Ultralow-voltage boron-doped diamond field emitter vacuum diode

A boron-doped diamond field emitter diode with ultralow turn-on voltage and high emission current is reported. The diamond field emitter diode structure with a built-in cap was fabricated using molds and electrostatic bonding techniques. The emission current versus anode voltage of the capped diamond emitter diode with boron doping, sp² content, and vacuum thermal electric (VTE) treatment shows a very low turn-on voltage of 2 V. A high emission current of 1 μA at an anode voltage of less than 10 V can be obtained from a single diamond tip. The turn-on voltage is significantly lower than comparable silicon field emitters     

Gordon-Haus timing jitter reduction in dispersion-managed solitoncommunications

An analytic theory is presented which demonstrates that the noise induced Gordon-Haus timing jitter in arbitrary dispersion-managed transmission systems is reduced by the power-enhancement factor required to support a dispersion-managed solitons provided the path-average soliton period is much greater than the dispersion-map period. The analysis further predicts the behaviour of the amplitude, width, and quadratic chirp fluctuations due to the amplified spontaneous emission (ASE) noise     

Central motor conduction evaluation in glycogenosis type III

We report a 20-year-old man affected by glycogenosis type III with distal muscle weakness, more severe in distal leg muscles. The electromyogram showed myopathic features. Nerve conduction studies and central motor conduction after magnetic stimulation of the brain were normal. Our results suggest that there is no involvement of central motor pathways in this disease.     

Accuracy of using computed tomography to identify pedicle screw placement in cadaveric human lumbar spine

STUDY DESIGN: Utility of using computed tomography to predict pedicle screw misplacement. OBJECTIVE: This study defines the sensitivity and specificity of predicting pedicle screw placement by experienced clinicians using a CT scan image. SUMMARY OF BACKGROUND DATA: In clinical and research settings, the method most commonly used to evaluate pedicle screws placement has been computed tomography. However, no current literature describes the accuracy of this method of evaluating screw placement. METHOD: Cobalt-chrome and titanium alloy pedicle screws of identical size were placed in six cadaveric human lumbar spine. Wide laminectomy was performed to allow complete visualization of the pedicles. Three consecutive lumbar levels were instrumented in each spine, giving 36 pedicle screw placements to identify. The instrumented spines were imaged, and four orthopaedic spine surgeons and a musculoskeletal radiologist were asked to read the images to identify the accuracy of screw placement within the pedicles. RESULTS: The sensitivity rate of identifying a misplaced screw was 67 +/- 6% for cobalt-chrome screws compared with 86 +/- 5% for titanium screws (P < 0.005). The specificity rates of radiographic diagnosis of misplaced pedicle screws were 66 +/- 10% for cobalt-chrome screws and 88 +/- 8% for titanium screws (P < 0.005). Similarly, a statistically significant difference was found in the sensitivity rates of identifying screws placed correctly in the pedicle: 70 +/- 10% for cobalt-chrome screws versus 89 +/- 8% for titanium screws (P < 0.005). Overall accuracy rates were 68 +/- 7% for cobalt chrome screws versus 87 +/- 3% for titanium screws (P < 0.002). CONCLUSION: Reliance on the computed tomography scan data alone in determining accuracy of pedicle screws can lead to inaccuracies in both clinical and research conditions.     

Integrins and inside-out signal transduction: converging signals from PKC and PIP3

Recent studies have identified molecules that interact with integrins and appear to participate in the signaling pathways that regulate integrin adhesiveness. Clues provided by studies of these molecules point to the integration by integrins of signal transduction pathways implicated in cell division and activation.     

Three-dimensional reconstruction of live embryos using roboticmacroscope images

To determine the three-dimensional (3-D) shape of a live embryo is a technically challenging task. The authors show that reconstructions of live embryos can be done by collecting images from different viewing angles using a robotic macroscope, establishing point correspondences between these views by block matching, and using a new 3-D reconstruction algorithm that accommodates camera positioning errors. The algorithm assumes that the images are orthographic projections of the object and that the camera scaling factors are known. Point positions and camera errors are found simultaneously. Reconstructions of test objects and embryos show that meaningful reconstructions are possible only when camera positioning and alignment errors are accommodated since these errors can be substantial. Reconstructions of early-stage axolotl embryos were made from sets of 33 images. In a typical reconstruction, 781 points, each visible in at least three different views, were used to form 1511 triangles to represent the embryo surface. The resulting reconstruction had a mean radius of error of 0.27 pixels (1.1 μm). Mathematical properties of the reconstruction algorithm are identified and discussed     

Motion Perception Using Analog VLSI

Motion perception is arguably a fundamental mechanism used by natural species to accomplish a number of tasks, such as navigating freely in an unknown environment. Traditional motion perception methods tend to be computationally intensive, requiring powerful computers and large memories. However, by copying biological mechanisms, such as elementary motion discrimination at the early stages of the visual processing paths, it should be possible to build small and efficient motion perception systems. This paper describes the manner in which a simple motion perception model based on the insect visual system has been implemented using mixed analog/digital VLSI. The device has been fabricated in a 2 micron double metal, double polysilicon process, and comprises 61 photo-detectors, and associated analog and digital circuitry. While not entirely successful in that component mismatches hamper the detection of dark-to-bright changes in contrast, the results clearly show the feasibility of using such a device in autonomous control systems.