Leakage current in a Si-based nanopore structure and its influence on noise characteristics

We have measured leakage current in a silicon substrate-based nanopore membrane device immersed in an aqueous environment which typically shows the current level of few nA. This current level is compared with the measured current density (400 nA/cm² at 1 V) from the pristine Si wafer (p-type, 10¹⁶/cm³ boron doping) indicating that the exposed Si surface in a nanopore membrane device acts as an electrochemical reaction site. The leakage current is drastically reduced from >10 nA to <100 pA at 1 V by the deposition of a dielectric layer to the Si-based nanopore membrane device. We also noted that the root-mean-square noise of the ionic current is also reduced from 38 to 28 pA in correlation with the reduction of leakage current, indicating that electrochemical reaction provides one of the major sources of noise.     

Induced-charge electro-osmosis of polymer-containing fluid around a metallic rod

Induced-charge electro-osmotic (ICEO) flow of polymer-containing electrolyte solution around a cylindrical gold-coated stainless steel rod under AC electric field is measured by micro-particle image velocimetry (micro-PIV) for the first time. The ICEO flows as functions of the amount of non-ionic PEG (polyethylene glycol), cationic PDADMA (polydiallyldimethylammonium chloride), and anionic PVSASS (polyvinylsulfonic acid sodium salt) polymers added into the salt solution, frequency, and strength of the AC electric field are measured. The ICEO flow of polymer-containing fluid around the rod is quadrupolar with four vortices and is proportional to the square of imposed electric field. The ICEO flow velocity exponentially decreases with an increased concentration of neutral PEG. Ionic polyelectrolytes significantly increase ICEO velocities due to the enriched net charge within the induced electric double layer arising from the electrostatic interaction between the polarized rod’s surface and the charged polyelectrolytes in ionic polymer solution. In addition, polymer concentration affects the dependence of the ICEO flow on the frequency of AC electric field.     

Investigation and improvement of reversible microfluidic devices based on glass–PDMS–glass sandwich configuration

Reversibly assembled microfluidic devices are dismountable and reusable, which is useful for a number of applications such as micro- and nano-device fabrication, surface functionalization, complex cell patterning, and other biological analysis by means of spatial–temporal pattern. However, reversible microfluidic devices fabricated with current standard procedures can only be used for low-pressure applications. Assembling technology based on glass–PDMS–glass sandwich configuration provides an alternative sealing method for reversible microfluidic devices, which can drastically increase the sealing strength of reversibly adhered devices. The improvement mechanism of sealing properties of microfluidic devices based on the sandwich technique has not been fully characterized, hindering further improvement and broad use of this technique. Here, we characterize, for the first time, the effect of various parameters on the sealing strength of reversible PDMS/glass hybrid microfluidic devices, including contact area, PDMS thickness, assembling mode, and external force. To further improve the reversible sealing of glass–PDMS–glass microfluidic devices, we propose a new scheme which exploits mechanical clamping elements to reinforce the sealing strength of glass–PDMS–glass sandwich structures. Using our scheme, the glass–PDMS–glass microchips can survive a pressure up to 400 kPa, which is comparable to the irreversibly bonded PDMS microdevices. We believe that this bonding method may find use in lab-on-a-chip devices, particularly in active high-pressure-driven microfluidic devices.     

Hierarchy-Debug: a scalable statistical technique for fault localization

Considering the fact that faults may be revealed as undesired mutual effect of program predicates on each other, a new approach for localizing latent bugs, namely Hierarchy-Debug, is presented in this paper. To analyze the vertical effect of predicates on each other and on program termination status, the predicates are fitted into a logistic lasso model. To support scalability, a hierarchical clustering algorithm is applied to cluster the predicates according to their presence in different executions. Considering each cluster as a pseudo-predicate, a distinct lasso model is built for intermediate levels of the hierarchy. Then, we apply a majority voting technique to score the predicates according to their lasso coefficients at different levels of the hierarchy. The predicates with relatively higher scores are ranked as fault relevant predicates. To provide the context of failure, faulty sub-paths are identified as sequences of fault relevant predicates. The grouping effect of Hierarchy-Debug helps programmers to detect multiple bugs. Four case studies have been designed to evaluate the proposed approach on three well-known test suites, Space, Siemens, and Bash. The evaluations show that Hierarchy-Debug produces more precise results compared with prior fault localization techniques on the subject programs.     

