Water flux,DSC, and cytotoxicity characterization of membranes of cellulose acetate produced from sugar cane bagasse,using PEG 600

Summary In this article, cellulose acetate produced through the homogeneous acetylation of sugar cane bagasse cellulose was used to produce membranes, using poly(ethyleneglycol) 600 (PEG 600) as an admixture. The membranes were characterized using water flux measurements (Payne’s cup), differential scanning calorimetry (DSC) and neutral red uptake (cytotoxicity). The results showed that PEG 600 acts as a crystallinity inductor and/or pore former in the cellulose acetate matrix. The induction of crystallinity is important for this system since it had not been reported on the literature yet. The results also demonstrated that the studied membranes present a nontoxic behavior.     

Analytical Determination of the Distribution of Polishing Time over the Surface of Polished Tiles

Several kinds of glossiness pattern can be seen on the surface of porcelain stoneware tiles right after the polishing process, as a function of the kinematics performed by the polishing heads. For the newest generation of industrial polishing trains, where a transverse oscillation is included, there is still a great need for literature about the resulting patterns. This paper intends to find the spatial distribution of time under polishing analytically using the kinematics equations involved in the polishing process. The measured values of glossiness collected from three polished tiles are also presented. The importance of adopting a good kinematics for the polishing process has been highlighted, and the equations developed herein are useful tools for further attempts at optimizing the polishing process.     

Undecidability of accordance for open systems with unbounded message queues

We study asynchronously communicating open systems modeled as Petri nets with an interface. An accordance preorder describes when one open system can be safely replaced by another open system without affecting some behavioral property of the overall system. Although accordance is decidable for several behavioral properties if we assume a previously known bound on the maximal number of pending messages, we show that it is not decidable without this assumption.     

15 years of processing and dissemination of SPOT-VEGETATION products

Throughout the VEGETATION programme, the Flemish Institute for Technological Research (VITO) uninterruptedly hosted the prime user segment of both VEGETATION 1 and VEGETATION 2 multispectral instruments on board the Satellite Pour l’Observation de la Terre 4 (SPOT 4) and SPOT 5 satellites. Operational since the launch of SPOT 4 in March 1998, and foreseen to continue at least until the end of the SPOT 5 mission (anticipated in spring 2014), this user segment comprises a processing facility (PF), actively receiving, processing, correcting, archiving, and distributing the VEGETATION data and derived added-value products. First and foremost, the VEGETATION programme has been serving the needs of operational users – both institutional and commercial – requesting data in near-real time. However, scientific and educational users too benefited significantly, in particular from VEGETATION’s unique time series of the Earth’s land cover, and more specifically the vegetation cover. Over the years, the centralized archive houses processed data covering the equivalent of 11,000 times the Earth’s surface, and delivered more than 50 terapixels to around 10.000 users. As such, VEGETATION’s mission is a prime example of what Europe wants to achieve through the Global Monitoring for Environment and Security (GMES) initiative: truly operational services providing reliable and up-to-date information.

This article describes the processing facility, the way the data and products are archived, the different dissemination channels as well as the data policy adopted and the users served. One of the recent evolutions, the development of an entirely new product distribution facility (PDF), implemented as part of the Project for On-Board Autonomy – Vegetation (PROBA-V) user segment is discussed.     

Scalable Realistic Rendering with Many‐Light Methods

Recent years have seen increasing attention and significant progress in many‐light rendering, a class of methods for efficient computation of global illumination. The many‐light formulation offers a unified mathematical framework for the problem reducing the full lighting transport simulation to the calculation of the direct illumination from many virtual light sources. These methods are unrivaled in their scalability: they are able to produce plausible images in a fraction of a second but also converge to the full solution over time. In this state‐of‐the‐art report, we give an easy‐to‐follow, introductory tutorial of the many‐light theory; provide a comprehensive, unified survey of the topic with a comparison of the main algorithms; discuss limitations regarding materials and light transport phenomena and present a vision to motivate and guide future research. We will cover both the fundamental concepts as well as improvements, extensions and applications of many‐light rendering.     

Nitrogen transformations during hydrolysis and nitrification of urea

Nitrogen transformations occurring in ten soils fertilized with urea were determined during incubation in the laboratory for four weeks. Urea was applied at one rate, but with different placement methods. Urea was applied in solution, as prills with a 1 cm grid spacing and as prills with no spacing. Unfertilized soils and soils amended with KNO₃ solution were included as controls.Nitrite accumulated in the majority of soils treated with urea, and the maximum nitrite concentration measured was directly related to initial soil pH. Cumulative gaseous N losses as percentages of applied N were: NH₃, 0-59.6; N₂, 0-4.9; N₂O, 0-9.9; KMnO₄-N, 0-1.3; CH₃ONO, 0-<0.1. No gaseous N evolution was detected in control treatments. Gaseous N losses were correlated with soil pH (NH₃) maximum NO ₂ ^- concentration (N₂, N₂O, KMnO₄-N) and organic C content (N₂, N₂O). Fertilizer placement effects were generally not significant and were small in comparison with differences between soils.

