The beneficial effect of small amount of water in the ambient temperature atom transfer radical homo and block co-polymerization of methacrylates

ATRP of several methacrylates viz. methyl methacrylate (MMA), ethyl methacrylate (EMA), n-butyl methacrylate (nBMA), t-butyl methacrylate (tBMA), benzyl methacrylate (BzMA) and (N,N-dimethylamino)ethyl methacrylate (DMAEMA) has been studied in neat as well as aqueous (up to 12 vol% water) acetone at 35 °C using CuCl/bipyridine (bpy) catalyst and ethyl 2-bromoisobutyrate as the initiator. Addition of water significantly enhances the rate of polymerization without losing control. Unlike CuCl/bpy the CuBr/bpy catalyst gives poor control which is attributed to the lower solubility and consequent heterogeneity in the latter case. Of the other ligands used with the CuCl catalyst viz. o-phenanthroline (o-phen), 1,1,4,7,7-pentamethyldiethylenetriamine (PMDETA), 1,1,4,7,10,10-hexamethyltriethylenetetramine (HMTETA), Me₆TREN only o-phen offers reasonably good control. The CuCl/bpy catalyst system has been used also in preparing some di- and tri-block copolymers with reasonably low polydispersity index (PDI) at ambient temperature (35 °C) using aqueous acetone as the solvent. The following block copolymers have been prepared PMMA-tBMA, PMMA-b-tBMA-b-MMA, PMMA-DMAEMA, by this method.     

Highly selective sulfonated poly(vinylidene fluoride‐co‐hexafluoropropylene)/poly(ether sulfone) blend proton exchange membranes for direct methanol fuel cells

Proton exchange membranes (PEMs) based on blends of poly(ether sulfone) (PES) and sulfonated poly(vinylidene fluoride‐co‐hexafluoropropylene) (sPVdF‐co‐HFP) were prepared successfully. Fabricated blend membranes showed favorable PEM characteristics such as reduced methanol permeability, high selectivity, and improved mechanical integrity. Additionally, these membranes afford comparable proton conductivity, good oxidative stability, moderate ion exchange capacity, and reasonable water uptake. To appraise PEM performance, blend membranes were characterized using techniques such as Fourier transform infrared spectroscopy, AC impedance spectroscopy; atomic force microscopy, and thermogravimetry. Addition of hydrophobic PES confines the swelling of the PEM and increases the ultimate tensile strength of the membrane. Proton conductivities of the blend membranes are about 10^?3 S cm^?1. Methanol permeability of 1.22 × 10^?7cm² s^?1 exhibited by the sPVdF‐co‐HFP/PES10 blend membrane is much lower than that of Nafion‐117. AFM studies divulged that the sPVdF‐co‐HFP/PES blend membranes have nodule like structure, which confirms the presence of hydrophilic domain. The observed results demonstrated that the sPVdF‐co‐HFP/PES blend membranes have promise for possible usage as a PEM in direct methanol fuel cells. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43907.     

Study of nitric acid leachout characteristics from weak base anion exchanger to maintain a specified pH regime during Gd(NO3)3 removal from moderator system of 540 MWe PHWRs

Nitric acid leachout characteristics from weak base anion exchanger (WBA) have been experimentally evaluated as a function of total nitric acid loading at a given flow velocity. An empirical first order model is used to explain the column outlet behaviour. Based on the experimental evaluation, a column configuration of a strong acid cation exchanger (SAC) topped mixed bed of SAC and WBA followed by a 5% nitric acid loaded WBA as the bottom layer of the column has been used to remove Gd(NO₃)₃ from water while maintaining the column outlet pH in the range of 5.0–5.5.     

Effect of SBS and HDPH polymer on rheological properties of asphalt

The present work discusses the combined effect of High Density Polyethylene Homo polymer and Styrene-Butadiene-Styrene on properties of Viscosity Grade 30 asphalt commonly used in India. Six blends of binders were prepared using varying percentages of both polymers and were evaluated for rheological properties. Use of both polymers leads to higher viscosity, while blending with HDPH polymer only leads to marginal increase in viscosity when compared to unmodified binder. Comparison of dynamic modulus and phase angle master curves indicated, significant differences were found among master curves obtained with different aging conditions when compared to unaged condition especially at lower reduced frequencies.     

