Removal of neutrophil gelatinase‐associated lipocalin by extracorporeal therapies

Neutrophil gelatinase‐associated lipocalin (NGAL) protein is an early biomarker for acute kidney injury (AKI). It is unknown if extracorporeal therapies (EC) have an effect on circulating NGAL levels. This study was designed to describe the kinetics of NGAL molecule in different EC techniques and to evaluate NGAL clearance in different operational conditions. A mock hemofiltration (HF) and hemoperfusion (HP) setup was used. NGAL was added to the blood reservoir and then measured at 30‐minute intervals from arterial, venous, and ultrafiltrate (UF) lines. Removal kinetics and NGAL sieving coefficient were calculated. In our experiments, baseline NGAL concentration averaged 452 μg/L. There was a consistent downward trend throughout the experiment. NGAL concentration in the UF was between 80 and 90 μg/L, though it showed a slight increase in the second hour. The sieving coefficient of NGAL ranged from 0.2 to 0.4 during HF and it appeared to increase with time, suggesting an initial effect of membrane adsorption. HP proved clearly that there was adsorption of NGAL by the membrane and the point of saturation occured at approximately 60 minutes from the start of circulation. Our evaluation demonstrates that NGAL can be adsorbed and ultrafiltrated with polysulfone membranes. This should be taken into consideration when using NGAL as an AKI biomarker in patients undergoing EC circulation.     

Thermal conductivity of ME771 glass-epoxy laminate from millikelvin temperatures to 4 K

Permaglas ME771 is a glass-epoxy laminate which is suitable for use at cryogenic temperatures. We have measured the thermal conductivity of a sample of this material between 64 mK and 4.2 K in the direction parallel to the reinforcing fibres, enabling us to make a comparison with the better known material G-10CR. The thermal conductivity follows the form that would be expected for such a material, and is similar to that of G-10CR, which has a similar (room temperature) tensile strength. We comment on some confusion that has arisen over the difference between G-10CR, a material specifically produced for cryogenic use, and G-10, the more common equivalent.     

Laser surface nanostructuring for reliable Si3N4/Si3N4 and Si3N4/Invar joined components

IR pulsed laser radiation in air was applied to Si₃N₄ and Invar to obtain reliable Si₃N₄/Si₃N₄ and Si₃N₄/Invar adhesive bonded components. The laser pre-treatment produced a homogeneous nanostructured oxide layer on the surfaces, which effectively increased the adhesion at the adhesive/adherends interface and led to cohesive failure in the joining material. The mechanical strength of Si₃N₄/ Si₃N₄ and Si₃N₄/Invar joined components was measured, with and without laser nanostructuring, before and after thermal cycling from room temperature to 50?K, and it resulted that the exposure to extremely low temperatures did not affect the mechanical integrity of the joints. It was also demonstrated that this laser pre-treatment did not alter the mechanical properties of the ceramic substrate.     

Synthesis of poly(N‐isopropylacrylamide) by distillation precipitation polymerization and quantitative grafting on mesoporous silica

In this work, syntheses of thermoresponsive poly(N‐isopropylacrylamide) (PNIPAM) with different molecular weights were carried out in ethanol by distillation precipitation polymerization (DPP) technique. The synthesized polymers were fully characterized by attenuated total reflection Fourier‐transform infrared (ATR‐FTIR) spectroscopy, nuclear magnetic resonance spectroscopy, and size exclusion chromatography techniques. The lower critical solution temperatures of the polymers were determined with differential scanning calorimetry. A simple and versatile method for the in situ synthesis and grafting of PNIPAM on mesoporus silica nanoparticles (MSNs) with improved control over quantitative grafting is devised. The PNIPAM grafted MSNs were characterized with ATR‐FTIR, thermogravimetric analysis, transmission electron microscopy, and dynamic light scattering analyses. From the results obtained it is showed that quantitative grafting of PNIPAM on MSNs from 1 to 20% by weight can be tuned by manipulating the in situ DPP reaction conditions. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44181.     

Synthesis of Autosymmetric Functions in a New Three-Level Form

Autosymmetric functions exhibit a special type of regularity that can speed-up the minimization process. Based on this autosymmetry, we propose a three level form of logic synthesis, called ORAX (EXOR-AND-OR), to be compared with the standard minimal SOP (Sum of Products) form. First we provide a fast ORAX minimization algorithm for autosymmetric functions. The ORAX network for a function f has a first level of at most 2(n−k) EXOR gates, followed by the AND-OR levels, where n is the number of input variables and k is the “autosymmetry degree” of f. In general a minimal ORAX form has smaller size than a standard minimal SOP form for the same function. We show how the gain in area of ORAX over SOP can be measured without explicitly generating the latter. If preferred, a SOP expression can be directly derived from the corresponding ORAX. A set of experimental results confirms that the ORAX form is generally more compact than the SOP form, and its synthesis is much faster than classical three-level logic minimization. Indeed ORAX and SOP minimization times are often comparable, and in some cases ORAX synthesis is even faster.     

