Hysteresis loops of individual Co nanostripes measured by magnetic force microscopy

High-resolution magnetic imaging is of utmost importance to understand magnetism at the nanoscale. In the present work, we use a magnetic force microscope (MFM) operating under in-plane magnetic field in order to observe with high accuracy the domain configuration changes in Co nanowires as a function of the externally applied magnetic field. The main result is the quantitative evaluation of the coercive field of the individual nanostructures. Such characterization is performed by using an MFM-based technique in which a map of the magnetic signal is obtained as a function of both the lateral displacement and the magnetic field.     

Corrosion behavior of Eurofer 97 and ODS-Eurofer alloys compared to traditional stainless steels

In the present work, the corrosion resistance of ferritic-martensitic EUROFER 97 and ODS-EUROFER steels was tested in solutions containing NaCl or H₂SO₄ and KSCN, both at 25 °C. The results were compared to those of AISI 430 ferritic and AISI 410 martensitic conventional stainless steels. The as-received samples were tested by electrochemical techniques, specifically, electrochemical impedance spectroscopy, potentiodynamic polarization curves, and double-loop electrochemical potentiokinetic reactivation tests. The surfaces were observed by scanning electron microscopy after exposure to corrosive media. The results showed that EUROFER 97 and ODS-EUROFER alloys present similar corrosion resistance but lower than ferritic AISI 430 and martensitic 410 stainless steels.     

Effect of Water on the Ethanolysis of Waste Cooking Soybean Oil Using a Tin(II) Chloride Catalyst

Biodiesel production from cheap lipid raw materials is economically welcome, but a high free fatty acids (FFA) content makes it incompatible with traditional alkaline catalysts. Although liquid mineral acids are alternatively used, serious drawbacks such as high corrosiveness and large effluent generation, as well as the impossibility of catalyst reuse compromises its application. Contrarily, solid acid catalysts appear to be an attractive option; however, the water present or generated during FFA esterification provokes the leaching and deactivation of these catalysts. Thus, in this work we have evaluated the use of tin chloride SnCl₂, which is less corrosive, water tolerant, and a recyclable Lewis acid catalyst, on FFA ethanolysis using waste cooking oil samples (WCO). Additionally, the main kinetic parameters of the reactions were assessed. Compared to pTSA (p-toluenesulfonic-acid), a catalyst also evaluated, SnCl₂ efficiently promoted FFA ethanolysis even in the presence of high amounts of water (ca. 0.1–5.0% w/w). Moreover, the homogeneous SnCl₂ catalyst was easily recovered and reused successively, without loss of activity.     

Electrical, mechanical, and glass transition behavior of polycarbonate-based nanocomposites with different multi-walled carbon nanotubes

Five commercially available multi-walled carbon nanotubes (MWNTs), with different characteristics, were melt mixed with polycarbonate (PC) in a twin-screw micro compounder to obtain nanocomposites containing 0.25-3.0 wt.% MWNT. The electrical properties of the composites were assessed using bulk electrical conductivity measurements, the mechanical properties of the composites were evaluated using tensile tests and dynamic mechanical analysis (DMA), and the thermal properties of the composites were investigated using differential scanning calorimetry (DSC). Electrical percolation thresholds (p_cs) were observed between 0.28 wt.% and 0.60 wt.%, which are comparable with other well-dispersed melt mixed materials. Based on measurements of diameter and length distributions of unprocessed tubes it was found that nanotubes with high aspect ratios exhibited lower p_cs, although one sample did show higher p_c than expected (based on aspect ratio) which was attributed to poorer dispersion achieved during mixing. The stress-strain behavior of the composites is only slightly altered with CNT addition; however, the strain at break is decreased even at low loadings. DMA tests suggest the formation of a combined polymer-CNT continuous network evidenced by measurable storage moduli at temperatures above the glass transition temperature (T_g), consistent with a mild reinforcement effect. The composites showed lower glass transition temperatures than that of pure PC. Lowering of the height of the tanδ peak from DMA and reductions in the heat capacity change at the glass transition from DSC indicate that MWNTs reduced the amount of polymer material that participates in the glass transition of the composites, consistent with immobilization of polymer at the nanotube interface.     

A Perinatal Palatable High-Fat Diet Increases Food Intake and Promotes Hypercholesterolemia in Adult Rats

The main goal of the present study was to evaluate the long-term effects of a perinatal palatable high-fat diet on the food intake and cholesterol profile of adult rats. Male Wistar rats (aged 22 days) were divided into two groups according to their mother’s diet during gestation and lactation (C _p, n = 10; pups from control mothers; and HL_p n = 10; pups from mothers fed a palatable high-fat diet). At the 76th day, pups were housed individually for 14 days, and daily food consumption was determined during a period of 6 days. Blood from 100-day-old rats was sampled by cardiac puncture. Fasting (12 h) serum glucose, total cholesterol, LDL-C, HDL-C, triglycerides (TG), and VLDL-C levels were determined. The measurement of food intake was higher in the animals submitted to a hyperlipidic diet during the perinatal period. Serum total cholesterol, LDL-C, HDL-C, TG, VLDL-C and glycemia were increased in the HL_p group compared to the control group. Our findings show that an early life environment with a high-fat diet can contribute to metabolic disease in later life.     

