Scaling laws and polystyrene networks: a quasi-elastic light scattering study

Randomly crosslinked networks with a range of crosslink densities were prepared by γ-irradiation. Quasielastic light scattering measurements were made on the gels swollen to equilibrium in cyclohexane at 308, 318 and 333 K. The longitudinal osmotic modulus M_os was obtained from the intensity of the dynamically scattered light, and the cooperative diffusion coefficient D_c calculated from the relaxation rate of the autocorrelation function. The concentration dependence of these parameters at the theta temperature was found to be consistent with the scaling predictions, but at higher temperatures where excluded volume conditions prevail, deviations from scaling behaviour were observed. These discrepancies are probably caused by defects in the network structure.     

Effect of curing and heat treatment history on the dynamic mechanical response and the pore structure of hardened cement paste

Results for the dynamic mechanical response of hcp (hardened cement paste) specimens as a function of the curing-heat treatment history are reported. The temperature range investigated is from ?160°C to +100°C. In the temperature range from +25°C to +100°C, specimens cured at room temperature (R-cured) show a partially irreversible transition (reduction) in E. There are two low temperature transitions: the “adsorbate transition” between ?160°C and ?6-°C, and the “capillary transition” between ?50°C and 0°C. Both of these transitions are significantly affected by the curing-heat treatment history. Furthermore, both the E-modulus and the BET (water) surface area decrease as the severity of heat treatment increases.     

Intramolecular vs intermolecular formation of bityrosine upon photoreaction of poly(l-tyrosine) in dilute aqueous solution

Summary The molecular weight dependence of the rate of the formation of bityrosine upon irradiation of poly(L-tyrosine) at 300 nm has been investigated in dilute aqueous solution, pH 12. The samples studied were the monodisperse monomer, dimer, trimer, and hexamer, as well as two polydisperse polymers with average degrees of polymerization of 10² and 10³. The reaction is predominantly intermolecular in the monodisperse oligomers, but it is predominantly intramolecular in the two polymers. The intramolecular reaction in the polymers involves phenolic rings on monomers i and i+j, with j>5. The steric restraints imposed by the backbone of the chain make it unlikely that two rings will approach one another with the appropriate geometry for reaction if j<5.     

Monitoring the cure of a composite matrix resin with microdielectrometry

This paper presents a study of the cure of glass and graphite fiber epoxy composites using dielectric monitoring techniques. Initial results reported here deal with the neat resin and the relationship between its conductivity and corresponding changes in glass transition temperature during cure.     

Interaction of Silver/Palladium Electrodes with Lead-and Bismuth-Based Electroceramics

In this study the phase relations between Pd or 70Ag/30Pd electrode systems with commercially important Bi-or Pb-based oxides were determined to establish the conditions under which detrimental interfacial chemical reactions may occur. For the reaction of Pd with Bi compounds, PdBi₂O₄ formation was observed if the reaction proceeded at temperatures less than 835°C. At higher temperatures a Pd (Bi) alloy formed containing the maximum solubility of the Bi, i.e., 16 at.%. For the reaction of Pd with Pb compounds, a Pd (Pb) alloy formed which in all instances exhibited the maximum solubility of the Pb, i.e., 14 at.%. These reactions had an adverse effect on the local stoichiometry and composition of the dielectric, causing depletion of Bi or Pb. Studies on commercial capacitor dielectrics from DuPont (X7R and Z5U formulations) and Pb (Mg_1/3Nb_2/3)O₃ showed that the use of Pd electrodes decreased the dielectric constant substantially, which was due to the formation of a low permittivity phase in series connectivity with the unaltered dielectric.     

The effect of sulfur on the dissociative adsorption of methane on nickel

The dissociative adsorption of methane was carried out on a Ni(100) surface covered with various amounts of sulfur under the high incident flux conditions of 1 Torr methane. Auger electron spectroscopy was used to measure the rate of carbon buildup and thus to determine the initial methane decomposition rates on the surface. It was shown that the sulfur atoms poison this reaction by a simple site-blocking process. These results are consistent with the activated dissociative adsorption of methane on Ni(100) occurring via a direct adsorption process.     

