Attention, the intersection of cost and quality in health care

A method for assessing health care technology that models the demand on the clinician's attention exerted by patients' data (diagnostic and therapeutic) can provide a means for simultaneously reducing the cost and improving the quality of health care. The attentional demand exerted by patients' data can be measured by the amount of uncertainty in the data. Uncertainty can be expressed mathematically by the concept of entropy in information theory.     

Surface tension as a controlled variable in mechanical dishwashing

Using a continuous, in-line, nondestructive technique based on the maximum bubble pressure method, the surface tension of the wash water in a mechanical dishwashing machine has been monitored. This technique has enabled surface tension to be used as a controlled variable, providing feedback to regulate the amount of surfactant added. Assuming the mechanical force of the water spray is adequate to remove bound soil from the dish surface, the food soil may be titrated against surfactant, providing an indirect indication as to when the dishes are clean. This technique also could be applied to a recirculated wash solution for in-place cleaning.     

Low-loss three-phase frequency conversion using a TDM-PWM technique

A strategy for the realisation of a product-modulation frequency conversion technique is presented. For maximum efficiency and spectral purity, a pulse-width modulation (PWM) circuit is used. The addition of pulse-width-modulated signals from the three input phases to each of the three output phases is accomplished by time-division multiplexing (TDM). The need for the product modulator to accommodate multiplication by negative numbers is eliminated by a modification to the basic equations.     

Subreflector shaping to improve multiple-beam performance of a Cassegrain antenna

A method of designing multiple-beam antennas based on shaping the subreflector of an offset Cassegrain antenna is described. It is applied to a compact system having a diameter of 300? that is required to produce beams up to 4-6°either side of boresight. The performance is shown to be only slightly less than that obtainable by also shaping the main reflector, indicating that efficient multiple-satellite-access antennas can be designed without specially shaped main reflectors.     

High-resolution electron microscopy of the twinning and intergrowth in Ca4Al6SO16 and Ca3SrAl6SO16

The microstructures of unhydrated calcium aluminosulphate Ca₄Al₆SO₁₆ and Ca₃SrAl₆SO₁₆ have been studied by high-resolution electron microscopy (HREM). The results showed that twinning and twinned slabs could be introduced taking the [1 1 2] direction as the twin axis so that it seems to be coincident with the law of twinning formed in body-centred cubic structures. A previously reported superlattice with a repeat period twice that of the fundamental structure along the 〈1 1 0〉 direction has also been found in both matrix and twin variants. The close intergrowth of Ca₃SrAl₆SO₁₆ and another phase, possibly Sr₃Al₂O₆ existing as an inclusion between these two twin variants, was determined and clearly revealed by electron diffraction and HREM images. The coherent interphase boundaries and orientation relationship between them can also be deduced.     

Stress intensities in elastic-plastic plane-stress fields by caustics

Summary The experimental method of reflected causties was extended in this paper for the study of the strength of the plastic singularity and the respective plastic stress intensity factor at the tip of a mode-I crack in an elastic-strain hardening material. The elastic-plastic field around the crack tip was defined by means of the singular plastic solutions of Hutchinson, Rice and Rosengren (HRR-asymptotic field) which gives satisfactory results for small scale yielding types of deformation. The initial curve, generating the caustic by reflection from the front face of the deformed specimen lying well within the plastic zone, was accurately determined by considering the contribution of the elastic and plastic components of stresses and strains within the plastic zone.Results with experiments executed on steel specimens single-edge notched with various values of the hardening exponentn coincided with the form and shape of the theoretically derived caustics thus confirming the validity of the developed theory. The values of the plastic stress intensity factor thus derived corroborated the already existing results from previous experiments.     

Low-loss athermal silica-based lattice-form interleave filter with silicone-filled grooves

We describe a low-loss athermal silica-based interleave filter with a lattice-form structure. We athermalize the filter by using a silicone-filled groove formed in each delay line and we employ a low-loss design to reduce the accumulated groove excess loss in the multiple delay lines. By using these designs, we obtained a very low groove excess loss of 0.4 dB and achieved satisfactory temperature insensitivity and optical characteristics with this filter.     

Widely tunable bottom-emitting vertical-cavity SOAs

We present bottom-emitting tunable vertical-cavity semiconductor optical amplifiers (VCSOAs) with an effective wavelength tuning range of >20 nm. These devices utilize a high reflectivity micromechanically tunable Bragg mirror as the back reflector. Compared with our first generation tunable VCSOAs, the bottom-emitting devices exhibit a two-fold increase in the effective tuning range as well as a five-fold reduction in the required tuning voltage.     

Dyadic-based factorizations for regular paraunitary filterbanks and M-band orthogonal wavelets with structural vanishing moments

Paraunitary filterbanks (PUFBs) can be designed and implemented using either degree-one or order-one dyadic-based factorization. This work discusses how regularity of a desired degree is structurally imposed on such factorizations for any number of channels M /spl ges/ 2, without necessarily constraining the phase responses. The regular linear-phase PUFBs become a special case under the proposed framework. We show that the regularity conditions are conveniently expressed in terms of recently reported M-channel lifting structures, which allow for fast, reversible, and possibly multiplierless implementations in addition to improved design efficiency, as suggested by numerical experience. M-band orthonormal wavelets with structural vanishing moments are obtained by iterating the resulting regular PUFBs on the lowpass channel. Design examples are presented and evaluated using a transform-based image coder, and they are found to outperform previously reported designs.     

Investigation of Arrhenius acceleration factor for integrated circuit early life failure region with several failure mechanisms

Use of the Arrhenius equation for analysis of burn-in and life test data has been called into question in recent years. Validity of the Arrhenius activation energy is asserted to be restricted to only one failure mechanism. Therefore, if multiple failure mechanisms apply to an integrated circuit type, the temperature acceleration factor must be complex. In this study a model is constructed using the Weibull distribution for the failure rate applicable when there are multiple failure mechanisms. In this model a different Arrhenius activation energy corresponds to each failure mechanism. It is shown that under conditions expected to be valid for most integrated circuits, an empirical effective Arrhenius activation energy can be computed that is valid for life test data taken under typical conditions to better than 10%. This provides some justification for the continued usage of a simple Arrhenius equation as an empirical model to analyze life test data.