Creep of PVDF monofilament sutures: service performance prediction from short-term tests

Isothermal short-term creep of poly (vinylidene fluoride) (PVDF) monofilament sutures was determined at several temperatures between 10 and 90 °C under the stress of 10 MPa. Long term service performance was predicted for 10 decades of time. The compliance master curve as a function of time fits a hyperbolic sine equation. The temperature shift factor as a function of the temperature a_T (T) is accurately represented by a general equation based on free volume. A simple relationship between the two parameters of the equation is explored. The viscoelasticity of PVDF is also seen in dynamic mechanical analysis performed at the frequency of 1 Hz. The origin of the viscoelastic character well present in the deformability of the PVDF in service is due to the occurrence of the α_c relaxation that is active at ∼50 °C (E″ peak at 1 Hz).     

XPS studies of directly fluorinated HDPE: problems and solutions

X-ray photoelectron spectroscopy (XPS) applied to the study of fluorinated polymer surfaces presents several problems related both to peak assignment and to degradation. In this work, we analyse extensively the question of XPS peak assignments in this kind of surfaces. We conclude that in this kind of surfaces using binding energy differences between fluorine and carbon is better than using absolute binding energies. Also a useful relation between fluorine photoelectron energy vs. polymer composition expressed through the atomic ratio fluorine/carbon (F/C) was found. A protocol for data treatment is proposed and applied to a XPS study of the degradation induced by X-ray on high-density polyethylene surfaces modified by direct fluorination. Results obtained for the degradation, namely the atomic ratio F/C obtained by two different methods, combined with angle resolved X-ray photoelectron spectroscopy (ARXPS) were used to study the fluorine concentration profile in depth, producing self-consistent results.     

Brain-computer interface in multimedia communication

This article raises various issues in the design of an efficient BCI system in multimedia applications. The main focus is on one specific modality, namely an electroencephalography (EEG)-based BCI. In doing so, we provide an overview of the most recent progress achieved in this field, with an emphasis on signal processing aspects.     

Bedload Transport in Alluvial Channels

Hydraulic, sediment, land-use, and rock-erosivity data of 22 alluvial streams were used to evaluate conditions of bedload transport and the performance of selected bedload-transport equations. Transport categories of transport-limited (TL), partially transport-limited (PTL), and supply-limited (SL) were identified by a semiquantitative approach that considers hydraulic constraints on sediment movement and the processes that control sediment availability at the basin scale. Equations by Parker et al. in 1982, Schoklitsch in 1962, and Meyer-Peter and Muller in 1948 adequately predicted sediment transport in channels with TL condition, whereas the equations of Bagnold in 1980, and Schoklitsch, in 1962, performed well for PTL and SL conditions. Overall, the equation of Schoklitsch predicted well the measured bedload data for eight of 22 streams, and the Bagnold equation predicted the measured data in seven streams.     

Lexically scoped distribution: what you see is what you get

We define a lexically scoped, asynchronous and distributed π-calculus, with local communication and process migration. This calculus adopts the network-awareness principle for distributed programming and follows a simple model of distribution for mobile calculi: a lexical scope discipline combines static scoping with dynamic linking, associating channels to a fixed site throughout computation. This discipline provides for both remote invocation and process migration. A simple type system is a straightforward extension of that of the π-calculus, adapted to take into account the lexical scope of channels. An equivalence law captures the essence of this model: a process behavior depends on the channels it uses, not on where it runs.     

Optimization of the properties obtained by quenching in martensitic stainless steels X30-40Cr13 and X40-60CrMoV14

An experimental study of the effects produced by different parameters of the heat-quenching cycle permitted the optimization of the properties typical of these martensitic stainless steels: hardness and corrosion resistance. The results obtained demonstrate that the heating temperatures currently used in industrial quenching treatment of these steels should be modified.     

Spectroscopic investigation of Nd ion in LiNbO3, MgO:LiNbO3 and LiTaO3 single crystals relevant for laser applications

The polarized absorption and luminescence properties of Nd³⁺ doped isostructural LiNbO₃, MgO:LiNbO₃ and LiTaO₃ nonlinear bulk single crystals are reported. Pump-probe experiments associated with the Judd-Ofelt approach are used to estimate two types of room temperature cross sections: polarized emission cross sections of the dominant ⁴F_3/2 → ⁴I_1//2 transition near 1085 and 1093 nm and polarized excited-state absorption cross sections in the same spectral domain and in the green spectral range corresponding to self frequency doubling. Self frequency-doubling results are also given in Nd:LiNbO₃ and Nd:MgO:LiNbO₃ versus sample temperature.     

Surface crystallization of melt-spun Pd40Ni40P20 glass

The crystallization of Pd₄₀Ni₄₀P₂₀ glass, produced by melt-spinning in air, has been studied by optical metallography. Crystallization is predominantly from the surface and is more prevalent on the wheel-side. The non-uniformity is attributed to variation in quench rate during production. A three-stage anneal permits crystals which have nucleated at the surface to be identified and their size distribution to be analysed. The surface nucleation is heterogeneous and appears to be hindered by mild oxidation. The annealing atmosphere markedly affects the surface crystallization behaviour, as does removal of the original ribbon surface. When nucleation is sparse, partial crystallization causes the development of noticeable relief on the sample surfaces.     

Improved GaAs-based quantum cascade laser (/spl lambda//spl sim/11 /spl mu/m) using high-reflectivity metal facet coating

By applying a high-reflectivity metal coating to the rear facet of a GaAs-based quantum cascade laser operating at /spl lambda//spl sim/11.5 /spl mu/m, the threshold current has been reduced by 11% at 260 K and pulsed operation of the epilayer-up mounted device was extended from 283 to 294 K.