A customised approach to determining the geomorphic effectiveness of small flood events in a regulated river

The construction of dams significantly alters flow and sediment regimes with subsequent deleterious effects on the morphological and ecological character of rivers. Effective experimental floods can ameliorate the downstream geomorphic impacts of dams. The traditional view is that large floods are required to perform effective geomorphic work, and the geomorphic outcomes of small floods are often overlooked. Many river restoration frameworks do not consider small floods. Yet, there is evidence that the hydrological characteristics that ameliorate specific geomorphic impacts in a river are unique to each river, and a customised approach to setting the right mix of floods (including small experimental floods) is needed. In this study, we modify an existing flood effectiveness model developed for large floods, for determining the geomorphic effectiveness of small floods in a highly regulated Australian river. Two flood classes were added to the model (medium peak stream power and moderate total energy expenditure), and the flood power characteristics were rescaled to reflect the relative difference in the magnitude of the small floods and the magnitude of the geomorphic work performed. Using a step‐wise approach, this customised model determined the geomorphic effectiveness of small floods. The best flood for ameliorating the geomorphic impacts of flow regulation had medium to long duration (10 to 51 days), high peak unit stream power (77 to 123 Wm^?2) and moderate to large total energy expenditure (78,600 to 342,320 × 10³ J). This approach to determining flood effectiveness for small floods is applicable to other geomorphically impacted river channels downstream of dams and can be used to inform experimental flood releases for geomorphic outcomes.     

Protecting Business Secrets in an EDI/CALS Environment

ABSTRACT

Communicating with confidential data requires special attention in a mobile agents environment, especially when the other hosts must be prevented from eavesdropping on the communication. We propose a communication model for secured communication between the agents belonging to publishers and consumers data. Confidentiality is ensured using our on-the-fly encryption-decryption sequence using ElGamal system to directly convert the message or plaintext into one that is encrypted directly with the public key of consumer. The scheme ensures that the data possessed by the agents is secured at all times when it is executing at any untrusted host. Our minimal implementation of the model with Aglets agent platform gives the first faithful picture of the happenings in the model. Finally, we also explain how the homomorphic property of ElGamal scheme can be integrated with our model for a Web-based application such as voting involving multiple agents.     

Avoiding semantic and temporal gaps in developing software intensive systems

Development of software intensive systems (systems) in practice involves a series of self-contained phases for the lifecycle of a system. Semantic and temporal gaps, which occur among phases and among developer disciplines within and across phases, hinder the ongoing development of a system because of the interdependencies among phases and among disciplines. Such gaps are magnified among systems that are developed at different times by different development teams, which may limit reuse of artifacts of systems development and interoperability among the systems. This article discusses such gaps and a systems development process for avoiding them.     

Frame-level temporal calibration of video sequences from unsynchronized cameras

This paper describes a method for temporally calibrating video sequences from unsynchronized cameras by image processing operations, and presents two search algorithms to match and align trajectories across different camera views. Existing multi-camera systems assume that input video sequences are synchronized either by genlock or by time stamp information and a centralized server. Yet, hardware-based synchronization increases installation cost. Hence, using image information is necessary to align frames from the cameras whose clocks are not synchronized. The system built for temporal calibration is composed of three modules: object tracking module, calibration data extraction module, and the search module. A robust and efficient search algorithm is introduced that recovers the frame offset by matching the trajectories in different views, and finding the most reliable match. Thanks to information obtained from multiple trajectories, this algorithm is robust to possible errors in background subtraction and location extraction. Moreover, the algorithm can handle very large frame offsets. A RANdom SAmple Consensus (RANSAC) based version of this search algorithm is also introduced. Results obtained with different video sequences are presented, which show the robustness of the algorithms in recovering various range of frame offsets for video sequences with varying levels of object activity.