TiC-MoSi_2复合材料的原位合成及其低温氧化特性

为了改善MoSi2力学性能和低温抗氧化性能,选用TiC颗粒来增强补韧MoSi2,通过XRD和SEM表征合成MoSi2基复合材料的微观结构并研究了预氧化对MoSi2基复合材料低温抗氧化性能的影响.结果表明,采用Mo、Si、Ti、C粉末可以自蔓延原位合成20 v01%TiC-MoSi2复合材料.复合材料在500℃氧化240 h增重1.261 mg·cm-2,氧化动力学呈线性关系,生成疏松多孔的氧化层导致"粉化"现象发生.经1200℃预氧化处理,20 v01%TiC-MoSi2复合材料在500℃氧化240 h增重4.83×10-mg·cm-2.预氧化处理后的材料表面形成致密的TiO2和SiO2复合膜抑制了TiC-MoSi2材料出现低温"粉化"现象.     

Enhanced stability of recombinant keratinocyte growth factor by mutagenesis

Native sequence keratinocyte growth factor (KGF) is fairly unstable, as manifested by the loss of the monomeric native protein accompanied by the accumulation of aggregated species during storage at moderate temperatures. Several different types of analogs were generated and the storage stability of the protein assessed. In the first type of analog one or more of the five cysteinyl residues in KGF were replaced; in the second class the N-terminal residues that included the first disulfide bond were deleted. Both of these types of analogs involved removal of the disulfide bond between cysteines 1 and 15. The third group involved mutating one of the basic amino acids located in a cluster of positive charges (involved in heparin binding) around Arg144 to a neutral or acidic amino acyl residue. Among the cysteine replacement analogs, the double mutation of Cys1 and 15 to Ser resulted in significantly increased stability without compromising the mitogenic activity, while Cys to Ser mutations at other positions were either destabilizing or had no effect. Deletion of the 15, 23 or 27 N-terminal amino acyl residues also increased the stability of the protein. The activity of the analogs was not affected by the deletion of 15 or 23 amino acids, but it was significantly decreased upon removal of the 27 N-terminal amino acyl residues. Much greater stability was achieved by mutation of the basic amino acids, especially Arg144, to Glu or Gln, but this increase in stability was accompanied by large decrease in activity. The analog with the 23 N-terminal amino acyl residues deleted represents one of the best compromises between increased stability and retention of activity.     

The consequences of lysosomotropism on the design of selective cathepsin K inhibitors

Many drug candidates contain a basic functional group that results in lysosomotropism--the accumulation of drug in the acidic lysosomes of a cell. When evaluating inhibitors of lysosomal enzymes, such as the cathepsins, this physical property can have a dramatic impact on the functional selectivity of the test compounds. A basic P3 substituent in cathepsin K inhibitors provides a means of achieving potent and selective enzyme inhibition. To evaluate the whole-cell selectivity of the basic cathepsin K inhibitor L-006235, we identified the irreversible pan-selective cathepsin probe BIL-DMK and used it to design whole-cell enzyme-occupancy assays. These cell-based assays showed a dramatic reduction in selectivity against cathepsins B, L, and S relative to the selectivities observed in enzyme assays. Two-photon confocal fluorescence microscopy showed punctated subcellular localization of L-006235, which colocalized with BODIPY-labelled Lysotracker, consistent with compound lysosomotropism. To address this potential problem, a series of potent cathepsin K inhibitors was developed by replacing the P2--P3 amide bond with a metabolically stable trifluoroethylamine moiety. X-ray crystallography has identified the binding of this functional group to active-site residues in cathepsin K. This modification resulted in increased potency and selectivity that allowed the removal of the basic P3 substituent. The resulting nonbasic inhibitor L-873724 is a 0.2 nM inhibitor of cathepsin K with cathepsin B, L, and S potencies that were not shifted between purified enzyme and whole-cell assays; thus indicating that this compound is not lysosomotropic. L-873724 exhibits excellent pharmacokinetics and is orally active in a monkey model of osteoporosis at 3 mg kg(-1) q.d.     

计算机辅助设计在建筑安全玻璃加工中的应用

本文以北京天文馆的“复杂并形曲面夹层中空玻璃”为例，介绍如何根据玻璃的三雏效果图利用计算机辅助设计来模拟展开空间曲面玻璃。如何绘制切割文件进行玻璃切割；如何根据玻璃的三维效果图利用计算机辅助设计来分割曲面玻璃。进行模具的加工等。     

4G云导航在船联网中的应用研究

从内河航运智能化建设的需要出发,将4G、云计算和物联网的概念引入航运业。4G具有传输速度快、智能性高、无缝漫游与通信方式灵活的技术特点。通过船联网的组织构成,阐述了4G技术在其中的作用,作为物联网在内河航运的延伸,船联网具有物联网的所有特征。围绕在线云导航、视频监控、应急救援和智能航运管理4个方面的应用,具体分析了4G网络平台下船联网实现的目标,并就4G网络和船联网在建设过程中的安全性分析提出了解决方案,最后,从国家战略性新兴产业角度,阐述了其未来广阔的发展前景。     

Trace metals and organochlorines in the bamboo shark Chiloscyllium plagiosum from the southern waters of Hong Kong, China