Electrical and rheological percolation in poly(vinylidene fluoride)/multi‐walled carbon nanotube nanocomposites

Nanocomposites of poly(vinylidene fluoride) (PVDF) and multi‐walled carbon nanotubes (MWCNTs) were prepared through melt blending in a batch mixer (torque rheometer equipped with a mixing chamber). The morphology, rheological behavior and electrical conductivity were investigated through transmission electron microscopy, dynamic oscillatory rheometry and the two‐probe method. The nanocomposite with 0.5 wt% MWCNT content presented a uniform dispersion through the PVDF matrix, whereas that with 1 wt% started to present a percolated network. For the nanocomposites with 2 and 5 wt% MWCNTs the formation of this nanotube network was clearly evident. The electrical percolation threshold at room temperature found for this system was about 1.2 wt% MWCNTs. The rheological percolation threshold fitted from viscosity was about 1 wt%, while the threshold fitted from storage modulus was 0.9 wt%. Thus fewer nanotubes are needed to approach the rheological percolation threshold than the electrical percolation threshold. Copyright © 2010 Society of Chemical Industry     

Effect of pressure on the structure and electrical conductivity of cardanol–furfural–polyaniline blends

Pressure‐sensitive polymers that simultaneously present reasonable electrical conducting properties, useful thermosetting behavior, and softness are hard to develop. To combine these properties into a single material, a cardanol‐based phenolic resin was prepared and blended in situ with polyaniline (PAni). The final polymer blend was composed of a soft solid material that could not be dissolved in ordinary solvents. Samples were characterized through X‐ray scattering, Fourier transform infrared (FTIR) spectroscopy, and electrical conductivity and pressure sensitivity measurements. FTIR results indicate that the insertion of PAni into the blends did not change the chemical nature of the resin. According to wide‐angle X‐ray scattering results, PAni was dispersed homogeneously in the final polymer samples; this improved the sensitivity of the electrical conductivity to pressure variations, as confirmed through electromechanical tests. Pressure sensitivity and electromechanical analyses indicated that the produced blends could be used as pressure‐sensing materials. Among the tested materials, the blends containing 5 wt % PAni·H₂SO₄ presented the largest compression sensitivity values. Finally, it was shown for the first time through XRD analyses under pressure that PAni chains were considerably disturbed by compressive stresses. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Preparation and characterisation of poly(3,4-ethylenedioxythiophene) and poly(3,4-ethylenedioxythiophene)/poly(neutral red) modified carbon film electrodes, and application as sensors for hydrogen peroxide

Poly(3,4-ethylenedioxythiophene) (PEDOT) films have been prepared for the first time on carbon-film electrodes (CFE) in aqueous solution using electropolymerisation by potential cycling, potentiostatically and galavanostatically. Characterisation of the modified electrodes was done by cyclic voltammetry and electrochemical impedance spectroscopy and the stability of the polymer films was probed. The coated electrodes were tested for application as hydrogen peroxide sensors, by oxidation and reduction. A novel polymer film was also formed by modification of CFE by co-electropolymerisation of EDOT and the phenazine dye neutral red (NR) – (PEDOT/PNR) with a view to enhancing the properties for sensor applications. It was found that hydrogen peroxide reduction at the PEDOT/PNR coated electrodes could be carried out at a less negative potential, the sensor performance comparing very favourably with that of other polymer-modified electrodes reported in the literature.     

Blends of natural rubber and polyurethane latices studied by 1H wideline and 13C MAS solid‐state NMR

¹H wideline and ¹³C magic‐angle spinning NMR have been used to study the morphology and dynamics of latex‐cast and solution‐cast film blends of natural rubber (NR) and a polyurethane (PU) based on poly(?‐caprolactone) diol and isophorone di‐isocyanate. ¹H T₁ and T_1ρ relaxation times have been measured, and the extent of interpenetration of the NR and PU constituents has been monitored using the Goldman–Shen technique. The NMR spectra and relaxation properties indicated that the NR and PI constituents largely occupy separated domains on a distance scale of >10 nm. The Goldman–Shen experiments indicated that there was slightly greater contact between NR and PU in the solution‐cast samples than in the latex‐cast. The tensile properties of the films have been measured. The tensile strength and initial Young's modulus pass through a maximum at a PU content of about 50 wt%. © 2002 Society of Chemical Industry