Protecting biodegradable coatings releasing antimicrobial agents

This article describes the synthesis and in vitro analysis of poly(ester anhydride) antimicrobial protection coatings. Poly(ester anhydride)s composed of ricinoleic acid, sebacic acid, terephthalic acid, and isophthalic acid were used in this study. The polymers were compatible with various fillers commonly used in paint preparation. The in vitro experiments showed that the polymers are able to release diuron, an antimicrobial agent, for months. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Rheological,thermal, and morphological properties of blends based on poly(propylene), ethylene propylene rubber,and ethylene-1-octene copolymer that could result from end of life vehicles: Effect of maleic anhydride grafted poly(propylene)

The objective of this work is to study the properties of blends that could result from the recycling of end-of-life vehicles (ELV). While ethylene propylene rubber (EPR) and ethylene propylene diene monomer (EPDM) have been used extensively as elastomeric additives in poly(propylene) (PP), they can be substituted by ethylene-1-octene copolymer (EOC). As a consequence, the matter resulting from the sorting of ELV might be more complex and made of PP, EPR, and EOC. The effect of incorporating EOC [that is a polyethylene elastomer (PEE)] and maleic anhydride grafted polypropylene (PP-g-MAH) on the rheological, thermal, and morphological properties of PP/EPR blends has been investigated. Blends of various compositions (with and without compatibilizer) were prepared using a corotating twin-screw extruder. The results were compared to the ones presented by a commercial (PP/EPR) blend. The EPR phase is dispersed in the form of spherical particles in (PP/EPR). The EOC phase is dispersed in the form of aggregated particles. Dynamic viscoelastic and differential scanning calorimetry properties of (PP/EPR)/EOC blends shows the incompatibility of the components even in presence of PP-g-MAH copolymer. POLYM. ENG. SCI., 47:1009–1015, 2007. © 2007 Society of Plastics Engineers     

Design and analysis of single-factor experiments: Analysis of variance of the effect of rice husk ash and commercial fillers in NR compounds

Summary White rice husk ash (WRHA) and black rice husk ash (BRHA) were incorporated into natural rubber (NR) using a laboratory-sized two-roll mill. A conventional vulcanization system was used for curing and physical tests of the NR vulcanized involved determining of tensile and tear resistances. For comparison purposes, precipitated silica (Zeosil-175) and carbon black (N774) were used too. Using the analysis of variance of single-factor experiments, it can be concluded that: BRHA is non-reinforcing filler and its use is limited to 20 phr; WRHA is semi-reinforcing filler and the variation of filler loading (0 up to 50 phr) causes the maximum variation upon tensile strength of NR compounds; and, that although carbon black and silica are reinforcing fillers, a real reinforcement is reached up to 20 phr for tensile strength.     

Soy protein containing isoflavones favorably influences macrophage lipoprotein metabolism but not the development of atherosclerosis in CETP transgenic mice

The possibility that soy protein containing isoflavones influences the development of experimental atherosclerosis has been investigated in ovariectomized mice heterozygous for the human CETP transgene and for the LDL-receptor null allele (LDLr^+/− CETP^+/−). After ovariectomy at 8 wk of age they were fed a fat/cholesterol-rich diet for 19 wk and divided into three experimental groups: dietary unmodified soy protein containing isoflavones (mg/g of diet), either at low-dose (Iso Low, 0.272, n=25), or at high-dose (Iso High, 0.535, n=28); and the atherogenic diet containing an isoflavone-depleted alcohol-washed soy protein as a control group (n=28). Aortic root lipid-stained lesion area (mean μm²×10³±SD) did not differ among Iso Low (12.3±9.9), Iso High (7.4±6.4), and controls (10.7±12.8). Autoantibody titers against plasma oxidized LDL did not differ among the experimental groups. Using the control mice as the reference value (100%), in vitro mouse peritoneal macrophage uptake of labeled acetylated LDL-cholesterol was lower in the Iso High (68%) than in the Iso Low (85%) group. The in vitro percent removal by exogenous HDL of labeled unesterified cholesterol from macrophages previously enriched with human [4-¹⁴C]-cholesteryl oleate acetylated LDL was enhanced in the Iso High group (50%). In spite of these in vitro potentially antiatherogenic actions, soy protein containing isoflavones did not modify the average size of lipid-stained area in the aortic root.     

