Corrosion of zinc in simulated carbonated concrete pore solutions

The electrochemical behaviour of pure Zn and galvanized steel in solutions simulating the pore solution of carbonated concrete has been studied by means of potentiodynamic polarization tests and polarization resistance measurements. Pure Zn was chosen because it simulates well the behaviour of galvanized steel, yielding more reproducible results. The effect of different degrees of carbonation and the presence of different chloride contents in the simulated pore solutions was investigated. Results show that at a given pH (about 9.5) the corrosion susceptibility of Zn depends on anions concentration (carbonate and bicarbonate). The results obtained in simulated carbonated concrete pore solutions show that with low anion concentration Zn does not passivate while in presence of high levels of carbonate and bicarbonate the corrosion resistance is improved. Besides, the presence of chloride increases the corrosion susceptibility.     

Far-off and close-up dry matter intake modulate indicators of immunometabolic adaptations to lactation in subcutaneous adipose tissue of pasture-based transition dairy cows

The common practice of increasing dietary energy density during the close-up dry period (last ～3 wk prepartum) has been recently associated with a higher incidence of metabolic disorders after calving. Despite these reports, over-feeding of metabolizable energy (ME) during the far-off, nonlactating period is a common management policy aimed at achieving optimum calving body condition score (BCS) in pasture-based systems, as cows are generally thinner than total mixed ration cows at the end of lactation. Our hypothesis was that both far-off and close-up overfeeding influence the peripartum adipose tissue changes associated with energy balance and inflammatory state. Sixty mid-lactation, grazing dairy cows of mixed age and breed were randomly allocated to 1 of 2 groups that were managed through late lactation to achieve a low and high BCS (approximately 4.25 and 5.0 on a 10-point scale) at dry-off. The low BCS cows were then overfed ME to ensure that they achieved the same BCS as the higher BCS group by calving. Within each rate of BCS gain treatment, cows were offered 65, 90, or 120% of their pre-calving ME requirements for 3 wk pre-calving in a 2 × 3 factorial arrangement of treatments (i.e., 10 cows/treatment). Subcutaneous adipose tissue was collected via biopsy at ?1, 1, and 4 wk relative to parturition. Quantitative PCR was used to measure mRNA and microRNA expression of targets related to adipogenesis and inflammation. Cows overfed in the far-off period had increased expression of miR-143 and miR-378 prepartum (?1 wk) indicating greater adipogenesis, consistent with their rapid gain in BCS following dry-off. Furthermore, the lower postpartum expression of IL6, TNF, TLR4, TLR9, and miR-145, and a higher abundance of miR-99a indicated lower body fat mobilization in early lactation in the same group. In the close-up period, feeding either 65 or 120% of ME requirements caused changes in FASN, IL1B, IL6R, TLR9, and the microRNA miR-143, miR-155, and miR-378. Their respective expression patterns indicate a tentative negative-feedback mechanism in metabolically compromised, feed-restricted cows, and a possible immune-related stimulation of lipolysis in apparently static adipocytes in overfed cows. Data from cows fed 90% of ME requirements indicate the existence of a balance between lipolytic (inflammatory-related) and anti-lipolytic signals, to prime the mobilization machinery in light of imminent lactation. Overall, results indicate that far-off dry cow nutrition influences peripartum adipose tissue metabolism, with neither strategy negatively affecting the physiological adaptation to lactation. Furthermore, to ensure a favorable transition, cows should be subjected to a small feed restriction in the close-up period, irrespective of far-off nutritional management.     

