Corrosion-protective performance of nano polyaniline/ferrite dispersed alkyd coatings

The application of nanotechnology in the corrosion protection of metals has recently gained momentum. A polymer nanocomposite coating can effectively combine the benefits of organic polymers, such as elasticity and water resistance, to that of advanced inorganic materials, such as hardness and permeability. Environmental impact can also be improved by utilizing nanostructure particulates in coatings and eliminating the requirement of toxic solvents. Nanocomposites have also proven to be an effective alternative to phosphate-chromate pretreatment of metallic substrate, which is hazardous due to the presence of toxic hexavalent chromium. This article reports some of the preliminary investigations on the corrosion-resistance performance of soya oil alkyd, containing polyaniline/ferrite nanocomposite. The corrosion-protective performance was evaluated in terms of physico-mechanical properties, corrosion rate, and SEM studies. The polyaniline/ferrite nanocomposite coatings were found to show a far superior corrosion-resistance performance compared to that of a pure PANI/alkyd system.     

Characterization of Pheromone Blend for Grapevine Moth, Lobesia botrana by Using Flight Track Recording

The behavioral responses of Lobesia botrana males to calling females, pheromone gland extracts, and synthetic sex pheromones were recorded in a wind tunnel. Gland extracts and synthetic pheromones were released from a pheromone evaporator. The numbers of males reaching the source and their flight tracks in response to calling females and pheromone gland extracts were compared to those of synthetic blends. Upwind flights to natural sex pheromone were straighter and faster than to a three-component blend of (E)-7,(Z)-9-dodecadienyl acetate (E7,Z9–12:Ac), (E)-7,(Z)-9-dodecadien-1-ol (E7,Z9–12:OH), and (Z)-9-docecenyl acetate (Z9–12:Ac) (100:20:5). The optimum ratio of E7,Z9–12:OH and Z9–12:Ac to E7,Z9–12:Ac was found to be 5% and 1%, respectively. An additional seven compounds identified in the sex pheromone gland were investigated for their biological activity. Two unsaturated acetates, i.e., (E)-9-dodecenyl acetate (E9–12:Ac) and 11-dodecenyl acetate (11–12:Ac), increased the number of males reaching the source as well as straightness, linear velocity, and decreased the track angle of upwind flight. Optimum response was obtained by releasing 10 pg/min E7,Z9–12:Ac in a mixture with 0.5 pg/min E7,Z9–12:OH, 0.1 pg/min Z9–12:Ac, 0.1 pg/min E9– 12:Ac and 1 pg/min 11-12–Ac. The saturated acetates previously identified in the female glands were biologically inactive.     

Effectiveness of polypyrrole and polyaniline composites for the removal of lead salts from aqueous solution

The effect of polyaniline and polypyrrole composites and the influence of type and concentration of stabilizer, pH of solution, and type of adsorbent on lead salt removal from aqueous solution were studied. The results indicated that the extents of removal of lead in alkaline solution (pH = 10) were 99.95 and 99.23%, respectively, when polyaniline and Polyaniline/(sodium dodecylbenzenesulfonate) composite were used as adsorbents. The results were compared with those obtained by using cation exchangers such as Purolite and Amberjet, and the observations indicated that Purolite and Amberjet were the better lead removal agents. J. VINYL ADDIT. TECHNOL., 2010. © 2010 Society of Plastics Engineers     

Synthesis,characterization, and cell viability of bifunctional medical-grade polyurethane nanofiber: Functionalization by bone inducing and bacteria ablating materials

