A Robust Transferable Method for the Determination of Glyphosate Residue in Liver After Derivatization by Ultra-high Pressure Liquid Chromatography–Tandem Mass Spectrometry

Glyphosate determination in liver is challenging due to this particular molecule/matrix combination. Glyphosate is a very polar molecule and liver composition is highly variable between individuals and species. Since 2014, the Multiannual Control Program (MACP) of the European Union (EU) demands to analyse glyphosate in food of animal origin on a voluntary basis. Moreover, this analysis will be mandatory in 2017. This paper describes a robust and easily transferable method for glyphosate quantification in liver of animal origin by means of liquid chromatography–tandem mass spectrometry (LC-MS/MS). An intensive clean-up was used to eliminate matrix interferences and was combined with a derivatization step which ensures good retention of glyphosate on a conventional reverse-phase LC column. This method allows to meet the MACP requirements without a time-consuming change in the set-up of the routinely used LC-MS/MS system. Furthermore, it allows the use of an LC column and mobile phases often used in multi-residue analysis. The analytical method was validated according to the SANCO/12571/2013 criteria. Isotopic dilution was used to quantify glyphosate, leading to mean apparent recoveries of 115 and 101 % for the low (0.025 mg kg^?1) and the high (0.250 mg kg^?1) fortification levels, respectively. At both levels, the relative standard deviation was below 10 %. The limit of quantification of 0.025 mg kg^?1 was found to be satisfactory as it was below the maximum residue level (MRL) value set at 0.050 mg kg^?1 for glyphosate in liver. It is also the lowest MRL for all commodity types.     

Increased conversion efficiency in cadmium telluride photovoltaics by luminescent downshifting with quantum dot/poly(methyl methacrylate) films

Commercially available quantum dots have been encapsulated in a poly(methyl methacrylate) film and used as a luminescent downshifting layer on cadmium sulfide/cadmium telluride photovoltaic devices. Application of these films has resulted in a relative improvement to the short‐circuit current of over 4% by I–V measurement, with a significant increase in the contribution of short‐wavelength light resulting in 25% of the current available in this part of the spectrum being captured. The films have been shown to be highly scattering and the associated difficulties this provides to external quantum efficiency measurements have been discussed. A range of optical characterisation techniques, particularly laser beam induced current, have been used to probe the effect the films have on a cadmium sulfide/cadmium telluride device. An alternate methodology for performing external quantum efficiency measurements with the quantum dot films has been proposed. Copyright © 2013 John Wiley & Sons, Ltd.     

Influence of a metallic filler on polyurethane formation

The addition of metallic fillers is recognized to impart improvement of acoustic properties to polyurethane-based materials used for marine applications. The system under consideration was obtained by the reaction of a triisocyanateterminated prepolymer with 1,4-butanediol, in the presence of various concentrations of lead powder. With increasing lead content, gelation time is reduced and an Einstein-type law does not apply. The kinetics of the reaction were determined by Fourier transform infrared spectroscopy. Deviation from the classic second order is observed for the filled systems, and the higher the lead content, the more important the deviation is, showing undoubtedly the catalytic effect of the metallic powder.     

Human Chorionic Gonadotropin and Early Embryogenesis: Review

Human chorionic gonadotropin (hCG) has four major isoforms: classical hCG, hyperglycosylated hCG, free β subunit, and sulphated hCG. Classical hCG is the first molecule synthesized by the embryo. Its RNA is transcribed as early as the eight-cell stage and the blastocyst produces the protein before its implantation. This review synthetizes everything currently known on this multi-effect hormone: hCG levels, angiogenetic activity, immunological actions, and effects on miscarriages and thyroid function.     

Immune Checkpoint Blockade in Advanced Cutaneous Squamous Cell Carcinoma: What Do We Currently Know in 2020?

Cutaneous squamous cell carcinoma (cSCC) is the second most common skin cancer that predominantly arises in chronically sun-damaged skin. Immunosuppression, genetic disorders such as xeroderma pigmentosum (XP), exposure to certain drugs and environmental noxae have been identified as major risk factors. Surgical removal of cSCC is the therapy of choice and mostly curative in early stages. However, a minority of patients develop locally advanced tumors or distant metastases that are still challenging to treat. Immune checkpoint blockade (ICB) targeting CTLA-4, PD-L1 and PD-1 has tremendously changed the field of oncological therapy and especially the treatment of skin cancers as tumors with a high mutational burden. In this review, we focus on the differences between cSCC and cutaneous melanoma (CM) and their implications on therapy, summarize the current evidence on ICB for the treatment of advanced cSCC and discuss the chances and pitfalls of this therapy option for this cancer entity. Furthermore, we focus on special subgroups of interest such as organ transplant recipients, patients with hematologic malignancies, XP and field cancerization.     

