封闭循环TEA CO2激光器用催化剂的实验研究

在不同的催化剂和不同温度的条件下,用磁氧分析仪监测了封离型TEA C0₂激光器中O₂含量随时间或脉冲次数的变化。对实验现象进行了分析。对几种催化剂的特性给出了详细的比较。     

Weber定律下尺度空间的自适应构建

在Weber定律的启发下提出一种基于"恰可识别差异"的尺度空间自适应构建方法。Weber定律认为人类感知模式不仅与刺激的变化有关,而且与原刺激强度有关。基于此观点,在图像尺度空间的构建过程中,首先以Marr视觉理论的屋脊型边缘和阶梯型边缘的特征之和计算图像的信息量,再通过实验获得人类视觉能感知到"恰可识别差异"时的图像信息量变化,最后通过曲线拟合自适应构建图像的尺度空间。实验结果表明,该方法充分体现了人类视觉感知特性,与其他尺度空间构建方法相比,在目标匹配实验中,匹配数目提升了25%以上;在去噪实验中,本算法的去噪效果良好。     

黄冈市农村卫生人才培养的现状与对策

本文采取问卷调查和文献查阅相结合的方式,对黄冈市卫生专业技术人员队伍现状进行了调查和分析,剖析了黄冈市农村卫生人才培养的方法和经验,提出了切实可行的农村卫生人才培养的对策与建议。     

基于遗传算法的平流层飞艇路径规划设计

利用传统线性化方法--小扰动法将模型线性化,结合平流层飞艇的工作特性,把飞艇上升运动看成是纵向基准运动和横侧向扰动运动.然后采用最小值原理,根据飞艇的控制量和边界条件,设计和优化飞艇的上升轨迹,其性能目标函数是从初始点到目标点运动过程中能量消耗最小.利用遗传算法,在运动模型和控制量变化的共同约束作用下,求取目标函数的最小值.最后根据飞艇实际工作过程,对仿真结果分析表明,该方法具有实际应用价值.     

关于Photoshop插件的SAR图像处理探究

SAR图像处理主要包括相干斑抑制、特征提取等,如果在使用Photoshop插件SAR图像处理图片,将主要精力集中于算法的设计和优化方面,可以尽量减少在用户界面、内存管理和基本的图像操作方面的编程,既可以实现多种图像处理,又容易实现功能的充分扩大与填充,从而在最短的时间内做做多的事。     

Effect of nitrogen and nickel on the stability of an Fe-12Cr-23Mn austenitic steel

The effect of nitrogen and nickel on the austenite stability and the structural changes as a result of cold work of an Fe-12Cr-23Mn alloy steel has been examined by transmission electron microscopy and X-ray analysis. Prestrain was performed either at room temperature or at 200° C. Final strain was carried out at liquid nitrogen temperature. The volume fraction of strain-induced martensite decreased by 40% and 12% due to the addition of 2.43% Ni and 0.11% N, respectively, despite whether prestrain was performed or not. The mechanisms are discussed in terms of the phase, stacking faults, dislocation cells and dislocation tangles induced by prestrain and final strain.     

Stability and work hardening of an Fe-12Cr-23Mn austenitic steel

The effect of pre-strain on the strain-induced martensitic transformation of an Fe-12Cr-23Mn austenitic steel has been investigated through transmission electron microscopy and X-ray analysis. Pre-strain was performed either at room temperature or at 200° C. Final strain was carried out at liquid-nitrogen temperature. The phase was shown to form on {1 1 1} planes of the austenite matrix predominantly by overlapping of stacking faults. The martensite transformation sequence was . Nucleation of the phase mainly occurred at intersections of bands. Austenite stability was shown to increase by pre-strain at 25° C or 200° C. Pre-strain at 200° C has a greater effect on austenite stability than does pre-strain at 25° C. The mechanism was discussed in terms of martensite transformation rate and various substructures introduced during straining. Work hardening was shown to depend on the degree of pre-strain and final strain. The correlation between work hardening and substructures introduced during straining was examined.     

高温钎料PdCu-Ti在氧化铝陶瓷上的润湿性及界面反应

本文采用座滴法试验研究了合金系统ＰｄＣｕ－Ｔｉ在Ａｌ２Ｏ３上润湿性的变化规律，探讨了界面冶金及结合等行为，运用热力学理论对结果进行了分析，随Ｔｉ含量的增加及Ｐｄ含量的减少润湿角逐渐降低，Ｔｉ的加入使界面发生了一个双重变化；液相侧富氧，钛吸收层的生成及随后的固相侧氧化钛的生成，只有界面上生成一氧化钛，才能有较好的润湿行为和较强的结合力。     

电流密度对声电沉积生物活性透钙磷石涂层结构和形貌的影响

通过声电沉积工艺在碳／碳复合材料表面制备了生物活性透钙磷石涂层，采用SEM、FFIR、XRD研究了超声场中电流密度对涂层组成结构和形貌的影响。发现在一定工艺条件下，随电流密度增加，涂层的平均晶粒尺寸减小，致密度增加；当电流密度小于l0mA／cm^2时涂层形貌为片状，l0mA／cm^2-26mA／cm^2时为粒状，32mA／cm^2时为花菜心状。且涂层中透钙磷石晶体的择优取向也发生变化，择优晶面依次为(021)、(111)、(220)。同时还讨论了涂层微观结构变化机理。     

砷、氟污染地下水净化技术进展

砷、氟污染水体及其共存问题是环境领域的热点问题,长期暴露其中对公众的身体健康存在巨大威胁.文章梳理了砷、氟污染物的来源,及砷、氟污染水体的分布与危害,并按吸附、离子交换、反渗透、电絮凝、膜法等分析了用于砷、氟处理的各类技术手段的利弊,以期为后续水体中砷、氟污染物的高效去除提供参考.