There is an extensive possibility of improving characteristics of fibers used in hard tissue engineering, being hydrophobic and less osteoconductive, resulting in the dynamic growth of new tissues. The current work focuses on the fabrication of nanofibers incorporated with titanium dioxide (TiO₂) ''as osteoconductive'' and silver (Ag) ''as self-healing'' nanoparticles (NPs). The incorporation of AgNO₃ by in situ method not only helped to impart the antibacterial activity but also changed the contact angle from 81 ± 03° in the case of pristine nanofibers to 74 ± 03°, 61 ± 03°, 50 ± 08°, and 39 ± 1.1°, in the composite scaffolds containing 0.01, 0.03, 0.05, and 0.07 M of Ag salts. The incubation in simulated body fluid at 37°C to induce mineralization on nanofiber scaffolds indicated Ca and P crystals' formation. The antibacterial activity showed significantly more toxicity toward E. coli (8.3 ± 0.9 mm) than S. aureus (1.2 ± 0.1 mm). Biocompatibility studies using MTT assay on the pre-osteoblasts showed that both TiO₂ and Ag NPs present in the nanofibers are non-toxic to the bone-like cells. However, results show that a higher concentration of Ag NPs (i.e., 0.07 M) is toxic to cells growing. Finally, all the results suggest that the nanofiber scaffolds have considerable scope for future bone tissue engineering materials.     

Suppression of TRPV1/TRPM8/P2Y Nociceptors by Withametelin via Downregulating MAPK Signaling in Mouse Model of Vincristine-Induced Neuropathic Pain

Vincristine (VCR) is a widely used chemotherapy drug that induced peripheral painful neuropathy. Yet, it still lacks an ideal therapeutic strategy. The transient receptor potential (TRP) channels, purinergic receptor (P2Y), and mitogen-activated protein kinase (MAPK) signaling play a crucial role in the pathogenesis of neuropathic pain. Withametelin (WMT), a potential Phytosteroid isolated from datura innoxa, exhibits remarkable neuroprotective properties. The present investigation was designed to explore the effect of withametelin on VCR-induced neuropathic pain and its underlying molecular mechanism. Initially, the neuroprotective potential of WMT was confirmed against hydrogen peroxide (H₂O₂)-induced PC12 cells. To develop potential candidates for neuropathic pain treatment, a VCR-induced neuropathic pain model was established. Vincristine (75 μg/kg) was administered intraperitoneally (i.p.) for 10 consecutive days (day 1–10) for the induction of neuropathic pain. Gabapentin (GBP) (60 mg/kg, i.p.) and withametelin (0.1 and 1 mg/kg i.p.) treatments were given after the completion of VCR injection on the 11th day up to 21 days. The results revealed that WMT significantly reduced VCR-induced pain hypersensitivity, including mechanical allodynia, cold allodynia, and thermal hyperalgesia. It reversed the VCR-induced histopathological changes in the brain, spinal cord, and sciatic nerve. It inhibited VCR-induced changes in the biochemical composition of the myelin sheath of the sciatic nerve. It markedly downregulated the expression levels of TRPV1 (transient receptor potential vanilloid 1); TRPM8 (Transient receptor potential melastatin 8); and P2Y nociceptors and MAPKs signaling, including ERK (Extracellular Signal-Regulated Kinase), JNK (c-Jun N-terminal kinase), and p-38 in the spinal cord. It suppressed apoptosis by regulating Bax (Bcl2-associated X-protein), Bcl-2 (B-cell-lymphoma-2), and Caspase-3 expression. It considerably attenuated inflammatory cytokines, oxidative stress, and genotoxicity. This study suggests that WMT treatment suppressed vincristine-induced neuropathic pain by targeting the TRPV1/TRPM8/P2Y nociceptors and MAPK signaling.     

Simulation and Optimization of Hydrogen Fueled Mobile Power Plant Based on Methylcyclohexane–Toluene–Hydrogen Cycle

Theoretical Foundations of Chemical Engineering - Increase in CO2 emissions from fossil fuels has threatened the future security of human race. The addition of a renewable and environment friendly...     

