Mikromethode zur quantitativen Bestimmung von Coffein

Zusammenfassung Zur quantitativen Bestimmung von Coffein in biologischem Material wird ein kombiniertes Verfahren aus Dünnschichtchromatographie und Densitometrie beschrieben. Das Verfahren läßt Bestimmungen im Nanogramm-Bereich zu. Das Probenvolumen liegt unter 100 l.Die Proben — Capillarblut — werden zunächst mit dem gleichen Volumen Chloroform extrahiert. Anschließend wird das Coffein mittels Dünnschichtchromatographie von Begleitstoffen und störenden Substanzen abgetrennt. Es werden Kieselgel-60-Fertigplatten und Chlorofom/Aceton (9 + 1; v/v) als Fließmittel verwendet, dabei beträgt die Laufzeit 30 min.Die quantitative densitometrische Auswertung erfolgt durch Remissionsmessung bei 273 nm. Im Bereich von 10–60 ng Coffein/Fleck verläuft die Eichkurve linear. 1 mg/I Coffein kann noch sicher quantitativ erfaßt werden. Die Nachweisgrenze liegt bei 0,1 mg/1.

---

A quantitative micromethod for the caffeine determination

Summary A combined procedure with thin-layer-chromatography and densitometry is described for the quantitative estimation of caffeine in biological material. This method ist applicable in the nanogram range. Test samples of less than 100 l may be used. The samples (capillary-blood) are extracted with the same volume of chloroform. Caffeine is separated from interfering compounds by thin-layer-chromatography. Commercial silica-60-plates with chloroform/acetone (9 + 1; v/v) as solvent are used. The running time is about 30 min. The quantitative densitometric determinations are performed in the remission mode at 273 nm. In the range from 10 to 60 ng/spot the calibration curve is linear. Accurate quantitative data will be obtained even at concentrations of 1 mg/1 caffeine. The detection limit is at about 0.1 mg/1.

     

Development of an interlocked nail for segmental defects in the rabbit tibia

Previous animal models have been developed to study intramedullary nailing for challenging segmental defects in the tibia. In large animals, interlocked nail fixation created a stable environment suitable to study new bone growth technologies placed in the defect. To our knowledge, there are no comparable interlocked tibial defect models for the rabbit in which new technologies could be evaluated. Such a model would be helpful since the rabbit is a popular initial model for orthopedic research studies owing to its wide availability and low cost. While numerous studies have nailed the rabbit tibia, all were non-locked implants that allowed some degree of instability between the fracture fragments. In addition, the non-locked nails were constructed of stainless steel, whereas human nails are increasingly made from titanium alloy. In the current study, an interlocked titanium nail was developed for the rabbit tibia. It was implanted in cadaver tibiae and subjected to fatigue cycling in combined compression and bending at physiologic levels to 21,061 cycles. This duration is estimated to represent 12 weeks of gait by the animal. Before and after fatigue cycling, monotonic testing was performed in compression and bending at physiologic levels. The intact contralateral limbs served as controls. All limbs completed the cycling; the instrumented limbs exhibited interfragmentary cyclic strain amplitudes during fatigue (616 +/- 139 micro-strain), which was significantly greater than the control limbs (136 +/- 35 microstrain). Monotonic strain amplitudes for the test limbs in bending and compression were 4839 +/- 1028 and 542 +/- 122 microstrain, respectively; corresponding values for the control bones were 407 +/- 118 and 95 +/- 38 microstrain, respectively. These data are similar to those presented in prior studies in larger bone models. The current study presents one method for interlocked nail fixation for this complex tibial shaft fracture in a small animal.     

Correlation between machining direction,cutter geometry and step-over distance in 3-axis milling: Application to milling by zones

Computer-Aided Manufacturing (CAM) occupies an increasingly important role in engineering with all it has to offer in terms of new possibilities and improving designer/manufacturer productivity. The present study addresses machining of free-form surfaces on a 3-axis NC machine tool. There have recently been a large number of studies devoted to planning tool paths on free-form surfaces with various strategies being adopted. These strategies are intended to increase efficiency by reducing the overall length of machining. Often, the choice of the cutter is arbitrary and the work focuses on planning. In order to boost productivity, the present work offers assistance in choosing the cutting tool, the machining direction and cutting by surface zones, adopting a milling strategy by parallel planes. To do so, a comparison is made between milling using a spherical end milling cutter and a torus end milling cutter with the same outer radius. This comparison relates to the radius of curvature of the trace left by the cutter at the point of contact between the tool and the workpiece in relation to the direction of feed motion.     

Media coverage in times of political crisis: A text mining approach

At the year end of 2011 Belgium formed a government, after a world record breaking period of 541 days of negotiations. We have gathered and analysed 68,000 related on-line news articles published in 2011 in Flemish newspapers. These articles were analysed by a custom-built expert system. The results of our text mining analyses show interesting differences in media coverage and votes for several political parties and politicians. With opinion mining, we are able to automatically detect the sentiment of each article, thereby allowing to visualise how the tone of reporting evolved throughout the year, on a party, politician and newspaper level. Our suggested framework introduces a generic text mining approach to analyse media coverage on political issues, including a set of methodological guidelines, evaluation metrics, as well as open source opinion mining tools. Since all analyses are based on automated text mining algorithms, an objective overview of the manner of reporting is provided. The analysis shows peaks of positive and negative sentiments during key moments in the negotiation process.     