Effect of the Phase Composition of Barium-Calcium Alumoscandates on the Emission Properties of Impregnated Cathodes

The effect of scandium oxide additions on the emission properties of impregnated tungsten cathodes was investigated. The synthesis of alumoscandates in the BaO ― CaO ― Sc₂O₃ ― Al₂O₃ system were studied by x-ray diffraction, thermography, and petrographic analysis. The hygroscopic properties of the emission-active material was determined. Based on the results of emission tests the recommended optimal compositions of emission-active material are 2.4 BaO·0.6 CaO·0.1 Sc₂O₃·0.9 Al₂O₃ and 2.6 BaO·1.9 CaO·0.1 Sc₂O₃·0.9 Al₂O₃. Cathodes based on these compositions had lifetimes greater than 10000 h operating in the temperature range 900-1000°C at current densities of 15-20 A/cm² in a vacuum of the order of 10⁻⁶ Torr.

     

UNICORE 6 — Recent and Future Advancements

UNICORE is a European Grid Technology with more than 10 years of history. Originating from the Supercomputing domain, the latest version UNICORE 6 has turned into a general-purpose Grid technology that follows established standards and offers a rich set of features to its users. The paper starts with an architectural insight into UNICORE 6, highlighting the workflow features, standards and the different clients. Next, the current state of advancement is presented by describing recent developments. The paper closes with an outlook on future planned developments.     

On total internal reflection investigation of nanoparticles by integrated micro-fluidic system

We report on a novel sensor for characterization of nanoparticles colloidal suspensions. We employ a diffraction grating under total internal reflection for investigation of nanodisperse fluids passing through an integrated microfluidic channel. Dispersions containing polymeric, metallic, and ferromagnetic nanoparticles are studied. Using this device, we can accurately determine in real-time the specific refractive index for the nanoparticle suspension and the nanoparticle concentration. The nanoparticle concentrations can be calculated with a resolution of 0.3-0.5 wt% for polymeric nanoparticles, 0.03-0.05 wt% for metallic nanoparticles, and 0.05-0.1 wt% for ferromagnetic nanoparticles. This translates to an effective refractive index that can be determined with an accuracy of 7 x 10(-4) for the polymeric and 2 x 10(-4) for the metallic and ferromagnetic dispersions.     

Digital Detection of Single Virus Particles by Multi-Spot,Label-Free Imaging Biosensor on Anti-Reflective Glass

Rapid detection of whole virus particles in biological or environmental samples represents an unmet need for the containment of infectious diseases. Here, an optical device enabling the enumeration of single virion particles binding on antibody or aptamers immobilized on a surface with anti-reflective coating is described. In this regime, nanoparticles adhering to the sensor surface provide localized contributions to the reflected field that become detectable because of their mixing with the interfering waves in the reflection direction. Thus, these settings are exploited to realize a scan-free, label-free, micro-array-type digital assay on a disposable cartridge, in which the virion counting takes place in wide field-of-view imaging. With this approach we could quantify, by enumeration, different variants of SARS-CoV-2 virions interacting with antibodies and aptamers immobilized on different spots. For all tested variants, the aptamers showed larger affinity but lower specificity relative to the antibodies. It is found that the combination of different probes on the same surface enables increasing specificity of detection and dynamic range.     

Superior Thermoelectric Performance of SiGe Nanowires Epitaxially Integrated into Thermal Micro-Harvesters

Semiconductor nanowires have demonstrated fascinating properties with applications in a wide range of fields, including energy and information technologies. Particularly, increasing attention has focused on SiGe nanowires for applications in a thermoelectric generation. In this work, a bottom-up vapour-liquid-solid chemical vapour Deposition methodology is employed to integrate heavily boron-doped SiGe nanowires on thermoelectric generators. Thermoelectrical properties –, i.e., electrical and thermal conductivities and Seebeck coefficient – of grown nanowires are fully characterized at temperatures ranging from 300 to 600 K, allowing the complete determination of the Figure-of-merit, zT, with obtained values of 0.4 at 600 K for optimally doped nanowires. A correlation between doping level, thermoelectric performance, and elemental distribution is established employing advanced elemental mapping (synchrotron-based nano-X-ray fluorescence). Moreover, the operation of p-doped SiGe NWs integrated into silicon micromachined thermoelectrical generators is shown over standalone and series- and parallel-connected arrays. Maximum open circuit voltage of 13.8 mV and power output as high as 15.6 µW cm⁻² are reached in series and parallel configurations, respectively, operating upon thermal gradients generated with hot sources at 200 °C and air flows of 1.5 m s⁻¹. These results pave the way for direct application of SiGe nanowire-based micro-thermoelectric generators in the field of the Internet of Things.