高精度快速可控光纤真延迟线实验研究

在相控阵雷达中使用光纤实时延迟技术,可实现大角度瞬时宽带扫描.利用半导体光放大器和法拉第旋转镜实现了快速切换的延迟线,此技术具有切换速度快,延迟精度高,输出功率恒定,偏振不相关等优点.实验结果表明,此结构能够实现1 ps的延时精度,误差不超过0.1 ps.     

2，4-二氯苯乙酮合成工艺的研究

以间-二氯苯为原料,乙酸酐为酰化试剂,合成2,4-二氯苯乙酮.考察影响酰化反应的主要因素,结果表明最适宜的反应条件是:间-二氯苯:乙酸酐的摩尔比为2:1,缓慢滴加乙酸酐时温度保持在50℃左右(低于60℃),然后回流反应温度上升至90～95℃,搅拌并保持约2.5h,最终所得产品收率可达81.8%.     

A novel distributed approach to robust fault detection and identification

In this paper, we propose a novel distributed robust fault detection and identification (RFDI) scheme for a class of nonlinear systems. Firstly, a detection and identification estimator—robust fault tracking approximator (RFTA) is designed for online health monitoring. A novel feature of the RFTA is that it can simultaneously detect and accurately identify the shape and magnitude of the fault and disturbance. Moreover, it takes less online training time compared with the traditional neural network based fault diagnosis schemes. For some distributed systems, a network of distributed estimators is constructed where the RFTA is embedded into each estimator. Then we use consensus filter to filter the outputs of each estimator. One of the most important merits of the consensus filter is that its outputs can dramatically improve the accuracy of fault detection and identification. Next, the stability of the distributed RFDI scheme is rigorously investigated. Finally, two numerical examples are given to illustrate the feasibility and effectiveness of the proposed approach.     

偏高岭土的研究现状及展望

简要介绍了偏高岭土的反应机理和在国内外的研究现状。同时对偏高岭土的研究进行了展望 ,提出因麦特林水泥原料丰富 ,污染小 ,加工简单 ,性能优越 ,其应用前景广阔 ,应对其加强研究。     

Synthesis and characterization of molybdenum disulphide formed from ammonium tetrathiomolybdate

An investigation has been carried out into the possibility of in situ formation of MoS2 within porous anodic films on aluminium, to improve subsequent tribological behaviour, by re-anodizing in thiomolybdate electrolyte. Acidification of thiomolybdate was employed to simulate the conditions for formation of the sulphide at the anodic film/electrolyte interface, followed by appropriate vacuum heat treatments to study possible temperature effects on the sulphide due to either friction or Joule heating during anodizing. The products of both acidification and heat treatment, characterized by X-ray powder diffraction and scanning electron microscopy, were compared with those formed by direct thermal decomposition of ammonium tetrathiomolybdate crystals. The precipitate formed by acidification was mainly amorphous molybdenum trisulphide (MoS3), which on heat treatment at 450 and 850°C yielded 3R-MoS2. 3R-MoS2 also formed by the thermal decomposition of thiomolybdate crystals. Thermogravimetric and differential thermal analyses showed that the decomposition of MoS3 to MoS2 occurred in the range 220–370°C and revealed the sequence of reaction steps. The findings suggest that mainly amorphous MoS3 is formed as a consequence of changes in the pH of the film/electrolyte interface during re-anodizing but the product is relatively easily transformed to crystalline MoS2 on moderate heating which may occur during wear processes.     

槽孔式水力驱动控制棒槽孔阻力系数实验研究

对槽孔式水力驱动控制棒槽对孔阻力系数进行了大量实验研究，获得了槽孔式水力驱动控制棒槽对孔阻力系数和其随槽对孔位移的变化规律，分析了槽对孔阻力系数与控制棒槽对孔结构参数之间的关系。结果表明：随槽对孔位移的增加，槽对孔阻力系数从某一较大的定值迅速降低到某一较小的定值，然后再迅速反回到初始的定值，形成一个对称的宽幅波谷；槽高使阻力系数曲线波谷幅宽发生变化，也使完全不重合段的阻力系数发生变化；随内套孔径的增大，阻力系数有所降低，其对阻力系数的影响也进一步减弱。孔径增大到一定程度，阻力系数基本不受孔径参数的影响。     

纳米聚N-异丙基丙烯酰胺微凝胶的光引发聚合

选择具有温敏性的高分子单体N－异丙基丙烯酰胺（N－isopropylacrylamide，NIPAM）为主单体，N，N′－亚甲基双丙烯酰胺（methylenebisacrylamide，MBA）为交联剂，运用光引发无皂乳液聚合的方法合成出粒径小于100nm的高分子微凝胶，并研究了在改变体系组成和条件时微凝胶粒径的变化。结果显示，在乳化剂临界胶束浓度以下，随着乳化剂浓度的提高，微凝胶粒子的粒径不断关小且趋向稳定；相比于热引发，产生的微凝胶具有较高的单分散性而且粒径较小。     

Sensitizing Mechanism and Adsorption Properties of Dye—Sensitized TiO2 Thin Films

The dye-sensitized TiO2 complex films were prepared by the dye coat onto TiO2 surfaces,and the sensitizing mechanism and adsorption properties of the dye-sensitized TiO2 complex films were inverstigated.The influence of the application conditions of dye adsorbed on TiO2 films on the amount of dye adsorption was discussed.Experimental results show that the concentration,the temperature of dye solutions and the dipping time of TiO2 films in the dye solutions have a significant influence on the amount of dye adsorption.Cell test indicates that the conversion efficiency of light to electricity increases with the amount of dye adsorption.     

超薄SiO2层的热生长

隧道小孔中超薄ＳｉＯ２的生长是ＥＥＰＲＯＭ电路制造的关键工艺之一。采用ＳＵＰＲＥＭ－Ⅲ工艺模拟程序对超薄ＳｉＯ２的热生长进行了工艺模拟，经过大量的工艺实验及优化，确定了超薄ＳｉＯ２的最佳生长条件，生长出的ＳｉＯ２性能良好，完全可满足ＥＥＰＲＯＭ研制的要求。     

微机字处理网络系统智能接口的设计

本文介绍了微机字处理系统网络联机的智能接口设计方案，采用比较简单而独特的手法，解决了通信控制和资源共享问题．