Polarization analysis of surface-relief D-fiber Bragg gratings

Surface-relief fiber Bragg gratings exhibit substantially more polarization dependence than standard fiber Bragg gratings. Using D-fiber with different core orientations, surface-relief gratings are analyzed and fabricated to determine the polarization dependence. We show that the largest Bragg reflection occurs for the polarization state with a dominant TE field component parallel to the flat surface of the fiber. The polarization dependence is adjusted by changing the index of refraction of the surrounding media and by fabricating the surface relief grating using rotated core D-fiber.     

Effect of Small Amount of Manganese on the Interdiffusivities in Fe-Al Alloys

The ability to weld aluminum and steel sheets depends strongly on the formation of intermetallic phases; a process that is, in turn, controlled by the interdiffusion of iron and aluminum across the welded interface. Understanding the interdiffusion behavior, and how it is influenced by tertiary elements such as manganese, will allow for better prediction of the properties of the spot weld. Hence, interdiffusion coefficients and activation energies for interdiffusion were determined in the α solid solution and B2 intermetallic phases of Fe-Al alloys in the presence of 1.5-2 at.% manganese with pseudo-binary diffusion couples investigated at 900-1095 °C. The interdiffusion coefficients in α were found to increase in the presence of Mn at all temperatures compared with those reported in the binary Fe-Al alloys. The activation energies for interdiffusion in α are correspondingly lower than those in the binary Fe-Al alloys. The increase in the main interdiffusion coefficients in the presence of Mn indicates that diffusional interactions between Fe and Al are increased in the presence of Mn. The expected increase in diffusional interactions of Fe and Al are found to be consistent with the thermodynamic interactions between Fe and Al in the binary Fe-Al and ternary Fe-Al-Mn system as estimated from the literature. The presence of Mn is found to decrease the solubility of Al in the α solid solution, which, in turn, is expected to decrease the growth rate of the intermetallic at the interface between steel and aluminum.     

Memory Renaming: Fast, Early and Accurate Processing of Memory Communication

As processors continue to exploit more instruction level parallelism, greater demands are placed on the performance of the memory system. In this paper, we introduce a novel modification of the processor pipeline called memory renaming . Memory renaming applies register access techniques to load and store instructions to speed the processing of memory traffic. The approach works by accurately predicting memory communication early in the pipeline and then re - mapping the communication to fast physical registers. This work extends previous studies of data value and dependence speculation. When memory renaming is added to the processor pipeline, renaming can be applied to 30-50 % of all memory references, translating to an overall improvement in execution time of up to 14 % for current pipeline configurations. As store forward delay times grow larger, renaming support can lead to performance improvements of as much as 42 %. Furthermore, this improvement is seen across all memory segments—including the heap segment which has often been difficult to manage efficiently.     

Spatial controls for growth zone formation during the fission yeast cell cycle

Because of its regular shape, fission yeast is becoming an increasingly important organism in the study of cellular morphogenesis. Genetic experiments with mutants and drug treatment studies with wild-type cells have revealed the importance of microtubules in controlling new growth zone formation. It is believed that microtubules exert this role by delivering to cell ends a 'dynamic landmark' protein, tea1p, which promotes actin polymerization and growth zone formation. Here we present a simple model for fission yeast morphogenesis that describes the interplay between these two cytoskeletal elements. An essential assumption of the model is that actin polymerization is a self-reinforcing process: filamentous actin promotes its own formation from globular actin subunits via regulatory molecules. In our model, microtubules stimulate actin polymerization by delivering a component of the autocatalytic actin-assembly feedback loop (not by delivering a de novo inducer of actin polymerization). We show that the model captures all the characteristic features of polarized growth in fission yeast during normal mitotic cycles. We categorize the types of growth patterns that can exist in the model and show that they correspond to the major classes of morphogenetic mutants (monopolar, orb, banana and tea). Based on these results, we propose that fission yeast cells have specific size ranges in which they can exhibit two or more different stable patterns of growth.     

Financial appraisal of operational offshore wind energy projects

This paper investigates the commercial attractiveness of the nascent offshore wind energy industry from an asset owner's perspective. Two commercial scale operational projects are used as illustrative cases. Based upon historical empirical financial and performance data in conjunction with future spot market price scenarios, a discounted cash flow methodology has been applied to underpin the financial value over each life cycle of plant. The robustness of the results is strengthened by sensitizing key input parameters. The results suggest that project annualized returns range between 8% and 11% above prescribed costs of capital. A key finding is that the cost of capital can be more instrumental in achieving lower costs of energy than site selection itself.     