Temperature stability of thin anodic oxide films in metal/insulator/metal structures: A comparison between tantalum and aluminium oxide

The dielectric breakdown of thin (d = 3–4 nm) aluminium and tantalum oxide films was investigated by means of current voltage plots in metal/insulator/metal systems. Dielectric breakdown field strengths, E_DB, of 0.6 GV m^− 1 were found for both oxide types at room temperature. Differences appear in the temperature dependence of E_DB. Tantalum oxide films show an unchanged breakdown behaviour for temperatures up to 420 K while aluminium oxide films lose already 80% of their E_DB value in the same temperature range. Time-resolved investigations of the electric breakdown revealed intermediate states of both oxide types which were stable for several ms being characterized by an enhanced tunnel current. The breakdown voltage clearly scales with the oxide thickness for both oxide types.     

ArcFVS:An integration of a Geographic Information System and Forest Vegetation Simulator

This paper presents the design and implementation of an integrated application program called ArcFVS that links the Forest Vegetation Simulator (FVS) and a Geographic Information System (GIS) to realize spatial selection of input files and graphic display of modeling output. Data for testing and running the model came from the U.S. Forest Service's Forest Inventory and Analysis (FIA) Database and were also collected in field surveys in north-central Indiana. ArcFVS 1.0 is designed using the ArcGIS software from the Environmental Systems Research Institute (ESRI) and the Visual Basic for Applications (VBA) programming environment to manipulate ESRI's ArcObjects. The resulting product offers custom functions as commands in a new menu or as tools on a new toolbar. They are used to: select spatially or by attribute the forest plots to be projected by FVS, create the FVS input files for the selected plots and display in a geospatial environment different types of FVS output (text output files, tables with variables of interest and visualization image files). Advantages of ArcFVS 1.0 include the new GIS capabilities, enhanced format translation functions and the standardized programming environment.     

ArcFVS: An integration of a Geographic Information System and Forest Vegetation Simulator

This paper presents the design and implementation of an integrated application program called ArcFVS that links the Forest Vegetation Simulator (FVS) and a Geographic Information System (GIS) to realize spatial selection of input files and graphic display of modeling output. Data for testing and running the model came from the U.S. Forest Service’s Forest Inventory and Analysis (FIA) Database and were also collected in field surveys in north-central Indiana. ArcFVS 1.0 is designed using the ArcGIS software from the Environmental Systems Research Institute (ESRI) and the Visual Basic for Applications (VBA) programming environment to manipulate ESRI’s ArcObjects. The resulting product offers custom functions as commands in a new menu or as tools on a new toolbar. They are used to: select spatially or by attribute the forest plots to be projected by FVS, create the FVS input files for the selected plots and display in a geospatial environment different types of FVS output (text output files, tables with variables of interest and visualization image files). Advantages of ArcFVS 1.0 include the new GIS capabilities, enhanced format translation functions and the standardized programming environment.     

Considering Prework on Industrial Projects

Prefabrication, preassembly, modularization, and off-site fabrication, collectively termed as prework have become more viable with recent advances in design and information technologies. These construction methods offer a substantial opportunity to improve project performance when circumstances merit. Successful implementation of these methods on a particular project requires systematic analysis and early decision making based on specific factors of the project. This paper identifies those factors influencing decisions on the use of prework, and current industry practices for evaluating the applicability of prework on industrial projects. It then presents a decision framework to assist industry practitioners with evaluating the applicability of prework on their project, and describes a computerized tool to aid project teams in the decision-making process. The developed framework and tool are useful and effective in the decision-making process, and easy to use, as validated by practitioners in the industry.     

Influence of Social Support on Adaptation to Surgery.

The authors investigated the influence of patients' social support on subjective and objective stress indicators before, during, and after surgery. The sample consisted of 42 male and 42 female patients. Social support as perceived by the patients was measured by a surgery-specific inventory with the Emotional Support and Informational Support subscales. Perioperative adaptation was assessed by self-reported anxiety, the amount of narcotics needed for anesthesia induction, and the length of the postoperative stay. Results demonstrated that patients who scored high on social support showed less anxiety, received lower doses of narcotics, and had a shorter hospital stay than did patients with low support. However, gender was a moderator of some of these associations. Compared with men, women exhibited more relationships that were in accordance with the hypotheses. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Multivariate Modeling of Age and Retest in Longitudinal Studies of Cognitive Abilities.

Longitudinal multivariate mixed models were used to examine the correlates of change between memory and processing speed and the contribution of age and retest to such change correlates. Various age- and occasion-mixed models were fitted to 2 longitudinal data sets of adult individuals (N > 1,200). For both data sets, the results indicated that the correlation between the age slopes of memory and processing speed decreased when retest effects were included in the model. If retest effects existed in the data but were not modeled, the correlation between the age slopes was positively biased. The authors suggest that although the changes in memory and processing speed may be correlated over time, age alone does not capture such a covariation. (PsycINFO Database Record (c) 2010 APA, all rights reserved)