---

Resumo Foram determinadas, durante incubação em laboratório por quatro semanas, as transformações do nitrogênio ocorridas em dez solos fertilizados com uréia. A uréia foi aplicada a um só nivel, mas com diferentes métodos de aplicação: em solução e em grânulos com 1 cm de espaçamento de grade e em grânulos sem espaçamento. Solos não fertilizados e solos corrigidos com solução de KNO₃ foram incluidos como controles.O nitrito acumulado na maioria dos solos tratados com uréia e a concentração máxima de nitrito medido foram diretamente relacionados ao pH inicial do solo. As perdas cumulativas de N gasoso tomadas em percentagens de N aplicado foram: NH₃, 0-59.6; N₂, 0-4.9; N₂O; 0-9.9; KMnO₄-N, 0-1.3; CH₃ONO, 0-<0.1. Não foi detectada liberação de N gasoso nos tratamentos de controle. As perdas de N gasoso foram relacionadas com o pH do solo (NH₃), concentração máxima de NO ₂ ^- (N₂, N₂O, KMnO₄-N) e teor de C orgânico (N₂, N₂O). Efeitos da aplicação de fertilizante não foram de um modo geral significativos e foram pequenos em comparação com as diferenças entre os solos.

     

Study of the Catalytic Ozonation of Humic Substances in Water and Their Ozonation Byproducts

It is shown that using transition metals, especially Mn(II) and Ag(I), during ozonation of humic substances in water allows important reductions in the content of organic matter. Characterization of the organic compounds resulting from ozonation was made by concentrating the sample through liquid-liquid extraction or derivation with PFBOA.HCl, along with the GC/MS and GC/ECD techniques. In total, 110 different organic compounds were identified using GC/MS; mainly carboxylic acids, aromatics, hydrocarbons, aldehydes, ketones, and furan-carboxylic acids. The percentages of elimination or formation levels reached during ozonation are discussed.     

Methanol Selective Oxidation to Formaldehyde over Iron-Molybdate Catalysts

This review deals with the important industrial reaction of formaldehyde manufacture by methanol oxidation over iron molybdate catalysts. Detailed reference is made to the used catalyst, preparation techniques (coprecipitation, sol-gel like, mechanical mixing, etc.) including unsupported and supported catalysts, promoters and characterization methods. The controversial active phase assignment (stoichiometric versus Mo rich iron molybdate) is discussed. The proposed reaction mechanisms and kinetic laws for the main and side reactions are examined. The catalyst deactivation processes are reviewed and the role of Mo excess on these processes is underlined. Finally conclusions and perspectives are presented.     

A 60‐GHz on‐chip slot‐array antenna in integrated‐passive‐device technology for antenna‐in‐package applications

A new millimeter‐wave antenna structure on a low‐cost, production platform integrated passive device technology is presented. The antenna consists of a 2‐by‐1 array of slot antennas at 60 GHz. An in‐house developed on‐chip antenna measurement setup was used to characterize the fabricated antenna. The measurement results show an antenna gain of more than 5 dBi with a return loss of 18 dB at 60 GHz. The better‐than‐10‐dB impedance bandwidth of the antenna covers the 60‐GHz unlicensed band from 57 to 64 GHz. The 3‐dB beamwidths of the antenna are 105° and 76° at E‐plane and H‐plane at 60 GHz, respectively. The size of the die of the antenna is 2 mm × 4.5 mm. © 2013 Wiley Periodicals, Inc. Int J RF and Microwave CAE 24:155–160, 2014.     

Pheromone biosynthesis in lepidoptera

Pheromone components for many lepidopteran species are produced by the use of unique chain-shortening and 9, 10, and 11 desaturase systems. Correlations in the Tortricidae indicate that the pheromone components derived from 9 and 01 desaturases are found in the more primitive species (those possessing morphological plesiomorphies). The precise blend ofZ andE acetates in a number of species is regulated in the final reduction sequence from acyl intermediates. Preliminary research has been conducted on the characterization of the various desaturase enzymes used and on the important blend regulating sequence. Initial purification work on the 11 desaturase enzyme found in the cabbage looper moth is reported.