CuxNi1-xO nanostructures and their nanocomposites with reduced graphene oxide: Synthesis,characterization, and photocatalytic applications

NiO nanostructure was synthesized using a simple co-precipitation method and was embedded on reduced graphene oxide surface via ultrasonication. Structural investigations were made through X-ray diffraction (XRD) and functional groups were confirmed by Fourier transform infrared spectroscopy (FTIR). XRD analysis revealed the grain size reduction with doping. Fourier transform infrared spectroscopy confirmed the presence of metal-oxygen bond in pristine and doped NiO nanostructure as well as the presence of carbon containing groups. Scanning electron microscopy (SEM) indicated that the particle size decreased when NiO nanostructure was doped with copper. BET surface area was found to increase almost up to 43 m²/g for Cu doped NiO nanostructure/rGO composite. Current-voltage measurements were performed using two probe method. UV–Visible spectroscopic profiles showed the blue and red shift for Cu doped NiO nanostructure and Cu doped NiO Nanostructure/rGO composite respectively. Rate constant for Cu doped NiO nanostructure/rGO composite found to increase 4.4 times than pristine NiO nanostructure.     

Corrosion inhibition of carbon steel in hydrochloric acid by cationic arylthiophenes as new eco-friendly inhibitors: Experimental and quantum chemical study

This study describes the adsorption behavior of three arylthiophene derivatives namely: 2-(4-amidino-3-fluorophenyl)-5-[4-methoxy phenyl] thiophene dihydrochloride salt (MA-1217), 2-(4-amidinophenyl)-5-[4-chlorophenyl] thiophene dihydrochloride salt (MA-1316) and 2-(4-amidino-3-fluorophenyl)-5-[4-chlorophenyl]thiophene dihydrochloride salt (MA-1312) at C-steel in 1.0 mol·L^-1 HCl interface using experimental and theoretical studies. Electrochemical and mass loss measurements showed that the inhibition efficiency (IE) of the arylthiophene derivatives increases with increasing concentrations and exhibited maximum efficiency 89% at 21×10^-6 mol·L^-1 (MA-1217) by mass loss method. The investigated arylthiophene derivatives obey the Langmuir adsorption isotherm. From polarization studies the arylthiophene derivatives act as mixed-type inhibitors. Surface analysis were carried out and discussed. The mode of orientation and adsorption of inhibitor molecules on C-steel surface was studied using molecular dynamics (MD) simulations. Quantum chemical parameters as well as the radial distribution function indices and binding energies confirm the experimental results.     

Silicon Mitigates Drought Stress in Wheat (Triticum aestivum L.) Through Improving Photosynthetic Pigments,Biochemical and Yield Characters

Silicon - Feeling prone to stress differs with plant production stage, water scarcity near commencement of grain filling phase has a significant reduced grain yield through fewer endosperm and sink...     

Prevalence and characterization of Salmonella enterica serovar Weltevreden from imported seafood

During 2001-2005, 210 Salmonella enterica strains were isolated from seafood samples imported into US. Strains of S. enterica serovar Weltevreden were the most predominantly found among the 64 different serovars isolated. A total of 37 Salmonella Weltevreden isolates were characterized by pulsed-field gel electrophoresis (PFGE), plasmid profiles and antibiotic susceptibility to assess genetic diversity. Our results showed a low frequency of antibiotic resistance; 35 of the 37 isolates were sensitive to ampicillin, tetracycline, chloramphenicol, gentamicin, sulfisoxazole, streptomycin and kanamycin. Only two isolates, from samples originating in the Philippines and India, showed resistance to ampicillin and tetracycline and to streptomycin, sulfisoxazole and tetracycline, respectively. Of the 37 isolates, two isolates did not carry any plasmid and 35 isolates harbored several small and mega-plasmids. These isolates were differentiated into 10 distinct types based on plasmid profiles. Four different PFGE clusters were obtained with a genetic similarity of 66-76%. Four groups of isolates (formed by two or three isolates each) showed 100% similarity in the PFGE profiles. One of these groups included strains isolated in Vietnam in 2003, 2004 and 2005 from fish and shrimp. The other groups included strains isolated in Vietnam, Indonesia and Thailand in 2000, 2004 and 2005 from snail, shrimp and fish. Our findings show genetic diversity and temporal persistence of S. enterica serovar Weltevreden in recently monitored seafood imports.