Twin-image suppression in digital in-line holography based on wave-front filtering

Pattern Analysis and Applications - Digital holography is an imaging process able to recreate three-dimensional representations of objects from recording pattern interference among distinct waves....     

Polyvinylidene fluoride nanofibers obtained by electrospinning and blowspinning: Electrospinning enhances the piezoelectric β-phase – myth or reality?

Considerable effort has been devoted to improving the properties of PVDF (polyvinylidene fluoride), arguably the most technologically important piezoelectric polymer. Electrospinning has been found to be a particularly effective method of producing PVDF nanofibers with superior piezoelectric properties due to the resulting exceptionally high fraction of the piezoelectrically active crystalline β-phase. It is typically assumed that the high external electric fields applied during electrospinning enhance the formation of this β-phase, with the confused literature offering various unsatisfactory mechanistic explanations. However, by comparing PVDF nanofibers produced by two different processes (electrospinning and blowspinning), we show that the electric field is entirely unnecessary; indeed, the crystallization dynamics are principally driven by the applied mechanical stress, as evidenced by structurally identical 200 nm diameter PVDF fibers produced with and without external electric fields.     

Effect of different surface treatments on polypropylene composites reinforced with yerba mate fibers: Physical,mechanical, chemical,and morphological properties

This study presents the preparation of post-consumer polypropylene (r-PP) composites filled with 30 wt% yerba mate (YM) stick particles. To improve the fiber–matrix adhesion, three surface treatments were performed: alkaline treatment with sodium hydroxide (NaOH) and use of 3-aminopropyltriethoxysilane (APTS) and maleic anhydride graft polypropylene copolymer (PP-g-MA) as coupling agents. Mechanical properties including tensile, flexural, and impact resistance were determined, and chemical (Fourier transform infrared spectroscopy [FTIR]), physical (water absorption), and morphological analyses were performed. The main findings show that the treatments were efficient in improving the mechanical properties of the composites, with emphasis on the r-PP/YM30/APTS and r-PP/YM30/PP-g-MA composites, which proved to be superior in tensile, flexion and impact strength and absorption of water compared to the untreated composite. The morphological analysis showed a better interaction between the fiber and the polymeric matrix for the composites with YM/APTS and YM/PP-g-MA, which corroborates the results of tensile and flexural strength, as well as with the spectra of FTIR in which the chemical modification of the fibers is observed. However, the results show that these treatments are promising in obtaining composites with recycled matrix with better properties.     

Analysis of surface integrity for minimum quantity lubricant—MQL in grinding

The quality of machined components is currently of high interest, for the market demands mechanical components of increasingly high performance, not only from the standpoint of functionality but also from that of safety. Components produced through operations involving the removal of material display surface irregularities resulting not only from the action of the tool itself, but also from other factors that contribute to their superficial texture. This texture can exert a decisive influence on the application and performance of the machined component. This article analyzes the behavior of the minimum quantity lubricant (MQL) technique and compares it with the conventional cooling method. To this end, an optimized fluid application method was devised using a specially designed nozzle, by the authors, through which a minimum amount of oil is sprayed in a compressed air flow, thus meeting environmental requirements. This paper, therefore, explores and discusses the concept of the MQL in the grinding process. The performance of the MQL technique in the grinding process was evaluated based on an analysis of the surface integrity (roughness, residual stress, microstructure and microhardness). The results presented here are expected to lead to technological and ecological gains in the grinding process using MQL.     

A multimodal feature learning approach for sentiment analysis of social network multimedia

In this paper we investigate the use of a multimodal feature learning approach, using neural network based models such as Skip-gram and Denoising Autoencoders, to address sentiment analysis of micro-blogging content, such as Twitter short messages, that are composed by a short text and, possibly, an image. The approach used in this work is motivated by the recent advances in: i) training language models based on neural networks that have proved to be extremely efficient when dealing with web-scale text corpora, and have shown very good performances when dealing with syntactic and semantic word similarities; ii) unsupervised learning, with neural networks, of robust visual features, that are recoverable from partial observations that may be due to occlusions or noisy and heavily modified images. We propose a novel architecture that incorporates these neural networks, testing it on several standard Twitter datasets, and showing that the approach is efficient and obtains good classification results.     

