Rapid synthesis of palm-based monoacylglycerols

Rapid synthesis of high-purity MAG from refined, bleached, and deodorized palm stearin (RBDPS) via chemical glycerolysis in the presence of pyridine was developed to obviate the conventional molecular distillation in the production of pure MAG. The optimal reaction for the sodium methoxide-catalyzed glycerolyis of RBDPS was recorded at 110°C using a 3 wt% catalyst concentration based on the weight of RBDPS, with an RBDPS/glycerol ratio of 1∶2 and an RBDPS/pyridine ratio of 1∶4. High yields of over 99% were achieved rapidly in 15 min, and increases in DAG and FFA were observed after a prolonged reaction time.     

Ring opening polymerization of 2,5-dihydro-2,5-dimethoxyfuran by electrochemical initiation

Summary 2,5-Dihydro-2,5-dimethoxyfuran (DHMF) was polymerized via constant current electrolysis (CCE), in CH₃CN-NaClO₄ solvent-electrolyte couple. Poly(DHMF) was obtained from the anolyte. The effect of current density, temperature, monomer and electrolyte concentrations on the polymer yield have been examined. The apparent activation energy for CCE of DHMF was found to be 37.2 kj/mol. The FTIR and ¹H-NMR analyses show that DHMF polymerizes by a ring opening. Molecular weight of poly(DHMF) was found by using cryoscopy.     

Numerical and experimental study on the biofiltration of toluene vapor

We have solved both steady state and transient problems on the biofiltration of toluene vapor. The effect of inlet toluene concentration and inlet gas-flow rate on the removal rate of toluene and the elimination capacity of a lab-scale biofilter has been investigated. In this study, the effectiveness factor was a function of pollutant concentration. The dynamic solutions show good agreement with experimental results. At an inlet toluene concentration of 100 ppm, the diffusion of toluene into biofilm was obviously a rate determining step. Above 200 ppm, however, biofilm already showed full activity. The steady-state simulation confirmed that the change of elimination capacity obtained by increasing only inlet toluene concentration was the same as that obtained by increasing only flow rate of contaminated air. The maximum possible performance is about 20 g/m³h with no addition of nutrients.     

Development of modified stokes expression to model the behavior of expanded beds containing polydisperse resins for protein adsorption

Expanded bed behavior was modeled by using the Richardson-Zaki correlation between the superficial velocity of the feed stream and the void fraction of the bed. A polydisperse material, Chelating excellose® (70-210 Μm in diameter, 1.21 g/cm³ in density), which has Ni²⁺ ions for the selective binding of histidine-tagged proteins, was used as the resin. A method to modify the Stokes expression to express the terminal settling velocity of the resins by introducing two empirical parameters, the effective diameter of the resins and an exponent for(ρ _p -ρ)/Μ term, was developed. Combined use of the Richardson-Zaki correlation and the modified Stokes expression was successful in modeling the bed expansion by incorporating physical properties of feed streams and the resins.     

Solid extraction of caffeine and theophylline from green tea by molecular imprinted polymers

This paper involves a feasibility study on using molecular imprinted polymers as the sorbent materials in solid phase extraction for caffeine and theophylline from green tea. Two kinds of MIPs, with caffeine-theophylline mixture and pentoxifylline-theophylline mixture as the templates respectively, MAA as the monomer, EDMA as the crosslinker and ATBN as the initiator, were applied to this purpose. Mixture solution of caffeine and theophylline (1 Μg/ ml in acetonitrile) was applied to the solid extraction cartridges following a load, wash and elute procedure with acetonitrile, methanol, methanol-acetic acid (90/10, v/v) as the solvents, respectively. This solid phase extraction protocol was applied for extraction of caffeine and theophylline from green tea. Comparison between the results obtained with the MIPs cartridges and a traditional C₁₈ reversed-phase cartridge was made. It showed that the MIP-based sorbent on the solid phase extraction was comparable with that of C₁₈ material. HPLC analysis using a C₁₈ column (5 Μm, 250× 4.6 mm from Rstech corporation), methanol: water (60 :40, v/v) as the mobile phase at a flow rate of 0.6 ml/min was applied for the quantitative determination.     