Lipase-catalyzed esterification of lactic acid with straight-chain alcohols

Enzymatic synthesis of esters of lactic acid and straight-chain alcohols with different chain lengths (C₆–C₁₈) were investigated in batch reactions with hexadecanol (C₁₆) as the model alcohol. Cyclohexane was the best solvent for higher ester yields, and the best biocatalyst was the immobilized Candida antarctica lipase B (Novozym 435) as well as the textile-immobilized Candida sp. lipase. A method was established to obtain ester yields in the range of 71 to 82% for the different alcohols, and the most favorable conditions for the esterification reaction using Novozym 435 were an equimolar ratio of lactic acid to alcohol, each at a concentration of 120 mM each; a 50°C reaction temperature; 190 rpm shaking speed; and the addition of 100 mg molecular sieves (4 Å) for drying. The ester yield increased with increasing lipase load, and a yield of 79.2% could be obtained after 24 h of reaction at 20 wt% of Novozym 435. The immobilized Candida sp. lipase prepared in the laboratory also could be used to produce esters of lactic acid and straight-chain alcohols, but it had a much lower activity than Novozym 435 with a temperature optimum of 40°C.     

An electrochemical study of the dissolution of gold in thiosulfate solutions. Part II. Effect of Copper

Thiosulfate has been considered as one of the most promising of the non-toxic alternatives to cyanide for the leaching of gold and much work has been carried out with the aim of understanding and improving the ammoniacal thiosulfate leaching process. In particular the behaviour of gold in thiosulfate solutions containing copper in the absence of ammonia has received little attention. It has been shown in this study involving electrochemical and leaching tests that copper ions catalyze not only the oxidation of thiosulfate but also the dissolution of gold in alkaline thiosulfate solutions. Electrochemical studies have shown that copper has a positive effect on the anodic dissolution of gold with increasing concentrations of copper resulting in higher dissolution rates of gold at a potential of 0.3V. Studies on the dissolution of gold powder in alkaline oxygenated thiosulfate solutions containing low concentrations of copper have shown that the role of copper in enhancing the dissolution rate of gold is possibly associated with the formation of a copper–thiosulfate–oxygen intermediate which is more reactive in terms of cathodic reduction than dissolved oxygen. The electrochemical experiments have been complemented by a leaching study which has shown that milling of gold powder in the presence of copper (added as ions, metal, or oxide) assists with the dissolution of gold in thiosulfate solutions.     

Effect of randomization on the oxidative stability of corn oil

Randomized corn oil TAG oxidized much faster than natural oil, but after purification with alumina, they oxidized at the same rate. We showed that this effect could not be attributed to a difference, in total tocopherols in the randomized and natural oils. Polar material recovered from the alumina treatment was fractionated by TLC, and a pro-oxidant effect was found in the fractions containing MAG and DAG. However, MAG and DAG, although mild pro-oxidant could not account for the pro-oxidant effect generated by randomization. No other compounds could be detected in the MAG fraction by MS. The pro-oxidant effect of randomized oil disappeared when EDTA or citric acid was added in sufficient amounts. The pro-oxidant effect of randomized corn oil was increased by the incorporation of additional copper or iron at a concentration that did not catalyze oxidation of the purified oil. Treatment of corn oil with ascorbic acid, ascorbyl-6-palmitate, ethyl acetoacetate, ethyl diacetoacetate, and acetylacetone did not reproduce the effect of the unknown pro-oxidant. Although the identity of the pro-oxidant is still unknown, we have confirmed that it is produced during randomization; it does not have pro-oxidant activity alone, but it facilitates the catalytic activity of the transition metal ions.     

Retardation of volatile aldehyde formation in the exhaust of frying oil by heating under low oxygen atmospheres

Volatile aldehydes were generated in the exhaust of high-oleic safflower oil during heating at 180°C by spraying water into atmospheres with four levels of oxygen concentrations (2, 4, 10, and 20%). These aldehydes were quantitatively analyzed by HPLC after the conversion to 2,4-dinitrophenyl hydrazones. Ten alkanals (C₂ through C₁₀), eight 2-alkenals (C₃ through C₁₀) and three 2,4-alkadienals (C₇, C₉, and C₁₀) were found. These aldehyde levels were found to be positively correlated with both the heating time and the atmospheric oxygen concentration. The total amounts of aldehydes were the lowest in the oil heated in an atmosphere with 2% O₂, and corresponded to 1/10 of those in the atmosphere with 20% O₂. Acrolein was not found in oils heated in the atmosphere with 2% oxygen. These results suggest that frying in atmospheres with low oxygen levels can effectively decrease the generation of volatile aldehydes in the exhaust.