Natural convection in a cavity with undulated walls filled with water-based non-Newtonian power-law CuO–water nanofluid under the influence of the external magnetic field

Natural convection heat transfer in a square cavity (with wavy or plane wall) filled with non-Newtonian power-law nanofluid has been elucidated for several input parameters like Ra spanning from 10⁵ to 10⁶, power-law index (n) from 0.6 to 1.4, and volume fraction of CuO nanoparticles (?) from to 0 to 0.12. Effect of external magnetic field on heat transfer has been illustrated by varying the Ha from 0 to 90. In the present study, our main objective is to explore the effect of nanoparticles on heat transfer enhancement in non-Newtonian power-law fluid. It is found that the addition of nanoparticles (?) to shear thinning fluid enhances the heat transfer approximately 15% when ? increases from 0 to 0.12 for Ha less than 60 at all Ra. For a shear thickening fluid, the same thing happens for all Ha at any Ra. The average surface Nusselt number for a cavity with wavy wall is less than that of a plane wall for all cases which is not true for the case of local Nusselt number.     

A predictive model of the effects of genotypic,pre‐ and postharvest stages on barley β‐glucan levels

BACKGROUND: β‐Glucan is a bioactive component of cereal grains that has many potential uses and health‐promoting benefits. Recent research has focused on improving the nutritional value of food by increasing human exposure to β‐glucan. This study looks at the development of a farm‐level baseline model (including scenario analysis) to evaluate the impact of pre‐ and postharvest stages (including genotypic factors, environmental conditions, agronomic factors and storage) on β‐glucan levels in barley. Monte Carlo simulation techniques were employed to model various stages in pre‐ and postharvest processes and to simulate the factors influencing the level of β‐glucan content in both hulled barley (H_B) and hull‐less barley (H_LB) genotypes. RESULTS: The baseline model found that the mean simulated level of β‐glucan was 40.99 and 56.77 g kg^?1 for H_B and H_LB genotypes respectively. A sensitivity analysis highlighted that genotype was the most important parameter in determining the final β‐glucan content (correlation coefficients of 0.66 and 0.78 for H_B and H_LB respectively), more so than any of the agronomic factors analysed. The scenario analysis highlighted the importance of harvest date (scenario 2) and storage conditions (scenario 3), with a potential 32.6 and 32.7% decrease in β‐glucan (compared with the baseline model) if harvesting is carried out early during physiological maturity (i.e. at growth stage 92) and a potential 20.1 and 19.5% increase in β‐glucan for H_B and H_LB respectively if storage time is minimised. CONCLUSION: This study predicted the influence of genotypic, pre‐ and postharvest operations on β‐glucan content and thus allows strategies to be identified to influence β‐glucan content in barley products. Copyright © 2008 Society of Chemical Industry     

Rind of the rambutan, Nephelium lappaceum, a potential source of natural antioxidants

The rind of rambutan, which is normally discarded was found to contain extremely high antioxidant activity when assessed using several methods. Although having a yield of only 18%, the ethanolic rambutan rind extract had a total phenolic content of 762 ± 10 mg GAE/g extract, which is comparable to that of a commercial preparation of grape seed extract. Comparing the extract’s pro-oxidant capabilities with vitamin C, α-tocopherol, grape seed and green tea, the rind had the lowest pro-oxidant capacity. In addition, the extract at 100 μg/ml was seen to limit oxidant-induced cell death (DPPH at 50 μM) by apoptosis to an extent similar to that of grape seed. The extracts were not cytotoxic to normal mouse fibroblast cells or splenocytes while the powderised rind was seen to have heavy metals contents far below the permissible levels for nutraceuticals. Our study for the first time reveals the high phenolic content, low pro-oxidant capacity and strong antioxidant activity of the extract from rind of Nephelium lappaceum. This extract, either alone or in combination with other active principles, can be used in cosmetic, nutraceutical and pharmaceutical applications.