读者决策采购（PDA）成功实施的关键性因素分析

读者决策采购作为一种全新的基于读者需求的资源建设模式,目前国内还没有高校图书馆实施。介绍了读者决策采购面临的问题,提出PDA要在我国高校图书馆成功实施,需制定严格的标准、选择合适书商并及时进行跟踪与评价。     

智能投币机在城市公交上使用的改进分析

通过鱼骨图的方法对现有智能公交投币机存在识别率偏低的问题进行了分析,提出在智能投币机中采用闭式五角叶轮或增加硬币预处理部分,对现有的智能公交投币机进行改进,使智能公交投币机的硬币辨识率得到提高.     

导磁体在汽车零件感应加热中的应用技术

本文简单介绍了导磁体工作的基本原理，并给出在汽车零件大规模生产中所积累的导磁体应用的一些经验，以阐明如何更有效地使用导磁体。     

Large magnetic-field-induced strains in rare earth polycrystalline Ni-Mn-Ga

The magnetic-field-induced strains (MFIS) of polycrystalline Ni50Mn29Ga21 alloys containing Tb were studied. A large MFIS of-1.10% was obtained under compressive prestress conditions. The addition of Tb can fine the crystal grains, enhance the bending strength obviously, and make MFIS increase further, indicating that a moderate amount of Tb does not hinder twin boundary motion and it conversely makes the material more practical.     

A novel electroless silver depositing method for magnesium alloys

Depositing silver on magnesium alloy by both electroless plating and organic coatings was studied. The organic coating was made by immersing samples in organosilicon heat-resisting varnish. In this method the organic coating acts as interlayer between the substrate and silver film. When the reaction starts, silver deposits directly on the interlayer. X-ray diffraction and SEM analysis were used to determine the composition and morphology of the interlayer and silver film. The potentiodynamic polarization curves for corrosion studies of coated magnesium alloys were performed in a corrosive environment of 3.5% NaCl（mass fraction） at neutral pH （6.9）. The results indicate that compared with the substrate, the corrosion resistance of coated magnesium alloys increases greatly. Moreover, the method proposed in this work is environmentally friendly, non-toxic chemicals were used. In addition, it provides a new concept for the corrosion inhibition of magnesium alloys.     

氩弧焊未熔合缺陷的定位分析

氩弧焊在压力容器制造行业运用越来越广泛.正确检出氩弧焊焊接缺陷的位置,不仅能保证设备的安全运行,而且可以节约人力、材料、能源和缩短工期.当采用射线方法检测氩弧焊焊缝质量时,可通过X光底片判断缺陷的埋藏深度.……     

AN APPROACH TO THE ACTIVATION PROCESS OF LaNi_5

本文研究了LaNi_5在不同温度和压力下的活化过程。结果表明,LaNi_5的活化可分为三个阶段,即孕育期;吸氢速度随时间增加而增加的第一阶段和吸氢速度随时间增加而减少的第二阶段。讨论了每一阶段的特征,并给出了吸氢速度的近似表达式。     

射线检测中运动模糊图像的恢复

X射线实时成像检测中,若曝光时间内工件和X射线图像采集设备有相对线性运动,会造成图像运动模糊降质。提出利用运动模糊点扩展函数的频域特征和Hough变换得到模糊图像的运动方向,并将之旋转到水平轴方向,利用差分法求解运动模糊点扩展函数的长度。并用Wiener滤波的方法,恢复降质的图像,取得了较好的效果。     

机械零件刚度的模糊可靠性设计

介绍了机械零件刚度模糊可靠性设计变形分布参数和刚度隶属函数的确定,导出了零件刚度模糊可靠度的计算公式,并通过机床主轴模糊可靠性设计实例说明机械零件模糊可靠性的计算方法.     

含Cl^-溶液中SO4^2-对316不锈钢临界点蚀温度的影响

采用外加恒电位下腐蚀电流-温度扫描方法研究了在0．5％Cl^-溶液中，SO4^2-浓度对316不锈钢点腐蚀行为的影响．结果表明，随着SO4^2-浓度的增加，钝化电流增加，开路电位降低．当SO4^2-浓度低于0．42％时，316不锈钢的临界点蚀温度比不存在SO4^2-时的临界点蚀温度低；当SO4^2-浓度大于0．42％时，临界点蚀温度比不存在SO4^2-时的临界点蚀温度高．从离子竞争吸附的角度进行分析，对SO4^2-加速与抑制点蚀两种作用规律的形成原因进行了解释．