VLSI scaling methods and low power CMOS buffer circuit

Device scaling is an important part of the very large scale integration(VLSI) design to boost up the success path of VLSI industry, which results in denser and faster integration of the devices. As technology node moves towards the very deep submicron region, leakage current and circuit reliability become the key issues. Both are increasing with the new technology generation and affecting the performance of the overall logic circuit. The VLSI designers must keep the balance in power dissipation and the circuit’s performance with scaling of the devices. In this paper, different scaling methods are studied first. These scaling methods are used to identify the effects of those scaling methods on the power dissipation and propagation delay of the CMOS buffer circuit. For mitigating the power dissipation in scaled devices, we have proposed a reliable leakage reduction low power transmission gate(LPTG) approach and tested it on complementary metal oxide semiconductor(CMOS) buffer circuit. All simulation results are taken on HSPICE tool with Berkeley predictive technology model(BPTM) BSIM4 bulk CMOS files. The LPTG CMOS buffer reduces 95.16% power dissipation with 84.20% improvement in figure of merit at 32 nm technology node. Various process, voltage and temperature variations are analyzed for proving the robustness of the proposed approach. Leakage current uncertainty decreases from 0.91 to 0.43 in the CMOS buffer circuit that causes large circuit reliability.     

Trypsin-like Inhibitor Domain (TIL)-Harboring Protein Is Essential for Aedes aegypti Reproduction

Cysteine-rich trypsin inhibitor-like domain (TIL)-harboring proteins are broadly distributed in nature but remain understudied in vector mosquitoes. Here we have explored the biology of a TIL domain-containing protein of the arbovirus vector Aedes aegypti, cysteine-rich venom protein 379 (CRVP379). CRVP379 was previously shown to be essential for dengue virus infection in Ae. aegypti mosquitoes. Gene expression analysis showed CRVP379 to be highly expressed in pupal stages, male testes, and female ovaries. CRVP379 expression is also increased in the ovaries at 48 h post-blood feeding. We used CRISPR-Cas9 genome editing to generate two mutant lines of CRVP379 with mutations inside or outside the TIL domain. Female mosquitoes from both mutant lines showed severe defects in their reproductive capability; mutant females also showed differences in their follicular cell morphology. However, the CRVP379 line with a mutation outside the TIL domain did not affect male reproductive performance, suggesting that some CRVP379 residues may have sexually dimorphic functions. In contrast to previous reports, we did not observe a noticeable difference in dengue virus infection between the wild-type and any of the mutant lines. The importance of CRVP379 in Ae. aegypti reproductive biology makes it an interesting candidate for the development of Ae. aegypti population control methods.     

Application of the phase extension method in virus crystallography

The procedure for phase extension (PX) involves gradually extending the initial phases from low resolution (e.g. ～8?Å) to the high-resolution limit of a diffraction data set. Structural redundancy present in the viral capsids that display icosahedral symmetry results in a high degree of non-crystallographic symmetry (NCS), which in turn translates into higher phasing power and is critical for improving and extending phases to higher resolution. Greater completeness of the diffraction data and determination of a molecular replacement solution, which entails accurately identifying the virus particle orientation(s) and position(s), are important for the smooth progression of the PX procedure. In addition, proper definition of a molecular mask (envelope) around the NCS-asymmetric unit has been found to be important for the success of density modification procedures, such as density averaging and solvent flattening. Regardless of the degree of NCS, the PX method appears to work well in all space groups, provided an accurate molecular mask is used along with reasonable initial phases. However, in the cases with space group P1, in addition to requiring a molecular mask, starting the PX at a higher resolution (e.g. 6?Å) overcame the previously reported problems due to Babinet phases and phase flipping errors.     