A Sensitivity-Based Design Space Exploration Methodology for Embedded Systems

In this paper, we propose a system-level design methodology for the efficient exploration of the architectural parameters of the memory sub-systems, from the energy-delay joint perspective. The aim is to find the best configuration of the memory hierarchy without performing the exhaustive analysis of the parameters space. The target system architecture includes the processor, separated instruction and data caches, the main memory, and the system buses. To achieve a fast convergence toward the near-optimal configuration, the proposed methodology adopts an iterative local-search algorithm based on the sensitivity analysis of the cost function with respect to the tuning parameters of the memory sub-system architecture. The exploration strategy is based on the Energy-Delay Product (EDP) metric taking into consideration both performance and energy constraints. The effectiveness of the proposed methodology has been demonstrated through the design space exploration of a real-world case study: the optimization of the memory hierarchy of a MicroSPARC2-based system executing the set of Mediabench benchmarks for multimedia applications. Experimental results have shown an optimization speedup of 2 orders of magnitude with respect to the full search approach, while the near-optimal system-level configuration is characterized by a distance from the optimal full search configuration in the range of 2%.     

Enhanced field induced martensitic phase transition and magnetocaloric effect in Ni55Mn20Ga25 metallic foams

The high surface/volume ratio and mechanical stability under cyclic strain makes polycrystalline Ni–Mn–Ga metallic foams attractive for magnetic refrigeration. By means of comparison with a polycrystalline bulk material, we have demonstrated that the porous structure of Ni_54.8Mn_20.2Ga_25.0 open-cells metallic foams (porosity varying between 44% and 58%) reduces the temperature span of the phase transition and increases the magnetocaloric effect (MCE). MCE was investigated using calorimetry in a magnetic field. Temperature scan and isothermal experiments have shown a 0.8 K T^?1 shift of the phase transition temperature and a maximum irreversible entropy change of 2.5 Jkg^?1 K^?1. The results indicate that metallic foams can represent a good approach for enhancing field induced phase transitions in magnetic refrigeration applications.     

Melting of PCM in a thermal energy storage unit: Numerical investigation and effect of nanoparticle enhancement

The present paper describes the analysis of the melting process in a single vertical shell‐and‐tube latent heat thermal energy storage (LHTES), unit and it is directed at understanding the thermal performance of the system. The study is realized using a computational fluid‐dynamic (CFD) model that takes into account of the phase‐change phenomenon by means of the enthalpy method. Fluid flow is fully resolved in the liquid phase‐change material (PCM) in order to elucidate the role of natural convection. The unsteady evolution of the melting front and the velocity and temperature fields is detailed. Temperature profiles are analyzed and compared with experimental data available in the literature. Other relevant quantities are also monitored, including energy stored and heat flux exchanged between PCM and HTF. The results demonstrate that natural convection within PCM and inlet HTF temperature significantly affects the phase‐change process. Thermal enhancement through the dispersion of highly conductive nanoparticles in the base PCM is considered in the second part of the paper. Thermal behavior of the LHTES unit charged with nano‐enhanced PCM is numerically analyzed and compared with the original system configuration. Due to increase of thermal conductivity, augmented thermal performance is observed: melting time is reduced of 15% when nano‐enhanced PCM with particle volume fraction of 4% is adopted. Similar improvements of the heat transfer rate are also detected. Copyright © 2012 John Wiley & Sons, Ltd.     

Role of physical abnormalities in interpersonal perception and behavior.

Explores the impact of physical abnormalities on interpersonal relationships and investigates 1 technique available to the stigmatized to influence that impact. This technique is to indicate that the abnormality may be freely discussed or that it is a forbidden topic. The 60 male undergraduate Ss were introduced to an ostensibly naive student who was in reality a confederate and appeared either as an amputee in a wheelchair or as only slightly crippled. The shocks Ss were induced to administer the confederate were less painful when he was severely than when he was slightly crippled. It was concluded that all stigmata do not have the same interpersonal consequences and that the most marked effects occur for behaviors of which Ss have little awareness. (15 ref.) (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Industrial corrosion monitoring

The paper describes the experience accumulated on electrochemical methods for corrosion monitoring. Electrical resistance, linear polarization, electrochemical potential and amperometric measurements are described and their reliability is evaluated together with that of the related commercial equipments. The main drawbacks of each method (e.g. sensibility, linear or non linear response, causes of error and correction…) are discussed.