面向特征的STEP-NC加工方法研究

介绍了STEP-NC数据结构的基本特征，分析了STEP-NC控制器的功能结构，研究了从STEP-NC文件中直接提取制造信息并在实验平台上进行实际加工的基本方法，建立了基于特征的数控加工系统，提出了相应的实现方法和技术。最后在VC＋＋6．0和ST-Developer10集成环境下，利用开放式三维实验平台提供的运动控制器函数库和动态连接库，开发了一个基本的STEP-NC控制平台，其基本功能包括STEP-NC文件的翻译、制造信息的提取、执行和控制等，并能以特征为单位进行加工实验。     

The Inventory for Chinese LFC in 2006

1. Introduction Lost Foam Casting has been introduced into China for two decades, and it is getting more popularity in foundry industry.In China there are two associations responsible for the LFC industry and academic exchanges: Chinese Lost Foam Casting Society (CLFCS) and Chinese Association of Full Mold Casting.     

层流冷却工艺在首钢迁钢热轧分厂的应用

介绍了首钢迁钢公司2160热轧分厂层流冷却的工艺布置、冷却区的结构组成、操作模式、冷却制度及冷却系统的控制功能。该系统投产后，带材的卷取温度偏差可控制在±8℃以内，且96．8％的产品卷取温度偏差可控制在±5℃内，从而有利于提高产品的性能和表面质量，也为生产高质量的产品打下坚实基础。     

Structure and Properties Characterization of Ceramic Coatings Produced on Steel Using a Combined Technique

STEEL is the most widely used material in engineering,but unfortunately,steel exhibits poor wear resistanceand obvious contact corrosion.For decades,researchersprepared coatings on steel to improve its properties;ceramic is one of these coatings.To obtain ceramiccoatings on steel,many researchers use techniques suchas plasma spraying,laser cladding,etc.,but some ofthem are too expensive,some of them have a deep heataffected zone in the substrate,and some of them cannot bond well with the subs…     

DISTRIBUTION AND EFFECT OF Ce IN RE BEARING DUCTILE IRON

The dependence of nodularization of graphite upon Ce content in RE bearing nodular castiron,prepared by directional solidification,has been investigated by electrolyticextraction-radioisotope assay analysis of Ce in each phase of the iron together withmeasurement of nodulized graphite.Results show that the Ce occurs mainly as alloyed form.In the graphite phase,the Ce content is believed to be characterization of nodularization.Thegraphite would completely nodulized only the Ce is over a certain content in graphite phase.     

PREPARATION OF TiN FILMS BY N_2 ASSISTED Xe~+ ION BEAM ENHANCED DEPOSITION AND THEIR MECHANICAL PROPERTIES

A new method for preparation of hard TiN films has been developed by using electronbeam evaporation-deposition of Ti and bombardment with 40 keV Xe~+ ion beam ina N_2 gas environment.The synthesized TiN films were superior to PVD and CVDones in respects of improved adhesion to substrate and low preparing temperature.Theyexhibited good wear resistance and high hardness up to 2200 kg/mm~2.Some industrialapplications have been reported.     

我国中厚板生产技术进步20年

综述了近 2 0年来我国中厚板生产技术的发展历程 ;并对其生产力、装备水平的提高 ,新工艺技术、自动控制系统的运用及产品开发等方面进行了较详细的分析和介绍     

MICROSTRUCTURE STUDY OF CONSTITUENT PHASES IN 2024 SERIES Al ALLOYS

X-ray microanalysis,convergent beam electron diffraction(CBD)and selected area electrondiffraction(SAD)studies on the structures and compositions of the constituent phases in2024 series Al alloys have been conducted.Partial substitution of alloying elements is found tooccur in all the constituent phases,which cause small deviations from the stoichiometric com-positions reported in these ternary compounds.The dominant phase is α-Al_(12)(FeMn)_3Si whichhas a body center cubic crystal structure with the Im■ space group and a=1.25 nm.The nextdominant phase is Cu_2FeAl_7 which has a primitive tetragonal crystal structure with theP4/mnc space group and a=0.6336 nm,c=1.487 nm.The minor phase is α'-Al_(12)Fe_3Si hav-ing α primitive cubic crystal structure with the Pm■ space group and α=1.27 nm.     

Structural stability of single-layered LaNi4.25Al0.75 film and its electrochemical hydrogen-storage properties

AB5-based hydrogen storage thin fdms （LaNi4.25Al0.75）, deposited on Cu substrate by dc magnetron sputtering were investigated in this study. X-ray diffraction （XRD） revealed that the microstructure of the layer was in crystal form. SEM and AFM analyses proved that the film appeared to be rather rough with numerous randomly sized pores of approximately 15-40 in nm diameter. Structural stability of the film was examined by the combined analyses of DSC, XRD, and SEM, which indicated that this film maintained its structural stability below 500 K or so, and a network structure was observed on the film after being heated at 700 K for 30 min. Electrochemical hydrogen-storage properties of the films were investigated by simulated battery tests. It was found that single-layered LaNi4.25A10.75 film exhibited electrochemical hydrogen-storage properties similar to typical AB5 alloys in bulk, and the maximum discharge capacity of the film was about 220 mAh/g. After 20 charge/discharge cycles, small needle-shaped aluminium oxide was formed on some fractions of the film surface.     

有机涂层钢板生产线主要工艺

介绍了有机涂层钢板生产线上钢基板的预处理,全线张力控制,纠偏装置的布置,固化炉的选型.