Mining the Wheat Grain Proteome

Bread wheat is the most widely cultivated crop worldwide, used in the production of food products and a feed source for animals. Selection tools that can be applied early in the breeding cycle are needed to accelerate genetic gain for increased wheat production while maintaining or improving grain quality if demand from human population growth is to be fulfilled. Proteomics screening assays of wheat flour can assist breeders to select the best performing breeding lines and discard the worst lines. In this study, we optimised a robust LC–MS shotgun quantitative proteomics method to screen thousands of wheat genotypes. Using 6 cultivars and 4 replicates, we tested 3 resuspension ratios (50, 25, and 17 µL/mg), 2 extraction buffers (with urea or guanidine-hydrochloride), 3 sets of proteases (chymotrypsin, Glu-C, and trypsin/Lys-C), and multiple LC settings. Protein identifications by LC–MS/MS were used to select the best parameters. A total 8738 wheat proteins were identified. The best method was validated on an independent set of 96 cultivars and peptides quantities were normalised using sample weights, an internal standard, and quality controls. Data mining tools found particularly useful to explore the flour proteome are presented (UniProt Retrieve/ID mapping tool, KEGG, AgriGO, REVIGO, and Pathway Tools).     

Analysis of Integrin αIIb Subunit Dynamics Reveals Long-Range Effects of Missense Mutations on Calf Domains

Integrin α_IIbβ₃, a glycoprotein complex expressed at the platelet surface, is involved in platelet aggregation and contributes to primary haemostasis. Several integrin α_IIbβ₃ polymorphisms prevent the aggregation that causes haemorrhagic syndromes, such as Glanzmann thrombasthenia (GT). Access to 3D structure allows understanding the structural effects of polymorphisms related to GT. In a previous analysis using Molecular Dynamics (MD) simulations of α_IIb Calf-1 domain structure, it was observed that GT associated with single amino acid variation affects distant loops, but not the mutated position. In this study, experiments are extended to Calf-1, Thigh, and Calf-2 domains. Two loops in Calf-2 are unstructured and therefore are modelled expertly using biophysical restraints. Surprisingly, MD revealed the presence of rigid zones in these loops. Detailed analysis with structural alphabet, the Proteins Blocks (PBs), allowed observing local changes in highly flexible regions. The variant P741R located at C-terminal of Calf-1 revealed that the Calf-2 presence did not affect the results obtained with isolated Calf-1 domain. Simulations for Calf-1 + Calf-2, and Thigh + Calf-1 variant systems are designed to comprehend the impact of five single amino acid variations in these domains. Distant conformational changes are observed, thus highlighting the potential role of allostery in the structural basis of GT.     

Cell-Based Chemical Safety Assessment and Therapeutic Discovery Using Array-Based Sensors

Synthetic chemicals are widely used in food, agriculture, and medicine, making chemical safety assessments necessary for environmental exposure. In addition, the rapid determination of chemical drug efficacy and safety is a key step in therapeutic discoveries. Cell-based screening methods are non-invasive as compared with animal studies. Cellular phenotypic changes can also provide more sensitive indicators of chemical effects than conventional cell viability. Array-based cell sensors can be engineered to maximize sensitivity to changes in cell phenotypes, lowering the threshold for detecting cellular responses under external stimuli. Overall, array-based sensing can provide a robust strategy for both cell-based chemical risk assessments and therapeutics discovery.     

Identification of ritual blood in African artifacts using TOF-SIMS and synchrotron radiation microspectroscopies

A new protocol is implemented to demonstrate the presence of blood in the patina of African art objects from Mali. Divided into three steps, the protocol first consists in demonstrating the presence of proteins and localizing them in the sample's cross sections using time-of-flight secondary ion mass spectrometry (TOF-SIMS) and synchrotron-based infrared microspectrometry (microFT-IR). In a second time, TOF-SIMS is used to investigate heme, which is a blood marker. If heme is missing, which could mean that it is too degraded to be detected, X-ray microfluorescence (microXRF) and X-ray absorption near-edge microspectroscopy (microXANES) are used to prove the presence of iron in the protein area and to get a fingerprint of its chemical environment. This permits us thus to demonstrate that iron is indeed linked with proteins and not with mineral phases of the sample. Coupled with the ritual context of the objects, this constitutes a proof of the use of blood. Thanks to this protocol, which has the major advantage of avoiding false positive results, the presence of blood has been demonstrated in seven out of the eight studied samples.