The contribution of biotic and abiotic processes during azo dye reduction in anaerobic sludge

Azo dye reduction results from a combination of biotic and abiotic processes during the anaerobic treatment of dye containing effluents. Biotic processes are due to enzymatic reactions whereas the chemical reaction is due to sulfide. In this research, the relative impact of the different azo dye reduction mechanisms was determined by investigating the reduction of Acid Orange 7 (AO7) and Reactive Red 2 (RR2) under different conditions. Reduction rates of two azo dyes were compared in batch assays over a range of sulphide concentrations in the presence of living or inactivated anaerobic granular sludge. Biological dye reduction followed zero order kinetics and chemical dye reduction followed second-order rate kinetics as a function of sulfide and dye concentration. Chemical reduction of the dyes was greatly stimulated in the presence of autoclaved sludge: whereas chemical dye reduction was not affected by living or gamma-irradiated-sludge. Presumably redox-mediating enzyme cofactors released by cell lysis contributed to the stimulatory effect. This hypothesis was confirmed in assays evaluating the chemical reduction of AO7 utilizing riboflavin, representative of the heat stable redox-mediating moieties of common occurring flavin enzyme cofactors. Sulfate influenced dye reduction in accordance to biogenic sulfide formation from sulfate reduction. In assays lacking sulfur compounds, dye reduction only readily occurred in the presence of living granular sludge, demonstrating the importance of enzymatic mechanisms. Both chemical and biological mechanisms of dye reduction were greatly stimulated by the addition of the redox-mediating compound, anthraquinone-disulfonate. Based on an analysis of the kinetics and demonstration in lab-scale upward-flow anaerobic sludge bed reactors, the relative importance of chemical dye reduction mechanisms in high rate anaerobic bioreactors was shown to be small due to the high biomass levels in the reactors.     

Thinking about Antarctic Heritage: kaleidoscopes and filters

The preliminary results of a project that is currently investigating the nature and range of meanings of Antarctic heritage are explored. The project involves two visits to Scott Base, and the subjects of the qualitative research are the members of the New Zealand Antarctic community. Work so far suggests that different meanings do exist, and a four-fold typology of meanings is suggested which needs to be considered in decisions affecting the future of Antarctica.     

Prediction of corrosion-induced cover cracking in reinforced concrete structures

Usually, the time of repair/replacement of reinforced concrete structures due to corrosion is controlled by cracking of the concrete cover. Thus, it is important to be able to predict with sufficient accuracy the time from corrosion initiation to crack formation in the concrete cover. The paper presents a critical overview of existing empirical, analytical and numerical models for predicting the time to corrosion-induced cover cracking. A simple nonlinear finite element (FE) is then formulated and validated. The FE model is employed to investigate inaccuracies of analytical models arising due to simplified formulation of the nonlinear behaviour of concrete and inability to account for actual location of corroding reinforcing bars. Recommendations on the applicability of analytical models are provided. Finally, the FE model is used to estimate the amount of corrosion products penetrating into concrete pores and microcracks since this amount is an essential parameter for analytical and numerical models.     

Surface geometric parameters proposal for the advanced control of abrasive waterjet technology

The paper deals with a proposal for surface geometric parameters for advanced quality control of abrasive waterjet technology according to the results obtained by means of non-contact optical shadow method. The main emphasis is put on the analysis of results for defining the process for prediction of new surface creation generated by the set of the abrasive waterjet factors stream of abrasive waterjet, including its geometric parameters. By means of decomposition of measured surface profile according to the root mean square parameter, in four topographical different zones the initial zone, the smooth zone, the transition zone and the rough zone new possibilities for evaluation of the surface quality and optimizing the selected technological factors of the cutting process and their control through the proposed databank conceptual structure are presented. This report deals with the problems of selecting and proposing an acceptable method for surface quality control which is available for continuous measurement and production.     

Preparation of Mg-vermiculite nanoparticles using potassium persulfate treatment

Delamination/exfoliation process of the Mg-vermiculite (Letovice, Czech Republic), particles with size less than 5 microm, was studied after potassium persulfate treatment and compared with known method utilized hydrogen peroxide treatment. X-ray powder diffraction (XRPD) patterns showed that treatment of Mg-vermiculite with different molar concentration of potassium persulfate: c = 0.02, 0.04, and 0.08 mol x dm(-3) at the temperature 60 degrees C for 2 hr caused reduction of relative intensity (I(rel.)) of the basal 001 diffraction to the 15%, 9%, and 4%, respectively, compared to intensity of 001 diffraction of untreated Mg-vermiculite (I(rel.) = 100%). On the other hand I(rel.) of the 001 diffraction of Mg-vermiculite after treatment with 30% and 50% (c = 9.8 and 17.4 mol x dm(-3)) hydrogen peroxide at the 60 degrees C for 2 hr decreased only to I(rel.) = 36% and 32%, respectively. Atomic Force Microscopy (AFM) and Scanning Electron Microscopy (SEM) verified effect of potassium persulfate treatment on structure degradation which is connected with higher degree of delamination/exfoliation of the particles and their cracking into nano-sized particles.