Long-term effect of diesel degradation on polyoxymethylene at different temperatures

Diesel is an important fuel, partly because of the longevity and cleanliness of diesel engines. Often, polymers are in direct contact with diesel and understanding compatibility is critical. Polyoxymethylene (POM) is a thermoplastic used to manufacture automotive fuel pump gears and rotors due to its low coefficient of friction and thermal and dimensional stability. In this study, tensile tests were performed on plain and glass fiber reinforced (POM and POMGF) after immersion in diesel at different temperatures (−10°C, 23°C, and 60°C) for 1000, 2000, 3000, 5000, and 10 000 hour. A mathematical model was developed using data from just three tensile stress-strain curves obtained at two different fluid temperatures and three different immersion times. Model and experimental results show good agreement with one another for all conditions tested.     

Variational Foundations and Generalized Unified Theory of RVE-Based Multiscale Models

A unified variational theory is proposed for a general class of multiscale models based on the concept of Representative Volume Element. The entire theory lies on three fundamental principles: (1) kinematical admissibility, whereby the macro- and micro-scale kinematics are defined and linked in a physically meaningful way; (2) duality, through which the natures of the force- and stress-like quantities are uniquely identified as the duals (power-conjugates) of the adopted kinematical variables; and (3) the Principle of Multiscale Virtual Power, a generalization of the well-known Hill-Mandel Principle of Macrohomogeneity, from which equilibrium equations and homogenization relations for the force- and stress-like quantities are unequivocally obtained by straightforward variational arguments. The proposed theory provides a clear, logically-structured framework within which existing formulations can be rationally justified and new, more general multiscale models can be rigorously derived in well-defined steps. Its generality allows the treatment of problems involving phenomena as diverse as dynamics, higher order strain effects, material failure with kinematical discontinuities, fluid mechanics and coupled multi-physics. This is illustrated in a number of examples where a range of models is systematically derived by following the same steps. Due to the variational basis of the theory, the format in which derived models are presented is naturally well suited for discretization by finite element-based or related methods of numerical approximation. Numerical examples illustrate the use of resulting models, including a non-conventional failure-oriented model with discontinuous kinematics, in practical computations.     

A multivariate fuzzy c-means method

Fuzzy c-means (FCMs) is an important and popular unsupervised partitioning algorithm used in several application domains such as pattern recognition, machine learning and data mining. Although the FCM has shown good performance in detecting clusters, the membership values for each individual computed to each of the clusters cannot indicate how well the individuals are classified. In this paper, a new approach to handle the memberships based on the inherent information in each feature is presented. The algorithm produces a membership matrix for each individual, the membership values are between zero and one and measure the similarity of this individual to the center of each cluster according to each feature. These values can change at each iteration of the algorithm and they are different from one feature to another and from one cluster to another in order to increase the performance of the fuzzy c-means clustering algorithm. To obtain a fuzzy partition by class of the input data set, a way to compute the class membership values is also proposed in this work. Experiments with synthetic and real data sets show that the proposed approach produces good quality of clustering.     

Evaluation of realtime people tracking for indoor environments using ubiquitous motion sensors and limited wireless network infrastructure

We present the development and evaluation of a realtime indoor localisation system for tracking people. Our aim was to track a person’s indoor position using dead-reckoning, while limiting position error without depending on extensive wireless network infrastructure. The Indoor People Tracker used wearable motion sensors, a floor-plan map and a limited wireless sensor network for proximity ranging. We evaluated how the position accuracy of the Indoor People Tracker was affected by floor-plan map features, wireless proximity range and motion information. The advantage of the Indoor People Tracker was found; it was able to achieve accurate position resolution with minimal error, while not depending on wireless proximity.     

Experience with model-based performance, reliability, and adaptability assessment of a complex industrial architecture

In this paper, we report on our experience with the application of validated models to assess performance, reliability, and adaptability of a complex mission critical system that is being developed to dynamically monitor and control the position of an oil-drilling platform. We present real-time modeling results that show that all tasks are schedulable. We performed stochastic analysis of the distribution of task execution time as a function of the number of system interfaces. We report on the variability of task execution times for the expected system configurations. In addition, we have executed a system library for an important task inside the performance model simulator. We report on the measured algorithm convergence as a function of the number of vessel thrusters. We have also studied the system architecture adaptability by comparing the documented system architecture and the implemented source code. We report on the adaptability findings and the recommendations we were able to provide to the system’s architect. Finally, we have developed models of hardware and software reliability. We report on hardware and software reliability results based on the evaluation of the system architecture.     

