Modeling net energy efficiencies as quantitative characteristics in lactating cows

To date, researchers have measured net efficiencies of energy conversion using data from animals in energy chambers. The expense of this approach prevents the establishment of a large data base for quantitative studies. Our purpose was to investigate models that would enable us to use data collectable in normal field conditions to compare dairy cattle for their net energetic efficiency. Data from 357 Holstein cows in seven herds and in various parities consisted of daily measures of DM intake, net energy intake, milk production, biweekly measures of milk components, and bimonthly BW. Eighteen alternative multiple regression models were fitted to each of the cows to estimate simultaneously net efficiency of energy conversion for maintenance, lactation, pregnancy, and BW change during positive energy balance period, negative energy balance period, and whole lactation. Results from several fitted models approximated closely literature results based on data from cows in energy chambers. These comparative results suggest that it is possible to estimate efficiency of energy conversion on individual cows using data obtained from normal animal management situations.     

3D-Printed Broadband Dielectric Tube Terahertz Waveguide with Anti-Reflection Structure

We demonstrate broadband, low loss, and close-to-zero dispersion guidance of terahertz (THz) radiation in a dielectric tube with an anti-reflection structure (AR-tube waveguide) in the frequency range from 0.2 to 1.0 THz. The anti-reflection structure (ARS) consists of close-packed cones in a hexagonal lattice arranged on the outer surface of the tube cladding. The feature size of the ARS is in the order of the wavelength between 0.2 and 1.0 THz. The waveguides are fabricated with the versatile and cost efficient 3D-printing method. Terahertz time-domain spectroscopy (THz-TDS) measurements as well as 3D finite-difference time-domain simulations (FDTD) are performed to extensively characterize the AR-tube waveguides. Spectrograms, attenuation spectra, effective phase refractive indices, and the group-velocity dispersion parameters β ₂ of the AR-tube waveguides are presented. Both the experimental and numerical results confirm the extended bandwidth and smaller group-velocity dispersion of the AR-tube waveguide compared to a low loss plain dielectric tube THz waveguide. The AR-tube waveguide prototypes show an attenuation spectrum close to the theoretical limit given by the infinite cladding tube waveguide.     

A sampling expansion for nonbandlimited signals in chromatic derivatives

In this paper, we construct infinite-band filterbanks for perfect reconstruction (PR) using Hermite polynomials and Hermite functions. The analysis filters are linear combinations of derivative operators based on these polynomials-the so-called chromatic derivative filters. Together with the synthesis filterbanks, they give PR for a large class of signals that may have infinite bandwidth. Several other related filterbanks are discussed as well. The error in reconstruction for finite-channel chromatic derivative filterbanks is calculated. Examples are given to demonstrate the use of these chromatic filterbanks.     

Mikromethode zur quantitativen Bestimmung von Coffein

Zusammenfassung Zur quantitativen Bestimmung von Coffein in biologischem Material wird ein kombiniertes Verfahren aus Dünnschichtchromatographie und Densitometrie beschrieben. Das Verfahren läßt Bestimmungen im Nanogramm-Bereich zu. Das Probenvolumen liegt unter 100 l.Die Proben — Capillarblut — werden zunächst mit dem gleichen Volumen Chloroform extrahiert. Anschließend wird das Coffein mittels Dünnschichtchromatographie von Begleitstoffen und störenden Substanzen abgetrennt. Es werden Kieselgel-60-Fertigplatten und Chlorofom/Aceton (9 + 1; v/v) als Fließmittel verwendet, dabei beträgt die Laufzeit 30 min.Die quantitative densitometrische Auswertung erfolgt durch Remissionsmessung bei 273 nm. Im Bereich von 10–60 ng Coffein/Fleck verläuft die Eichkurve linear. 1 mg/I Coffein kann noch sicher quantitativ erfaßt werden. Die Nachweisgrenze liegt bei 0,1 mg/1.

---

A quantitative micromethod for the caffeine determination

Summary A combined procedure with thin-layer-chromatography and densitometry is described for the quantitative estimation of caffeine in biological material. This method ist applicable in the nanogram range. Test samples of less than 100 l may be used. The samples (capillary-blood) are extracted with the same volume of chloroform. Caffeine is separated from interfering compounds by thin-layer-chromatography. Commercial silica-60-plates with chloroform/acetone (9 + 1; v/v) as solvent are used. The running time is about 30 min. The quantitative densitometric determinations are performed in the remission mode at 273 nm. In the range from 10 to 60 ng/spot the calibration curve is linear. Accurate quantitative data will be obtained even at concentrations of 1 mg/1 caffeine. The detection limit is at about 0.1 mg/1.

