which arbors undifferentiated cells that can give rise to OLs. The results show that NGF injected into the brain of developing rats and of rats affected by EAE is retrogradely transported from the SVz to the brain parenchyma. These findings suggest that during the early phase of brain development and during EAE, NGF, along with other growth factors, is implicated in growth and/or differentiation of OLs and in protecting neuronal injury. The possible functional role of NGF in these events has been discussed.     

Modelling the Texture of Paint

We present an extension to the WET & STICKY model. A method of modelling textured and shiny paint is described using bump mapping and standard illumination models. The qualities of the paint are used to supply input to the texture and lighting models. We demonstrate that a dynamic model of textured paint provides the user with valuable visual cluesfor the production of realistic painted images. We also propose further extensions which would allow the use of different lighting models for different paints, allowing for paint attributes which are unachievable either with traditional painting or with earlier forms of electronic painting.     

Application of coal fly ash to circumneutral mine waters for the removal of sulphates as gypsum and ettringite

South African power stations generate large amounts of highly alkaline fly ash (FA). This waste product has a serious impact on the environment. Acid mine drainage (AMD) is another environmental problem associated with mining. AMD has high heavy metal content in addition to high sulphate concentrations. Several studies have shown that 80–90% of sulphates can be removed when FA is co-disposed with AMD rich in Fe and Al. In South Africa, sources of contaminated mine waters, unlike AMD have circumneutral pH and much lower concentrations of Fe and Al, but rich in Ca and Mg. Treatment of such waters with FA resulted in no significant removal of sulphates when treated to pH less than 10. Subsequent treatment of circumneutral mine water to pH greater than 11 resulted in more than 60% sulphate removal. Treatment of circumneutral mine water to pH greater than 11 with FA followed by seeding with gypsum crystals and the addition of amorphous Al(OH)₃ resulted in removal of sulphate to levels below the Department of Water Affairs and Forestry (DWAF) water quality effluent limit (500 ppm).