High-Temperature Stiffness and Damping Measurements to Monitor the Glassy Intergranular Phase in Liquid-Phase-Sintered Silicon Carbides

Detailed stiffness and internal friction ( Q ⁻¹) versus temperature curves were obtained for liquid-phase-sintered silicon carbides using advanced resonant beam analysis up to 1400°C. As-sintered materials display a stable Q ⁻¹-peak near 1100°C, superimposed on an increasing background. The change of stiffness associated with the damping peak is quantitatively related to the amount of matter in pockets of the amorphous intergranular phase in which the refractory SiC matrix grains are embedded. The successful removal of the amorphous pockets by annealing at 1900°C is deduced from the disappearance of the damping peak and confirmed with transmission electron microscopy.     

Oriented crystallization and mechanical properties of polypropylene nucleated on fibrillated polytetrafluoroethylene scaffolds

It is known that friction deposited polytetrafluoroethylene (PTFE) layers are able to nucleate crystallization of thin films of isotactic polypropylene (iPP). In order to investigate the influence of PTFE on the crystallization behavior and morphology of iPP in bulk, PTFE‐particles of two different sizes in various concentrations were melt‐blended with iPP and subsequently processed by injection molding. For one size of particles, high resolution scanning electron microscopy (HR‐SEM) showed the presence of a PTFE scaffold consisting of highly fibrillated PTFE particles. With X‐ray diffraction (WAXD) pole‐figures, it was evidenced that, after melting and recrystallization of the iPP matrix, a strongly oriented crystallization of iPP on this PTFE scaffold takes place (quiescent crystallization conditions). With WAXD it was also shown that under processing conditions, PTFE acts as a nucleating agent for iPP and that PTFE strongly enhances the formation of processing induced morphologies. Impact and tensile performance of the mixtures were measured. Both the strain energy release rate (G_I) and the E‐modulus were found to increase upon introducing PTFE in iPP. POLYM. ENG. SCI., 45:458–468, 2005. © 2005 Society of Plastics Engineers.     

Synthesis and characterization of dehydroabietic acid derivatives suitable for surfactant synthesis

The syntheses of derivatives of dehydroabietic acid suitable for further manipulation into surfactants are presented. The compounds are produced at very high yields and purity. They contain several different functional groups, e.g., carboxylic acid, amine, ester, alcohol, and an aromatic group. The functional groups are useful as the linking unit to the hydrophilic part in synthesizing surfactants.     

Mobile phase composition for resolving whey proteins in reversed-phase high performance liquid chromatography

Reversed-phase high-performance liquid chromatography was successfully developed for the simultaneous and rapid separation for the main whey proteins, α-Lactalbumin and β-Lactoglobulin. This method consisted of a linear gradient of the two mobile phases of 0.1% trifluoroacetic acid in water and 0.1% trifluoroacetic acid in acetonitrile. The total run time for this separation was approximately 30 min, and α-Lactalbumin was eluted followed byβ- Lactoglobulin. The injection volume was fixed at 20 μl and the flow rate was 1 ml 1/min. The optimum mobile phase composition and gradient conditions to separate α-Lactalbumin and β-Lactoglobulin (A+B) were experimentally obtained at the 15 μm particle with a pore size of 300 Å on the linear-gradient mode.     

Dietary stearic acid and risk of cardiovascular disease: Intake,sources, digestion,and absorption

Individual FA have diverse biological effects, some of which affect the risk of cardiovascular disease (CVD). In the context of food-based dietary guidance designed to reduce CVD risk, fat and FA recommendations focus on reducing saturated FA (SFA) and trans FA (TFA), and ensuring an adequate intake of unsaturated FA. Because stearic acid shares many physical properties with the other long-chain SFA but has different physiological effects, it is being evaluated as a substitute for TFA in food manufacturing. For stearic acid to become the primary replacement for TFA, it is essential that its physical properties and biological effects be well understood.