     

Quality of service for voice over IP in networks with congestion avoidance

This paper assesses the impact of active queue management schemes on the quality of service of voice over Internet protocol applications. A new analytical method based on a fixed point approach to estimate the end-user satisfaction is proposed. The results obtained were validated using discrete event simulation techniques. In all the studied cases, it was observed a great deal of agreement between the analytical results and the results obtained through simulation. The theoretical predictions, as well as the presented empirical evidences confirm, as demonstrated in previous works, that the use of active queue management offers better quality of service than the traditional queue control mechanisms used in Internet. From these results, we may reasonably conclude that the presented method can be used for network design in the presence of voice traffic.     

Reliability considerations of III-nitride microelectronic devices

The success of III-nitride optoelectronic devices paths the way towards emerging devices in microelectronics. These devices are currently at the threshold to commercialization, therefore reliability considerations are becoming increasingly important. This paper reviews the material and process technology of III-nitride microelectronic devices in the scope of reliability. Since statistical reliability data are lacking in the current state of research the review starts with a summary of how reliability can be designed into process modules being relevant for microelectronic devices. This includes a discussion of the most important issues of material growth, metallization, implantation, dry etching and surface passivation. The subsequent chapter focuses to microelectronic devices and highlights technological challenges that have to be met in order to obtain reliable devices. Finally, results of lifetime experiments (thermal aging) demonstrate that III-nitride devices have the potential for reliable operation even at elevated temperatures up to 400°C.     

Crystallization kinetics of Sn40Se60 thin films for phase change memory applications

The crystallization kinetics of Sn₄₀Se₆₀ thin films has been successfully investigated using sheet resistance versus temperature measurements. Thermal evaporation was used to deposit the films on ordinary glass substrates. The crystallization temperature for Sn₄₀Se₆₀ thin film was found to be 156.6 ± 0.3 ℃. In the as-deposited state, the sheet resistance was found to be 195 MΩ, this value declined to 1560 Ω/口 upon annealing. The value of activation energy obtained from the Kissinger plot was 0.62 ± 0.07 eV. From the results obtained, Sn₄₀Se₆₀ is a promising alloy for PCM application because of its high electrical contrast, high crystallization temperature, and relatively high activation energy.     

Wafer-level packaging technology for high-Q on-chip inductors and transmission lines

In the current trend toward portable applications, high-Q integrated inductors have gained considerable importance. Hence, much effort has been spent to increase the performance of on-chip Si inductors. In this paper, wafer-level packaging (WLP) techniques have been used to integrate state-of-the-art high-Q on-chip inductors on top of a five-levels-of-metal Cu damascene back-end of line (BEOL) silicon process using 20-/spl Omega//spl middot/cm Si wafers. The inductors are realized above passivation using thick post-processed low-K dielectric benzocyclobutene (BCB) and Cu layers. For a BCB-Cu thickness of 16 /spl mu/m/10 /spl mu/m, a peak single-ended Q factor of 38 at 4.7 GHz has been measured for a 1-nH inductor with a resonance frequency of 28 GHz. Removing substrate contacts slightly increases the performance, though a more significant improvement has been obtained by combining post-processed passives with patterned ground shields: for a 2.3-nH above integrated-circuit (above-IC) inductor, a 115% increase in Q/sub BW//sup max/ (37.5 versus 17.5) and a 192% increase in resonance frequency (F/sub res/: 12 GHz versus 5 GHz) have been obtained as compared to the equivalent BEOL realization with a patterned ground shield. Next to inductors, high-quality on-chip transmission lines may be realized in the WLP layers. Losses below -0.2 dB/mm at 25 GHz have been measured for 50-/spl Omega/ post-processed coplanar-waveguide lines, above-IC thin-film microstrip lines have measured losses below -0.12 dB/mm at 25 GHz.     

Radio Access in a System Beyond 3G

This paper gives an overview of the envisaged requirements and building blocks for mobile communication systems beyond 3G (B3G). It analyzes the drivers for such a system taking into consideration the key areas “services”, “network” and “radio” and presents possible corner stones for an appropriate radio interface. Hence it gives an overview how a future system B3G may look like.