The bamboo shark Chiloscyllium plagiosum is an abundant benthic species along the shallow continental shelf of Southeast Asia. It is commonly taken by fishermen in China, India, Taiwan and Thailand for human consumption. This study measured trace metal and organochlorine concentrations in C. plagiosum collected from the southern waters of Hong Kong, China. Metals (Ag, Cd, Cr, Cu, Mn, Ni, Pb and Zn) were measured in three different tissues: dorsal muscle, spleen and liver. Polychlorinated biphenyls (PCBs) and chlorinated pesticides in the dorsal muscle were identified and quantified using gas chromatography. Metal concentrations varied among the three different tissues, with liver having higher levels of Ag and Cd, and spleen possessing higher levels of Cu and Mn. Both Ni and Pb in all tissues were below the detection limit. Tissue concentrations of Cr, Cu, Mn and Zn generally decreased with increasing body weight whilst no significant concentration-size relationship was found for other metals. In muscle tissues, total PCBs ranged from 1.056-4.771 ng/g (wet wt.) with a median of 1.801 ng/g, while total DDTs ranged from 0.602-23.55 ng/g with a median of 1.109 ng/g, in which p,p'-DDE was the predominant metabolite. Levels of total hexachlorohexanes and cyclodienes were low. The pesticide p,p'-DDT was the only compound found to be positively correlated with body weight, indicating temporal bioaccumulation of this compound. Zn concentrations in the muscle of C. plagiosum were comparatively higher than recorded in other shark species, however, concentrations of other metals and organochlorines were relatively low. C. plagiosum feeds primarily on polychaetes, shrimps and small fishes, and thus is unlikely to contain levels of contaminants of human health concern.     

Transducing mechanical force by use of a diffraction grating sensor

A novel means of transducing mechanical force by using a polymeric-based diffractive grating sensor is presented. The diffraction gratings are successfully fabricated upon poly(dimethyl siloxane) polymer substrates by holographic interference and micromolding. A micromaterial tensile test incorporated into the surface diffraction grating experiment showed that a relationship between the load and the observed diffraction-pattern shift could be obtained. The results show an excellent correlation between the optical measurement and load, with a sensitivity of 0.05 N.     

Fabrication of polymer waveguides by a replication method

We have developed a soft-lithography method to replicate polymer waveguides. In this method, the waveguides are produced by a two-step molding process where a master mold is first formed on a negative-tone photoresist and subsequently transferred to a polydimethylsiloxane (PDMS) mold; a PDMS silicone rubber mold is then used as a stamp to transfer the final waveguide pattern onto an UV cure epoxy. Initial results show good pattern transferring in physical shape. The optical performance is measured based on the propagation loss. In our design, the loss was measured at 0.28 dB/cm for 1.3 microm and 0.26 dB/cm for 1.55 microm.     

Enhancement of amino acid detection and quantification by electrospray ionization mass spectrometry

A new strategy for amino acid analysis is reported involving derivatization with an N-hydroxysuccinimide ester of N-alkylnicotinic acid (Cn-NA-NHS) followed by reversed-phase chromatography and electrospray ionization mass spectrometry (RPC-MS). Detection sensitivity increased as the N-alkyl chain length of the nicotinic acid derivatizing agent was increased from 1 to 4. N-Acylation of amino acids with the Cn-NA-NHS reagents in water produced a stable product in roughly 1 min using a 4-fold molar excess of derivatizing agent in 0.1 M sodium borate buffer at pH values ranging from 8.5 to 10. Some O-acylation of tyrosine was also observed, but the product hydrolyzed within a few minutes at pH 10. The cystine product also degraded slowly over the course of a few days from reduction of the disulfide bond to form cysteine. The retention time of Cn-NA derivatized amino acids was lengthened in reversed-phase chromatography to the extent that polar amino acids were retained beyond the solvent peak, particularly in the cases of the C3-NA and C4-NA derivatives. Complete resolution of 18 amino acids was achieved in 28 min using the C4-NA-NHS reagent. Compared to N-acylation with benzoic acid, derivatization with C4-NA-NHS increased MS detection sensitivity 6-80-fold. This was attributed to the surfactant properties of the Cn-NA-NHS reagents. The quaternary amine increased the charge on amino acid conjugates while the presence of an adjacent alkyl chain further increased ionization efficiency by apparently enhancing amino acid migration to the surface of electrospray droplets. Further modification of the Cn-NA-NHS reagents with deuterium was used to prepare coded sets of derivatizing agents. These coding agents were used to differentially code samples and after mixing carry out comparative concentration measurements between samples using extracted ion chromatograms to estimate relative peak areas of derivatized amino acids.     

Novel expansion/shrinkage modulation of 2D layered MOF triggered by clathrate formation with CO(2) molecules

Crystal-to-crystal transformation from a 3D interpenetrated-type MOF {[Cu(BF(4))(2)(bpy)(H(2)O)(2)] (bpy)} (1) to a 2D square-grid-type [Cu(BF(4))(2)(bpy)(2)] (2) (bpy = 4,4'-bipyridine) was observed. It was derived from dehydration and confirmed by in situ FT-IR, TG, and elemental analysis. Moreover, we elucidate the novel expansion/shrinkage dynamic modulation of 2 triggered by clathrate formation with gas molecules.