3-D Unitary ESPRIT: Accurate attitude estimation for unmanned aerial vehicles with a hexagon-shaped ESPAR array

Accurate estimation of the attitude of unmanned aerial vehicles (UAVs) is crucial for their control and displacement. Errors in the attitude estimate may misuse the limited battery energy of UAVs or even cause an accident. For attitude estimation, proprioceptive sensors such as inertial measurement units (IMUs) are widely applied, but they are susceptible to inertial guidance error. With antenna arrays currently being installed in UAVs for communication with ground base stations, we can take advantage of the array structure in order to improve the estimates of IMUs via data fusion. In this paper, we therefore propose an attitude estimation system based on a hexagon-shaped 7-element electronically steerable parasitic antenna radiator (ESPAR) array. The ESPAR array is well-suited for installment in the UAVs with broad wings and short bodies. Our proposed solution returns an estimation for the pitch and roll based on the inter-element phase delay estimates of the line-of-sight path of the impinging signal over the antenna array. By exploiting the parallel and centrosymmetric structure in the hexagon-shaped ESPAR array, the 3-dimensional Unitary ESPRIT algorithm is applied for phase delay estimation to achieve high accuracy as well as computational efficiency. We devise an attitude estimation algorithm by exploiting the geometrical relationship between the UAV attitude and the estimated phase delays. An analytical closed-form expression of the attitude estimates is obtained by solving the established simultaneous nonlinear equations. Simulations results show the feasibility of our proposed solution for different signal-to-noise ratio levels as well as multipath scenarios.     

Mobilizing Company Members' Full Innovative Potential

Most of the literature on innovation management highlights the fundamental role played by people in the innovation process and the need to fully develop the creative and innovative potential of organizations' members. This article offers the result of extensive research carried out among some of the most innovative companies in the Basque Country, a highly innovative region located in the north of Spain. It draws interesting conclusions about how these innovative companies combine strong leadership, human resource practices, and an organizational culture that enhances innovation capabilities among the company's employees. More specifically, it answers questions such as the following: Are human resources policies, leadership, and innovation culture implemented equally in Basque innovative companies? Do companies make the same effort in deploying these elements or routines and practices related to them? Can we see a pattern in the use of these elements among innovative firms? © 2012 Wiley Periodicals, Inc.     

Pressure waves in the aorta during isolated abdominal belt loading: the magnitude, phasing, and attenuation

While rupture of the aorta is a leading cause of sudden death following motor vehicle crashes, the specific mechanism that causes this injury is not currently well understood. Aortic ruptures occurring in the field are likely due to a complex combination of contributing factors such as acceleration, compression of the chest, and increased pressure within the aorta. The objective of the current study was to investigate one of these factors in more detail than has been done previously; specifically, to investigate the in situ intra-aortic pressure generated during isolated belt loading to the abdomen. Ten juvenile swine were subjected to dynamic belt loads applied to the abdomen. Intraaortic pressure was measured at multiple locations to assess the magnitude and propagation of the resulting blood pressure wave. The greatest average peak pressure (113.6 +/- 43.5 kPa) was measured in the abdominal aorta. Pressures measured in the thoracic aorta and aortic arch were 70 per cent and 50 per cent, respectively, that measured in the abdominal aorta. No macroscopic aortic trauma was observed. To the authors' knowledge the present study is the first one to document the presence, propagation, and attenuation of a transient pressure wave in the aorta generated by abdominal belt loading. The superiorly moving wave is sufficient to generate hydrostatic and intimal shear stress in the aorta, possibly contributing to the hypothesized mechanisms of traumatic aortic rupture.     

A greedy randomized adaptive search procedure for the point-feature cartographic label placement

The point-feature cartographic label placement problem (PFCLP) is an NP-hard problem, which appears during the production of maps. The labels must be placed in predefined places avoiding overlaps and considering cartographic preferences. Owing to its high complexity, several heuristics have been presented searching for approximated solutions. This paper proposes a greedy randomized adaptive search procedure (GRASP) for the PFCLP that is based on its associated conflict graph. The computational results show that this metaheuristic is a good strategy for PFCLP, generating better solutions than all those reported in the literature in reasonable computational times.