Software reuse: The Brazilian industry scenario

This paper aims at identifying some of the key factors in adopting an organization-wide software reuse program. The factors are derived from practical experience reported by industry professionals, through a survey involving 57 Brazilian small, medium and large software organizations. Some of them produce software with commonality between applications, and have mature processes, while others successfully achieved reuse through isolated, ad hoc efforts. The paper compiles the answers from the survey participants, showing which factors were more associated with reuse success. Based on this relationship, a guide is presented, pointing out which factors should be more strongly considered by small, medium and large organizations attempting to establish a reuse program.     

A novel electromyographic signal simulator for muscle contraction studies

Mathematical simulation has been widely used in biomedical and biological sciences. In the case of the surface electromyographic (SEMG) activity, some models have been proposed aiming to study muscle contraction strategies that are used during different tasks and conditions. Most of SEMG simulators are based on energy modulation of a Gaussian noise. This work proposes a novel simulator in which the user-defined parameters are associated with the motor units (MUs) recruitment and their firing rate. Comparison between the mean spectrum of real SEMG signals collected in isometric contraction of the muscle biceps brachii and the mean spectrum obtained from simulated SEMG signals showed a good agreement, pointing the proposed simulator seems to be capable to generate consistent electromyographic signals in time and frequency domains and that can be used in many studies, in particular in the evaluation of automatic methods aimed to detect muscular contraction.     

New insights into the morphology of Trypanosoma cruzi reservosome

Reservosomes are late endosomes present only in members of the Schizotrypanum subgenus of the Trypanosoma genus and are defined as the site of storage of endocytosed macromolecules and lysosomal enzymes. They have been extensively described in Trypanosoma cruzi epimastigote: are bounded by a membrane unit, present an electron-dense protein matrix with electron-lucent lipid inclusions, being devoid of inner membranes. Here we performed a detailed ultrastructural analysis of these organelles using a variety of electron microscopy techniques, including ultrathin sectioning, uranyl acetate stained preparations, and freeze fracture, either in intact epimastigotes or in isolated reservosomes. New informations were obtained. First, both isolated and in situ reservosomes presented small profiles of inner membranes that are morphologically similar to the membrane surrounding the organelle. In uranyl acetate stained preparations, internal membrane profiles turned out to be longer than they appeared in ultrathin section images and traversed the organelle diameter. Internal vesicles were also found. Second, endocytosed cargo are not associated with internal vesicles and reach reservosomes on board of vesicles that fuse with the boundary membrane, delivering cargo directly into reservosome lumen. Third, electron-lucent bodies with saturated lipid core surrounded by a membrane monolayer and with unusual rectangular shape were also observed. Fourth, it was possible to demonstrate the presence of intramembranous particles on the E face of both internal vesicles and the surrounding membrane. Collectively, these results indicate that reservosomes have a complex internal structure, which may correlate with their multiple functions.     

Estimating vulnerability to risks: an application in a biofuel supply chain

In the present work, we propose a theoretical model to identify and prioritize risks involved in a biofuel supply chain. We adopt a set of indicators associated with determinant factors of the supply chain to identify risks that are characterized through a risk matrix. We consider the five largest world biodiesel producers and included China due to its global market importance and potential impacts of its growth on the environment and society. To determine the impacts and the probability of occurrence of risks, we use the Canberra distance, as metrics. To facilitate the analysis and interpretation, a convenient manner is to express the results in terms of matrices. To exemplify the potentiality of the scheme and for the sake of simplicity, a more comprehensive discussion is focused on the Brazilian case, restricted to the Technology and Innovation, and Integration, Logistics and Infrastructure determining factors (dimensions) of the biodiesel supply chain. Concerning these determining factors, the Brazilian biodiesel chain shows strong vulnerability when compared with developed and developing countries, despite that the evolution of the data over recent years indicates small improvements in Integration, Logistics and Infrastructure dimension. Although in this work the calculations are restricted to the Canberra distance, the present approach may be applied to other distances to compare or validate the results. This work presents a contribution to model vulnerability to risks, providing to policy makers and stakeholders a tool to design, analyze and improve sustainability system by measuring its risks. The study of the contribution of each indicator suggests corrections to be taken and which indicators should be prioritized.