HYDROCARBON POTENTIAL OF THE LATE CRETACEOUS GONGILA AND FIKA FORMATIONS,BORNU (CHAD) BASIN,NE NIGERIA

The hydrocarbon potential of possible shale source rocks from the Late Cretaceous Gongila and Fika Formations of the Chad Basin of NE Nigeria is evaluated using an integration of organic geochemistry and palynofacies observations. Total organic carbon (TOC) values for about 170 cutting samples range between 0.5% and 1.5% and Rock-Eval hydrogen indices (HI) are below 100 mgHC/gTOC, suggesting that the shales are organically lean and contain Type III/IV kerogen. Amorphous organic matter (AOM) dominates the kerogen assemblage (typically >80%) although its fluorescence does not show a significant correlation with measured HI. Atomic H/C ratios of a subset of the samples indicate higher quality oil- to gas-prone organic matter (Type II-III kerogens) and exhibit a significant correlation with the fluorescence of AOM (r²= 0.86). Rock-Eval T_max calibrated against AOM fluorescence, biomarker and aromatic hydrocarbon maturity data suggests a transition from immature (<435°C) to mature (>435°C) in the Fika Formation and mature to post-mature (>470°C) in the Gongila Formation. The low TOC values in most of the shales samples limit their overall source rock potential. The immature to early mature upper part of the Fika Formation, in which about 10% of the samples have TOC values greater than 2.0%, has the best oil generating potential. Oil would have been generated if such intervals had become thermally mature. On the basis of the samples studied here, the basin has potential for mostly gaseous rather than liquid hydrocarbons.     

Registration of three‐dimensional scanning LiDAR sensors: An evaluation of model‐based and model‐free methods

Registration, also know as extrinsic calibration, is the process of determining the position and orientation of a sensor relative to a known frame of reference. For ranging sensors such as light detection and ranging (LiDAR) used in field robotic applications, the quality of the registration determines the utility of the range measurements. This paper makes two contributions. The first is the introduction of a new method, termed maximum sum of evidence (MSoE) for registering three‐dimensional LiDAR sensors to moving platforms. This method is shown to produce more accurate registration solutions than two leading methods for these sensors, the adaptive structure registration filter (ASRF) and Rényi quadratic entropy (RQE). The second contribution of the paper is to study the accuracy of the MSoE registration against these two other approaches. One of these, like the MSoE, requires a truth model of the environment. The other, a model‐free method, seeks the registration that minimizes the RQE of a compound point cloud. The main finding of this investigation is that while the model‐based methods prove more accurate than the model‐free approach, the results of all three methods are fit for their intended field robotic applications. This leads us to conclude that registration based on RQE is preferable in many, if not all, field robotic applications for reasons of convenience, since a truth model of the environment is not required.     

Optical disector counting in cryosections and vibratome sections underestimates particle numbers: effects of tissue quality

Optical disector counting is currently applied most often to cryosections, followed in frequency by resin-embedded tissues, paraffin, and vibratome sections. The preservation quality of these embedding options differs considerably; yet, the effect of tissue morphology on numerical estimates is unknown. We tested whether different embedding media significantly influence numerical estimates in optical disector counting, using the previously calibrated trochlear motor nucleus of hatchling chickens. Animals were perfusion-fixed with paraformaldehyde (PFA) only or in addition with glutaraldehyde (GA), or by Methacarn immersion fixation. Brains were prepared for paraffin, cryo-, vibratome- or celloidin sectioning. Complete penetration of the thionin stain was verified by z-axis analysis. Neuronal nuclei were counted using an unbiased counting rule, numbers were averaged for each group and compared by ANOVA. In paraffin sections, 906 +/- 12 (SEM) neurons were counted, similar to previous calibrated data series, and results obtained from fixation with Methacarn or PFA were statistically indistinguishable. In celloidin sections, 912 +/- 28 neurons were counted-not statistically different from paraffin. In cryosections, 812 +/- 12 neurons were counted (underestimate of 10.4%) when fixed with PFA only, but 867 +/- 17 neurons were counted when fixed with PFA and GA. Vibratome sections had the most serious aberration with 729 +/- 31 neurons-a deficit of 20%. Thus, our analysis shows that PFA-fixed cryosections and vibratome sections result in a substantial numerical deficit. The addition of GA to the PFA fixative significantly improved counts in cryosections. These results may explain, in part, the significant numerical differences reported from different labs and should help investigators select optimal conditions for quantitative morphological studies.