Mellin transform solution for the static line-source excitation ofa dielectric wedge

An integral transform analysis of the static scattering of the two-dimensional potential radiated by a line source in the vicinity of a penetrable wedge is presented. The Mellin transform is used to derive the exact static solution to Laplace's equation for the dielectric wedge, in the form of a modal series. The important dielectric edge condition behavior is explicitly contained in this analytic solution     

p53 oncogene in the laryngeal cancer

The effect of a novel flavonoid, venoruton (a mixture of mono-, di-, tri- and tetrahydroxyethylrutosides) has been investigated in healthy rat lenses and compared with diabetic cataract modelled in vitro. One mM venoruton was added to medium simulating healthy and diabetic conditions for the incubated lenses; damage was followed by either stereoscopic photography of the lenses under a Cooperative Cataract Research Group operating microscope or with our recently developed method: the leakage of lactate dehydrogenase (LDH) into the lens culture media. The increased LDH activity in the medium and observable development of the opacity were correlated with cell damage, which has been found to be associated with globular degeneration and cataract formation. The extent of opacification and LDH release is reduced if 1 mM venoruton is included in the medium. The protective effect may be related to antioxidant activity against reactive oxygen species: decreased luminol luminescence was shown after venoruton addition to either superoxide-generating hypoxanthine plus xanthine oxidase, or hydrogen peroxide.     

A comparison of two conformal methods for FDTD modeling

Two conformal finite-difference time-domain (FDTD) methods are considered, the contour path (CPFDTD) method of Jurgens et al. (see IEEE Trans. Antennas Propagat., vol.40, p.357, 1992) and the overlapping grid (OGFDTD) method of Yee et al. (see IEEE Trans. Antennas Propagat., vol.40, p.1068, 1992). Both TE and TM scattering from a two-dimensional (2-D), perfectly conducting circular cylinder are used to test the accuracy of the methods for curved surfaces. Also, TE and TM scattering from a 2-D, perfectly-conducting rotated square cylinder are used to test the accuracy for corners and edges. It is shown that the conformal method proposed by Yee et al. provide significant improvement in accuracy over the original FDTD algorithm for most of the geometries studied. However, implementation becomes more difficult as the geometries become more complex. The conformal method proposed by Jurgens et al. provide significant improvement in accuracy as well for most of the geometries studied. However, improvement does not occur for the TM case when the square cylinder is not aligned properly with the grid. Implementation of the CPFDTD method is relatively straightforward. For the majority of the cases studied, the OGFDTD method is more accurate than the CPFDTD method     

Tunable wavelength filters based on nonlinear optical interactionsin semiconductor amplifiers

A novel class of narrow-band tunable wavelength filters is proposed and evaluated. Wavelength selectivity of the proposed filters Is derived from the finite time response of an optical nonlinearity. The nonlinearity is gain saturation in semiconductor optical amplifier structures. The filters are shown to have very narrow passbands tunable over the entire semiconductor gain bandwidth. The key to filter implementation is a device configuration in which the wave-mixing products can be isolated from the amplified inputs. Three integrated optics compatible configurations are considered and shown to have high filter throughputs 34 to 180% and subangstrom bandwidths     

New concept for applying edge line phase-shifting masks to arbitrary mask layouts

This paper explains the principle of a method which avoids printing of phantom resist lines due to undesired intensity minima appearing on Cr-less edge line phase-shifting masks. The method combines principles of grey-tone lithography and attenuated phase-shifting masks to give, what we call, a Cr-Less Attenuated Phase-shifting mask (CLAP). Rules for generating a CLAP design and a paradigm setup of a CLAP mask are presented. The capabilities and possible limitations of the CLAP method based on simulated results for a standard wafer stepper setup using the SOLID lithography simulator are being assessed.     

Low-temperature phase transformation in Li-10 at. % Mg

It is not known whether impaired hematopoiesis noted during human immunodeficiency virus (HIV) infection results from infection of stem/progenitor cells or of cells of the bone marrow microenvironment. Normal adherent primary stromal layers were exposed to HIV to determine which of this mixture of endothelial cells, fibroblasts, and macrophages are susceptible to the virus. Viral p24 in supernatants was noted with monocytotropic HIV-1Ada, HIV-1Ba-L, and HIV-1JR-FL but not with lymphotropic HIV-1LAI nor HIV-1MN strain, and only stromal macrophages expressed the viral antigens. Coculture of the layers with PHA-activated normal lymphocytes failed to rescue lymphotropic virus. No p24 was produced when macrophage-depleted stromal cells were exposed to either HIV-1Ba-L or HIV-1LAI; proviral DNA was then amplified by PCR in cells exposed to either virus, though coculture with lymphocytes rescued only HIV-1Ba-L. Altogether, these data indicate that macrophages are the major targets of HIV in cultured stromal layers. As virus replication in macrophages did not affect the profile of major cytokines involved in regulating hematopoiesis, HIV infection could alter hematopoiesis by other as yet unspecified mechanisms.     

Monitoring systems and determination of actual fatigue usage

At GKN, fatigue monitoring of important components has been conducted since 1979. The monitoring methods depend on the mechanisms of damage; quasi-static loads are regarded as well as dynamic loads. The components were selected for monitoring on the basis of a system analysis. The data resulting from monitoring are used to optimise operation mode steadily. Experience shows that the use of monitoring data as input for fatigue assessment is the most realistic and cost-effective way. This fatigue assessment uses global and local sensitivity studies to evaluate the load-stress relation for each component. These relations can be programmed to produce stress vs. time curves. These are processed according to ASME rules to give a realistic fatigue usage.     

Magnetization and rotation of MTG HTSC ring in magnetic field

The magnetization of a melt-texture growth (MTG) HTSC ring has been studied. It is shown that the magnetic field inside the ring is larger than the external field under a certain range of external magnetic fields. We have also investigated the magnetic field dependence of the response of a detective coil near a rotating superconducting ring. The responses of the MTG sample are different for different cooling methods.     

Vibration of doubly-curved shallow shells

Summary This paper presents the free vibration of thin doubly-curved shallow shells of rectangular planform. The study covers wide combinations of free, simply supported and clamped boundary conditions. Both positive and negative Gaussian curvatures (spherical and hyperbolic paraboloidal shells resepectively) are considered. Thepb-2 Ritz energy based approach, along with the in-plane and transverse deflections assumed in the form of a product of mathematically complete two-dimensional orthogonal polynomials and a basic function, is employed to model the vibratory characteristic of these shells. Numerical results have been established through convergence study and comparison with published data from the open literature. Extensive sets of new results for various ranges of aspect ratio, curvature ratio andx- andy-shallowness ratios have been presented for future reference.