Structure and Properties of Nano-Scale Oxide-Dispersed Iron

Bulk samples of pure iron and yttria dispersed iron with and without titanium (i.e., Fe, Fe-Y₂O₃, and Fe-Y₂O₃-Ti) were prepared by hot extrusion of high-energy ball-milled powders. An examination of the microstructure using TEM revealed that the addition of titanium resulted in the reduction of the dispersoid size with a concomitant increase in the volume fraction of the dispersoids. As a result, Fe-Y₂O₃-Ti exhibited a substantial increase in hardness and tensile properties as compared to Fe and Fe-Y₂O₃. The higher hardness and strength of Fe-Y₂O₃-Ti is shown to be due to the presence of finer and higher number density of Y-Ti-O complex oxides. Dynamic strain aging in the temperature range of 423 K to 573 K (150 °C to 300 °C) was observed in all the compositions studied.     

SLDG: a metamodel for Simulink/Stateflow models and its applications

Simulink and Stateflow (SL/SF) models are being widely used to design and develop embedded systems. Often the SL/SF models of embedded controllers turn out to be large and consist of many subsystems and hierarchies. When such a system is maintained, it becomes difficult to manually analyse the model to identify the impacted elements due to the existence of several explicit and implicit dependencies among the model elements. To automate the analysis of an SL/SF model, we propose a metamodel to capture various types of dependencies existing across the basic blocks. We have named this metamodel Simulink dependency graph (SLDG). We investigate the use of SLDG in change impact visualization and regression test selection. We have developed a prototype tool by implementing our approach for the aforementioned applications.     

The interaction between molten gallium and the hydrocarbon medium induced by ultrasonic energy—can gallium carbide be formed?

Ultrasonic irradiation of molten gallium in organic liquids (decane, dodecane, etc.) results in dispersion of the gallium into nanometric spheres. These were examined by several analytical methods XRD, DSC, Raman and IR spectroscopy) as well as electron microscopy (SEM, TEM) and found to be composed of Ga and C. The DSC analysis indicates that the Ga has possibly reacted with carbon, while the Raman spectrum of the product demonstrates a strong additional peak that could not be identified. This work explores the possibility that the product is gallium carbide or another gallium‐carbon complex. To investigate the nature of the product, we performed detailed extended X‐ray absorption fine structure (EXAFS) and X‐ray absorption near‐edge structure (XANES) analyses. On the basis of DSC, IR, and Raman it appear to be formation of GaC, whereas the analysis by EXAFS and XANES demonstrated that the gallium is found to be in a higher reduced state (almost metallic), supported by carbon. The question that remains open in addition to the one related to the formation of galium carbide is whether a complex structure, including oxygen contamination is involved in the layers surrounding the Ga as indicated by the EXAFS results.     

An ultra-low power high-performance CMOS temperature sensor with an inaccuracy of − 0.3 °C/ + 0.1 °C for aerospace applications

Microsystem Technologies - In the current paper, a new temperature sensor with improved temperature inaccuracy and with very low power consumption has been designed for avionic industry. The...     

Predictive Thermal Inactivation Model for Effects and Interactions of Temperature, NaCl, Sodium Pyrophosphate, and Sodium Lactate on Listeria monocytogenes in Ground Beef

The effects and interactions of heating temperature (60 °C to 73.9 °C), salt (0.0 % to 4.5 %?w/v), sodium pyrophosphate (0.0 % to 0.5 %?w/v), and sodium lactate (0.0 % to 4.5 %?w/v) on the heat resistance of a five-strain mixture of Listeria monocytogenes in 75 % lean ground beef were examined. Meat samples in sterile filtered stomacher bags were heated in a temperature controlled waterbath to determine thermal death times. The recovery medium was tryptic soy agar supplemented with 0.6 % yeast extract and 1 % sodium pyruvate. Weibull survival functions were employed to model the primary survival curves. Then, survival curve-specific estimated parameter values obtained from the Weibull model were used for determining a secondary model. The results indicate that temperature and salt have a large impact on the inactivation kinetics of L. monocytogenes, while sodium lactate (NaL) has an impact in the presence of salt. The model presented in this paper for predicting inactivation of L. monocytogenes can be used as an aid in designing lethality treatments meant to control the presence of this pathogen in ready-to-eat products.