基于Delphi的报童模型的实现与动态仿真

已往库存论中的决策模型,它是把现实过程用数学的方法进行分析,得到决策值,但不能看到决策的过程,不能反映出现实生活中的不确定性、动态性。运用Delphi 7.0和SQL server 2000对销售过程进行了动态仿真,利用Newsboy模型的推广(S,s)订购策略来监控库存并做出决策,这样就体现出此过程的不确定性、动态性;且举出了一个仿真商品销售的实例,对其中的一些关键技术,如何仿真、算法的实现等进行了阐述。     

含V、N无缝钢管表面外折缺陷产生原因的分析

通过对鞍钢生产的部分批号V、N微合金强化无缝钢管及生产该钢管的原料连铸坯和连轧管坯的表面缺陷进行研究，分析了含V、N钢管表面外折缺陷的成因，提出了改善钢管表面质量的方法。采用改进后工艺生产的无缝管，其表面外折废品量大幅度降低。     

我国矿业城市实现可持续发展的途径分析

详细分析我国矿业城市可持续发展所面临的社会、经济、资源和生态环境等问题，提出了我国矿业城市应树立可持续发展目标及其内涵，系统分析矿业城市可持续发展的结构和模式，结合我国矿业城市发展存在的主要问题，以矿业城市可持续发展理念为指导，提出我国矿业城市实现可持续发展的途径及其建议。     

Synthesis and characterization of molybdenum disulphide formed from ammonium tetrathiomolybdate

An investigation has been carried out into the possibility of in situ formation of MoS2 within porous anodic films on aluminium, to improve subsequent tribological behaviour, by re-anodizing in thiomolybdate electrolyte. Acidification of thiomolybdate was employed to simulate the conditions for formation of the sulphide at the anodic film/electrolyte interface, followed by appropriate vacuum heat treatments to study possible temperature effects on the sulphide due to either friction or Joule heating during anodizing. The products of both acidification and heat treatment, characterized by X-ray powder diffraction and scanning electron microscopy, were compared with those formed by direct thermal decomposition of ammonium tetrathiomolybdate crystals. The precipitate formed by acidification was mainly amorphous molybdenum trisulphide (MoS3), which on heat treatment at 450 and 850°C yielded 3R-MoS2. 3R-MoS2 also formed by the thermal decomposition of thiomolybdate crystals. Thermogravimetric and differential thermal analyses showed that the decomposition of MoS3 to MoS2 occurred in the range 220–370°C and revealed the sequence of reaction steps. The findings suggest that mainly amorphous MoS3 is formed as a consequence of changes in the pH of the film/electrolyte interface during re-anodizing but the product is relatively easily transformed to crystalline MoS2 on moderate heating which may occur during wear processes.     

激光辐照制备搪瓷涂层

激光辐照制备的搪瓷涂层表面粗糙,与金属基材结合牢固。一般由 Si,Al,Na,K,B,F,O等元素组成。在激光辐照过程中 K,Na 明显地挥发,从而在涂层中的含量明显减少;Co,Ni,主要分布在界面附近;Fe 元素也由基材进入涂层,呈梯度状分布,在界面过渡区含量很高,在涂层内含量很低。搪瓷涂层的形成与激光辐照参数,特别与激光功率间存在极为密切的关系;只有选用合理的参数,才能制得搪瓷涂层。     

浅谈21世纪新建电厂热控系统的规划设计

为了适应电力工业发展和国家新兴产业政策的需要,本文扼要介绍了21世纪新建电厂在热控系统的规划设计方面应做的改进和注意的问题.并在此基础上阐述了一些个人的观点和看法供管理、设计和技术人员参考.     

UHE电炉炼钢的冶炼工艺特点及其发展的几个问题

从实践上论述了UHE电弧炉炼钢的工艺特点,提出UHE电炉的“新三期”的新观点,并作了定量的描述;对正在发展中的UHE电炉工艺与设备提出了策略性的意见.     

通用串行总线(USB)数据传输模型

USB作为一种数据传输接口，了解它的通信传输机制是正确利用USB利用数据传输的基础，分层次结构对USB数据传输模型加以分析，可以使读者建立起USB体系结构、通信模型和总线事务的框架和概念，并最终对USB传输工作流程有一个清晰的认识。     

纳米聚N-异丙基丙烯酰胺微凝胶的光引发聚合

选择具有温敏性的高分子单体N－异丙基丙烯酰胺（N－isopropylacrylamide，NIPAM）为主单体，N，N′－亚甲基双丙烯酰胺（methylenebisacrylamide，MBA）为交联剂，运用光引发无皂乳液聚合的方法合成出粒径小于100nm的高分子微凝胶，并研究了在改变体系组成和条件时微凝胶粒径的变化。结果显示，在乳化剂临界胶束浓度以下，随着乳化剂浓度的提高，微凝胶粒子的粒径不断关小且趋向稳定；相比于热引发，产生的微凝胶具有较高的单分散性而且粒径较小。     

Sensitizing Mechanism and Adsorption Properties of Dye—Sensitized TiO2 Thin Films

The dye-sensitized TiO2 complex films were prepared by the dye coat onto TiO2 surfaces,and the sensitizing mechanism and adsorption properties of the dye-sensitized TiO2 complex films were inverstigated.The influence of the application conditions of dye adsorbed on TiO2 films on the amount of dye adsorption was discussed.Experimental results show that the concentration,the temperature of dye solutions and the dipping time of TiO2 films in the dye solutions have a significant influence on the amount of dye adsorption.Cell test indicates that the conversion efficiency of light to electricity increases with the amount of dye adsorption.